大型屏蔽暗室静区静度测试初探

主要论述了如何对大型屏蔽暗室静区反射电平进行测试及各种参数的意义和测试的必要性等 。

电波暗室静区性能的分析与评估

文章从反射路径损耗、吸波材料性能、天线波束宽度等三个方面分析了影响暗室静区性能的因素,给出了暗室静度计算模型,较全面地考虑了影响暗室静区静度的各项因素,能够为暗室设计者提供科学的指导。

射频仿真系统定位误差分析

射频仿真系统是一个复杂的大系统,文中详细分析了系统内的各项误差。利用求解波印亭矢量的方法,推导了由于阵面辐射单元信号泄漏所带来的试验误差公式,进而从理论上分析了辐射单元间距对试验精度的影响。最后指出可以通过提高静区静度指标要求到达提高试验精度的目的,并研究了静区指标与被试品主瓣宽度、角模拟精度之间的关系。

Directional growth behavior of a(Al) dendrites during concentration-gradientcontrolled solidification process in static magnetic field

The large and small sized Cu（solid）/Al（liquid） couples were prepared to investigate the directional growth behavior of primary a（Al） phase during a concentration-gradient-controlled solidification process under various static magnetic fields（SMFs）.The results show that in the large couples,the α（Al） dendrites reveal a directional growth character whether without or with the SMF.However,the 12 T magnetic field induces regular growth,consistent deflection and the decrease of secondary arm spacing of the dendrites.In the small couples,the α（Al） dendrites still reveal a directional growth character to some extent with a SMF of ≤5 T.However,an 8.8 T SMF destroys the directional growth and induces severe random deflections of the dendrites.When the SMF increases to 12 T,the a（Al） dendrites become quite regular despite of the consistent deflection.The directional growth arises from the continuous long-range concentration gradient field built in the melt.The morphological modification is mainly related to the suppression of natural convections and the induction of thermoelectric magnetic convection by the SMF.

Review of gas-solid two phase flow rate-concentration detection technology

The indirect detection method basic principle of rate and concentration,application range and research results on gassolid two phase flow were discussed.The present development situation and the existing problems of rate and concentration detection technology were analyzed and summarized.Emphatically analyzed the existing problems in the industrial application and research status of electrostatic method in measuring phase concentration.Design criterion of electrostatic phase concentration sensor is given,the superiority and wide industrial application prospect of the sensor used for phase concentration measurement are clarified.

Determination of undrained shear strength using piezocone penetration test in clayey soil for bridge foundation

In order to obtain the reasonable undrained shear strength Su for geotechnical analyses of bridge foundations in Yangtze River floodplain clayey soils, a site-specific study is conducted using the imported piezocone penetration test （CPTu） with dissipation phases at the Fourth Nanjing Yangtze River Bridge construction sites. Taking the values of Su from laboratory tests as references, several existing Su-predicted methods based on CPTu are compared and evaluated. To verify the presented cone factor Nk, additional test sites are selected and examined. The results show that the values of cone factors such as Nkt, Nke, and Nau, depend on the shear test mode and disturbance. Generally, the values of Nke show more scattering than those of Nkt and N△u. For the stratified and layered sediments of the Yangtze River floodplain, it is recommended using the net cone resistance qT to estimate Su and the preliminary cone factor values Nkt are from 7 to 16, with an average of 11. It is also confirmed that the CPTu test, as a new technique in site characterization, can present reasonable parameters for bridge foundations.

STIFFNESS ANALYSIS OF THE MAIN MODULE FOR PARALLEL MACHINE TOOLS BY FINITE ELEMENT ANALYSIS

With the aid of commercial finite element analysis software package ANSYS,investigations are made on the contributions of main components to stiffness of the main module for parallel machine tools,and it is found that the frame is the main contributor.Then,influences of constraints,strut length and working ways of the main module have also been investigated.It can be concluded that when one of the main planes of the frame without linear drive unit is constrained,the largest whole stiffness can be acquired.And,the stiffness is much better when the main module is used in a vertical machine tool instead of a horizontal one.Finally,the principle of stiffness variation is summarized when the mobile platform reaches various positions within its working space and when various loads are applied.These achievements have provided critical instructions for the design of the main module for parallel machine tools.

