模糊关系的非循环性

通过讨论模糊关系的非循环性。研究内容包括一个模糊关系及其严格部分在一个t模T下的非循环性两部分。对模糊关系的非循环性,在T左连续下,借助α-截集和T-传递闭包,给出了T-非循环性的一些等价命题。在对模糊关系R的严格部分PR的非循环性的讨论中,主要给出了R的T-非循环性与PR的T-非循环性之间的关系以及PR的T-非循环性的一些等价命题。

正则选择函数的公理化特征

考察在Fuzzy偏爱关系下基于t-模的选择函数 ,当偏爱关系具有诸如强拟传递性、拟传递性、次非循环性等不同传递性时 ,分别讨论正则选择函数的公理化特征。

浅析应用多媒体教学的作用和意义

多媒体技术的广泛应用,带来了现代教育模式、内容、方法、理论等方面的变革,对教学过程产生了深远影响。特别是多媒体技术的多样性、交互性、非循环性和集成性,对现代教育产生了积极的作用和意义,拓展了学生获取知识的渠道,增强了学生学习的原动力,活化了学习过程,提升了学习效果。

关于模糊严格偏好关系的传递性

给定一个模糊关系 ,Ovchinnikov和 Roubens引进了非常一般的模糊严格偏好关系定义 ,本文将详细讨论该偏好关系的弱传递性 ,一致性 。

A nonlinear rheological damage model of hard rock

By adopting cyclic increment loading and unloading method, time-independent and time-dependent strains can be separated. It is more reasonable to describe the reversible and the irreversible deformations of sample separately during creep process. A nonlinear elastic-visco-plastic rheological model is presented to characterize the time-based deformational behavior of hard rock. Specifically, a spring element is used to describe reversible instantaneous elastic deformation. A reversible nonlinear visco-elastic （RNVE） model is developed to characterize recoverable visco-elastic response. A combined model, which contains a fractional derivative dashpot in series with another Hook’s body, and a St. Venant body in parallel with them, is proposed to describe irreversible visco-plastic deformation. Furthermore, a three-stage damage equation based on strain energy is developed in the visco-plastic portion and then nonlinear elastic-visco-plastic rheological damage model is established to explain the trimodal creep response of hard rock. Finally, the proposed model is validated by a laboratory triaxial rheological experiment. Comparing with theoretical and experimental results, this rheological damage model characterizes well the reversible and irreversible deformations of the sample, especially the tertiary creep behavior.

Nonsingularity on Level-2(r_1, r_2)-circulant Matrices of Type (m,n)

In this pape,we give four methods of discriminations its nonsingularity by utilizing only parametr r1,r2 and elements of the first row of level-2 (r1, r2)-circulant matrices of type (m,n).

Generation and Properties of Two-Mode Circular States

Two-mode circular states,which are superposition states from some two-mode coherent states,are studiedtheoretically.It is shown that under certain conditions two-mode circular states may exhibit nonclassical effects,suchas sub-Poissonian statistics and intermode correlation.We propose schemes to generate two-mode circular states by theinteraction of a trapped ion with traveling wave lasers.

Nonsingularity on Level-k (r_1, r_2,…, r_k)-circulant Matrices of Type (n_1, n_2,…, n_k)

In this paper,it is given that the new equivalent definition of level-k (r1,r2, …,rk)-cir culant matrices of type (n1,n2,…,nk) in [1] and we give the explicit expression of its the eigenval ues and four methods of discriminations its nonsingularity by utilizing only parameter r1,r2, …,rk and elements of the first row of the sorts matrices.

Absorption and Recurrence Spectra of Nonhydrogenic Rydberg Atom Near a Metal Surface

Multielectron to theoretical treatments atoms near a metal surface are essentially more complicated than hydrogen atom with regard By using the semicalssical dosed orbit theory generalized to the multielecton atoms, we study the dynamical properties of the Rydberg lithium atom near a metal surface. The photoabsorption spectra and recurrence spectra of this system have also been calculated. Considering the effect of the ionic core potential of the Rydberg lithium atom, the number of the closed orbits increases, which leads to more peaks in the recurrence spectra than the case of hydrogen atom near a metal surface. This result shows that the core-scattered effects play an important role in nonhydrogenic atoms. This study is a new application of the closed-orbit theory and is of potential experimental interest.

The Life Predictions in Whole Process Realized with Different Variables and Conventional Materials Constants for Elastic-Plastic Materials Behaviors under Unsymmetrical Cycle Loading

Author researches a lot of the mathematical models and the related conventional material constants in the traditional and the modem mechanics; to adopt two types of variables a and D, for the fatigue-damage-fracture behaviors to elastic-plastic steels contained flaws, to put forward several calculation models, which are the driving force and the life prediction expressions at each stage and in whole process; for the key parameters .A1 and ,A2 in two stages, there are functional relation with other conventional material constants σF,m1 and M2,λ2, they are defined as the new calculable comprehensive material constants, and indicate their physical and geometrical meanings. In addition, for conversion methods between two types of variables, relevant calculating example is provided. Thereby, make a linking between the fracture mechanics and the damage mechanics, communicating their relationships. This works for saving man powers and funds on fatigue-damage-fracture testing that will be having practical significance.

