目的:探索磁共振成像多点非对称回波采集与迭代最小二乘法水脂分离(iterative decomposition of water and fat with echo asymmetry and the least squares estimation quantification sequence,IDEAL-IQ)和体素内不相干运动(intravoxe...目的:探索磁共振成像多点非对称回波采集与迭代最小二乘法水脂分离(iterative decomposition of water and fat with echo asymmetry and the least squares estimation quantification sequence,IDEAL-IQ)和体素内不相干运动(intravoxel incoherent motion,IVIM)在子宫内膜癌(endometrial carcinoma,EC)细胞增殖状态评估中的价值。方法:回顾并分析24例Ki-67增殖指数低(≤50%)和19例Ki-67增殖指数高(>50%)的EC患者的资料,分别测量病灶IDEAL-IQ成像的脂肪分数(fat fraction,FF)、R_(2)^(*)弛豫率(R_(2)^(*))值和IVIM成像的慢速表观弥散系数(slow apparent diffusion coefficient,ADCslow)、快速表观弥散系数(fast apparent diffusion coefficient,ADC-fast)和灌注分数(perfusion fraction,f)并进行对比。受试者工作特征(receiver operating characteristic,ROC)曲线的曲线下面积(area under curve,AUC)被用于确定各参数的诊断效能,logistic回归和DeLong检验分别被用于多参数联合诊断和不同AUC间的差异分析。Spearman相关被用于评估各参数值与Ki-67增殖指数的相关性。结果:Ki-67增殖指数高的组ADC-slow、ADC-fast和R_(2)^(*)值均显著低于Ki-67增殖指数低的组(P分别为<0.001、0.004、<0.001)。ADC-slow、ADC-fast、R_(2)^(*)以及三者联合鉴别Ki-67增殖指数高、低组EC的AUC分别为0.860、0.748、0.862和0.978。DeLong分析显示,ADC-slow+ADC-fast+R_(2)^(*)与ADC-slow、ADC-fast及R_(2)^(*)之间的AUC差异均有统计学意义(Z分别为2.109、3.134、2.227;P分别为0.035、0.002、0.023)。ADC-slow和R_(2)^(*)值均与Ki-67增殖指数呈中度负相关(r分别为-0.547、-0.711,P<0.001),ADC-fast与Ki-67增殖指数呈轻度负相关(r分别为-0.324,P=0.034)。结论:ADC-slow、ADC-fast和R_(2)^(*)均有助于评估EC患者的细胞增殖状态,且三者联合能够对Ki-67增殖指数高、低组EC进行更有效的鉴别。展开更多
Based on the theory of the complex variable functions, the analysis of non-axisymmetric thermal stresses in a finite matrix containing a circular inclusion with functionally graded interphase is presented by means of ...Based on the theory of the complex variable functions, the analysis of non-axisymmetric thermal stresses in a finite matrix containing a circular inclusion with functionally graded interphase is presented by means of the least square boundary collocation technique. The distribution of thermal stress for the functionally graded interphase layer with arbitrary radial material parameters is derived by using the method of piece-wise homogeneous layers when the finite matrix is subjected to uniform heat flow. The effects of matrix size, interphase thickness and compositional gradient on the interfacial thermal stress are discussed in detail. Numerical results show that the magnitude and distribution of interfacial thermal stress in the inclusion and matrix can be designed properly by controlling these parameters.展开更多
文摘目的:探索磁共振成像多点非对称回波采集与迭代最小二乘法水脂分离(iterative decomposition of water and fat with echo asymmetry and the least squares estimation quantification sequence,IDEAL-IQ)和体素内不相干运动(intravoxel incoherent motion,IVIM)在子宫内膜癌(endometrial carcinoma,EC)细胞增殖状态评估中的价值。方法:回顾并分析24例Ki-67增殖指数低(≤50%)和19例Ki-67增殖指数高(>50%)的EC患者的资料,分别测量病灶IDEAL-IQ成像的脂肪分数(fat fraction,FF)、R_(2)^(*)弛豫率(R_(2)^(*))值和IVIM成像的慢速表观弥散系数(slow apparent diffusion coefficient,ADCslow)、快速表观弥散系数(fast apparent diffusion coefficient,ADC-fast)和灌注分数(perfusion fraction,f)并进行对比。受试者工作特征(receiver operating characteristic,ROC)曲线的曲线下面积(area under curve,AUC)被用于确定各参数的诊断效能,logistic回归和DeLong检验分别被用于多参数联合诊断和不同AUC间的差异分析。Spearman相关被用于评估各参数值与Ki-67增殖指数的相关性。结果:Ki-67增殖指数高的组ADC-slow、ADC-fast和R_(2)^(*)值均显著低于Ki-67增殖指数低的组(P分别为<0.001、0.004、<0.001)。ADC-slow、ADC-fast、R_(2)^(*)以及三者联合鉴别Ki-67增殖指数高、低组EC的AUC分别为0.860、0.748、0.862和0.978。DeLong分析显示,ADC-slow+ADC-fast+R_(2)^(*)与ADC-slow、ADC-fast及R_(2)^(*)之间的AUC差异均有统计学意义(Z分别为2.109、3.134、2.227;P分别为0.035、0.002、0.023)。ADC-slow和R_(2)^(*)值均与Ki-67增殖指数呈中度负相关(r分别为-0.547、-0.711,P<0.001),ADC-fast与Ki-67增殖指数呈轻度负相关(r分别为-0.324,P=0.034)。结论:ADC-slow、ADC-fast和R_(2)^(*)均有助于评估EC患者的细胞增殖状态,且三者联合能够对Ki-67增殖指数高、低组EC进行更有效的鉴别。
基金supported by the National Natural Science Foundation of China(Grant No.11232007)the Funding for Outstanding Doctoral Dissertation in Nanjing University of Aeronautics and Astronautics(Grant No.BCXJ11-03)Funding of Jiangsu Innovation Program for Graduate Education(Grant No.CXZZ11_0191)
文摘Based on the theory of the complex variable functions, the analysis of non-axisymmetric thermal stresses in a finite matrix containing a circular inclusion with functionally graded interphase is presented by means of the least square boundary collocation technique. The distribution of thermal stress for the functionally graded interphase layer with arbitrary radial material parameters is derived by using the method of piece-wise homogeneous layers when the finite matrix is subjected to uniform heat flow. The effects of matrix size, interphase thickness and compositional gradient on the interfacial thermal stress are discussed in detail. Numerical results show that the magnitude and distribution of interfacial thermal stress in the inclusion and matrix can be designed properly by controlling these parameters.