Static and dynamic mechanical behaviour of ECO-RPC

Ecological reactive powder concrete (ECO-RPC) with small sized and differentvolume fraction steel fibers was prepared by substitution of ultra-fine industrial waste powder for50% to 60% cement by weight and replacement of ground fine quartz sand with natural fine aggregate.The effect of steel fiber volume fraction and curing ages on the static mechanical behaviour ofECO-RPC was studied. Using the split Hopkinson pressure bar technique, the dynamic mechanicalbehaviour of ECO-RPC was investigated under different strain rates. The results show that the staticmechanical behaviour of ECO-RPC increases with the increase of steel fiber volume fraction andcuring ages. The type of ECO-RPC with the substitution of 25% ultra-fine slag, 25% ultra-fine flyash and 10% silica fume is better than the others with compressive strength, flexural strength, andfracture energy more than 200 MPa, 60 MPa and 30 kJ/m^2, respectively. ECO-RPC has excellent strainrate stiffening effects under dynamic load. Its peak stress, peak strain and the area understrain-stress curve increase with the increase of strain rate. Its fracture pattern changes frombrittleness to toughness under high strain rates.

Separation of macro amounts of tungsten and molybdenum by ion exchange with D309 resin

Based on the difference in tendency to polymerize between tungsten and molybdenum, a new method using D309 resin was propounded. The batch tests indicate that the optimum pH value and contact time for the separation are 7.0 and 4 h respectively, the maxium separation factor of W and Mo is 9.29. And the experimental resules show that isothermal absorbing tungsten and molybdenum belongs to Langmuir model and Freundlich model respectively, and the absorbing kinetics for tungsten is controlled by intra-particle diffusion. With a solution containing 70 g/L WO3 and 28.97 g/L Mo, the effluent with a mass ratio of Mo to WO3 of 76 and the eluate with a mass ratio of WO3 to Mo of 53.33 are obtained after column test.

Improvements on High Current Performance of Static Induction Transistor

Methods for improving the high current performance of static induction transistor （SIT） are presented.Many important factors,such as ＂trans-conductance per unit channel width＂ θ, ＂gate efficiency＂ η, ＂sensitivity factor＂ D,and ＂intrinsic static gain＂ μ0,that may be used to describe different aspects of the electrical performance of an SIT are first defined.The dependences of electrical parameters on the structure and technological process of an SIT are revealed for the first time.The packaging technologies are so important for the improvement of high power performance of SITs that they must be paid attention.Testing techniques and circuits for measuring frequency and power parameters of SITs are designed and constructed.The influence of packaging processes in technological practice on the electrical performance of SITs is also discussed in depth.

Direct pre-stack depth migration on rugged topography

Engineering seismic exploration aims at shallow imaging which is confused by statics if the surface is uneven. Direct pre-stack depth migration （DPDM） is based on accurate elevations of sources and receivers, by which static correction is completely abandoned before migration and surely the imaging quality is remarkably improved. To obtain some artificial shot gathers, high-order staggered-grid finite-difference （FD） method is adapted to model acoustic wave propagation. Since the shot gathers are always disturbed by regular interferences, the statics still must be applied to supporting the interference elimination by apparent velocity filtering method. Then all the shot gathers should be removed back to their original positions by reverse statics. Finally, they are migrated by pre-stack reverse-time depth migration and imaged. The numerical experiments show that the DPDM can ideally avoid the mistakes caused by statics and increase imaging precision.

A 16×16 Micro Mirror Array for Optical Switches

This paper reports on the design, fabrication,and performance of a high-reflectivity large-rotation mirror array for MEMS （micro-electro-mechanical system） 16 × 16 optical switches. The mirror in the array can enlarge its rotation an- gles up to 90° and keep a steady state to steer the optical signal. According to the large-rotation behavior, an electro- mechanical model of the mirror is presented. By monolithic integration of fiber grooves and mirrors fabricated by a sur- face and bulk hybrid micromachining process, the coarse passive alignment of fiber-mirror-fiber can be achieved. The re- flectivity of the mirror is measured to be 93.1% ~96.3%. The switches demonstrate that the smallest fiber-mirror-fiber insertion loss is 2. ldB using OptiFocusTM collimating lensed fibers. Moreover,only about ＋- 0.01dB oscillating amplitude of insertion loss is provoked after the device is tested for 15min for 5-90Hz in the vertical vibration amplitude of 3mm.

Portal hypertensive colopathy is associated with portal hypertension severity in cirrhotic patients

AIM： To assess the prevalence of portal hypertension （PH） related colorectal lesions in liver transplant candidates, and to evaluate its association with the severity of PH. METHODS： Between October 2004 and December 2005, colonoscopy was performed in 92 cirrhotic liver transplant candidates. We described the lesions resulting from colorectal PH and their association with the grade of PH in 77 patients who underwent measurement of hepatic venous pressure gradient （HVPG）. RESULTS： Mean age was 55 years and 80.7% of patients were men. The main etiology of cirrhosis wasalcoholism （45.5%）. Portal hypertensive colopathy （PHC） was found in 23.9%, colonic varices in 7.6% and polyps in 38% of patients （adenomatous type 65.2%）. One asymptomatic patient had a well-differentiated adenocarcinoma. The manifestations of colorectal PH were not associated with the etiology of liver disease or with the Child-Pugh grade. Ninety percent of patients with colopathy presented with gastroesophageal varices （GEV）, and 27.5% of patients with GEV presented with colopathy （P = 0.12）. A relationship between higher values of HVPG and presence of colopathy was observed （19.9：1：6.2 mmHg vs 16.8 ± 5.4 mmHg, P = 0.045）, but not with the grade of colopathy （P = 0.13）. Preneoplastic polyps and neoplasm （P = 0.02） and spontaneous bacterial peritonitis （P = 0.006） were more prevalent in patients with colopathy. We did not observe any association between previous β-blocker therapy and the presence of colorectal portal hypertensive vasculopathy. CONCLUSION： PHC is common in cirrhotic liver transplant candidates and is associated with higher portal pressure.

Electrical properties of fly ash and its decarbonization by electrostatic separation

The basic principle of fly ash triboelectrification is analysed. The mineral electrical index and test method are introduced. The electric difference of different mineral composition of fly ash is discussed by analysis of chemical and mineral composition of fly ash in Xinwen power plant. The dielectric constant and charge-mass ratio of carbon and ash of fly ash are tested. Combined with the experimental study on rotary triboelectrostatic separation, the charged characteristic of fly ash particles with different size is gained. The results show that the dielectric constant of fly ash with different grain size decreased with the decrease of particle size, which lead to the poor electrical conductivity, Thus it can be seen that par- ticle size plays a leading role in conductivity, The charge of carbon and ash with each size increased with the decreased of particle size; and the charge-mass ratio between carbon and ash with the same size lar- ger with the decrease of size, which indicated that the finer particle size, the more favorable for triboelec- trification separation. In the same conditions, the best decarburization effect is realized when the particle size ranges from 0.038 to 0.074 ram, whose decarbonization rate and efficiency index reached 38.93% and 120.83% respectively.

Flexural fatigue strength of steel fibrous concrete containing mixed steel fibres

This paper reports investigation conducted to study the fatigue performance of steel fibre reinforced concrete (SFRC) containing fibres of mixed aspect ratio. An extensive experimental program was conducted in which 90 flexural fatigue tests were carried out at different stress levels on size 500 mm×100 mm×100 mm SFRC specimens respectively containing 1.0%, 1.5% and 2.0% volume fraction of fibres. About 36 static flexural tests were also conducted to determine the static flexural strength prior to fatigue testing. Each volume fraction of fibres incorporated corrugated mixed steel fibres of size 0.6 mm×2.0 mm×25 mm and 0.6 mm×2.0 mm×50 mm in ratio 50:50 by weight. The results are presented both as S-N relationships, with the maximum fatigue stress expressed as a percentage of the strength under static loading, and as relationships between actually applied fatigue stress and number of loading cycles to failure. Two-million-cycle fatigue strengths of SFRC containing different volume fractions of mixed fibres were obtained and compared with plain concrete.

Fabrication and catalytic behavior of hierarchically-structured nylon 6 nanofiber membrane decorated with silver nanoparticles

A hierarchically‐structured nylon 6 (PA6) nanofiber membrane decorated with silver nanoparticles (Ag NPs) was fabricated by electrospinning and impregnation methods. The as‐fabricated hierarchically‐structured Ag/PA6 nanofiber membrane (HS‐Ag/PA6 NM) exhibits a morphology in which Ag NPs are deposited on the surfaces of both thick fibers and thin fibers. The content and size of theAg NPs can be controlled by varying the concentration of the silver colloid solution. Compared with the non‐hierarchically‐structured Ag/PA6 nanofiber membrane, HS‐Ag/PA6 NM has a higher specificsurface area and exhibits a higher degradation rate for methylene blue of 81.8%–98.1% within2 h. HS‐Ag/PA6 NM can be easily recycled and exhibits good reusability. It retains a degradation rate for methylene blue of 83.5% after five consecutive cycles. The hierarchically‐structured nanofiber membrane is therefore a potential nanocatalyst.

Numerical simulation of calm water entry of flatted-bottom seafloor mining tool

The hydrodynamic problem of a two-dimensional model of seafloor mining tool entering still water vertically at constant speed was analyzed based on the velocity potential theory. For the assumption that the water entry occurs with very short time interval, the viscosity and gravity of fluid were neglected. Considering the characteristic shape of it, the seafloor mining tool was simplified as a flat-bottom body. The governing equations were the Reynolds time-averaged equations and the k-e model. Finite element analysis was undertaken using the CFD software, Fluent. The impact pressures on the bottom of the mining tool were computed based on the improved volume of fuid method （VOF）. The pressure distribution, the maximum impact pressure, and the impact duration time during the water entry of mining tool are presented at various deploying velocities, the two peak pressures in the impact process are observed, and the relationship between the maximum impact pressure and the deploying velocity is obtained. The results are compared with those based on other prediction theories and methods.

Microstructure homogeneity regulation of 7050 aluminum forgings by surface cumulative plastic deformation

To regulate the microstructure homogeneity of large aluminum structural forgings for aircraft,the surface cumulative plastic deformation was proposed.The microstructure of 7050 aluminum forgings after the surface cumulative plastic deformation was investigated by electron backscatter diffraction(EBSD),transmission electron microscopy(TEM),and X-ray diffraction(XRD).The results showed that the microstructure evolution of 7050 aluminum forgings was more sensitive to the deformation temperature than the strain rate.The dislocation density continued to increase with the decrease of the deformation temperature and the increase of the strain rate.Dislocation density and stored energy were accumulated by the surface cumulative plastic deformation.Besides,a static recrystallization(SRX)model of 7050 aluminum forgings was established.The SRX volume fraction calculated by this model was in good agreement with the experimental results,which indicated that the model could accurately describe the SRX behavior of 7050 aluminum forgings during the surface cumulative plastic deformation.

New Simple Method of Calculation of Statically Indeterminate Trusses

The paper presents a very simple method, which in two stages enables to calculate the plane statically indeterminate truss by the application of one of methods used for the force calculation in members of the statically determinate trusses. The results are obtained in a very simple and quick way. Although the force values are approximated but they are relatively very close to those, which are determined by the exact methods. The point of the two-stage calculation process of the statically indeterminate trusses is to determine schemes of two independent and simple statically determined trusses, which after superposition of their patterns will give in the result a pattern of the initial, more complex form of the statically indeterminate truss. Each of the simple truss has to be of the same clear span and the load forces have to be of the half values and they have to be applied to the same nodes like in truss of the initial structural configuration.

Study of the aerostatic and aerodynamic stability of super long-span cable-stayed bridges

With the increase of span length, the bridge tends to be more flexible, and the wind stability be- comes an important problem for the design and construction of super long-span cable-stayed bridges. By taking a super long-span cable-stayed bridge with a main span of 1 400 m as example, the aerostatic and aerodynamic stability of the bridge are investigated by three-dimensional nonlinear aerostatic and aerodynamic stability analy- sis, and the results are compared with those of a suspension bridge with a main span of 1 385 m, and from the aspect of wind stability, the feasibility of using cable-stayed bridge in super long-span bridge with a main span above l 000 m is discussed. In addition, the influences of design parameters including the depth and width of the girder, the tower structure, the tower height-to-span ratio, the side-to-main span ratio, the auxiliary piers in the side span and the anchorage system of stay cables, etc on the aerostatic and aerodynamic stability of su- per long-span cable-stayed bridges are investigated numerically; the key design parameters are pointed out, and also their reasonable values are proposed.