Performance analysis of a zeotropic mixture(R290/CO_2) for trans-critical power cycle

Low critical temperature limits the application of CO_2 trans-critical power cycle.The binary mixture of R290/CO_2has higher critical temperature.Using mixture fluid may solve the problem that subcritical CO_2 is hardly condensed by conventional cooling water.In this article,theoretical analysis is executed to study the performance of the zeotropic mixture for trans-critical power cycle using low-grade liquid heat source with temperature of200℃.The results indicated that the problem that CO_2 can't be condensed in power cycle by conventional cooling water can be solved by mixing R290 to CO_2.Variation trend of outlet temperature of thermal oil in supercritical heater with heating pressure is determined by the composition of the mixture fluid.Gliding temperature causes the maximum outlet temperature of cooling water with the increase of mass fraction of R290.There are the maximum values for cycle thermal efficiency and net power output with the increase of supercritical heating pressure.

Material Parameters of a Structural Steel with Plastic Strain Memory

The present work is concerned with the characterization of hardening parameters for an elasto-plastic continuum model, taking into account the memory effect of plastic strain amplitude, in order to predict the hysteretic responses of a ferritic steel. This elasto-plastic three-dimensional model is based on the internal thermodynamic variables which composed of the nonlinear kinematic hardening and isotropic hardening with the plastic strain memorization. The emphasis is put on the determination of strain memory parameters along with other material parameters of the proposed model in order to better simulate the behavior of the material at different strain range. The material parameters are calibrated with the experimental stabilized loops of stress-strain curves available in the literature. The predicted stabilized loops from the simulation with the determined parameters show good agreement with the experimental results signifying the validity of the considered model.

High Cycle Fatigue Life Prediction and Reliability Analysis of Aeroengine Blades

Based on the nonlinear continuum damage model （CDM） developed by Chaboehe, a modified model for high cycle fatigue of TC4 alloy was proposed. Unsymmetrical cycle fatigue tests were conducted on rod specimens at room temperature. Then the material parameters needed in the CDM were obtained by the fatigue tests, and the stress distribution of the specimen was calculated by FE method. Compared with the linear damage model （LDM）, the dam- age results and the life prediction of the CDM show a better agreement with the test and they are more precise than the LDM. By applying the CDM developed in this study to the life prediction of aeroengine blades, it is concluded that the root is the most dangerous region of the whole blade and the shortest life is 58 211 cycles. Finally, the Cox propor- tional hazard model of survival analysis was applied to the analysis of the fatigue reliability. The Cox model takes the covariates into consideration, which include diameter, weight, mean stress and tensile strength. The result shows that the mean stress is the only factor that accelerates the fracture process.

ON A KIND OF GENERALIZED QUASI-VARIATIONAL INEQUALITIES AND FAN's MINIMAX INEQUALITY WITHOUT CONVEXITY

This Paper gives a Fan’s type minimax theorem, a nearest point theorem and two existence theorems of solutions for a kind of generalized quasi-variational inequalities in H-spaces without any linear structure.

Resourceability on nuclear fuel cycle by transmutation approach

A resourceability on nuclear fuel cycle by transmutation of fission products in the spent fuel of nuclear reactors is discussed in this paper to investigate the feasibility of ＂creation and utilization＂ of Apr6s ORIENT from Adv.-ORIENT cycle, in which chemical ＂separation and utilization＂ of nuclear rare metals （platinum group metals, Mo, Tc, rare earth, etc.） has been proposed since FY2006. Apr6s ORIENT research program was newly initiated in FY2011 for nuclear transmutation of fission products into stable or short-lived highly-valuable elements. In the resourceability of rare earth metals from fission products, non-radioactive Nd and Dy can be created from Pr and Tb, respectively, by transmutation. Especially, the Dy creation has relatively high feasibility of about 10-20 %/y in creation rate. A proper moderation of neutrons in blanket of fast reactors may be required to provide a high creation rate of La from Ba. In light platinum group metals, non-radioactive Ru can be created from Tc by transmutation, of which creation rate is about 4-5 %/y in blanket of fast reactors. Pd created from Rh is almost non-radioactively depending on the isotope fraction of 107pd. Rh creation from Ru is not feasible under the neutron irradiation of typical nuclear reactors.

Investigation on Inlet Recirculation Characteristics of Double Suction Centrifugal Compressor with Unsymmetrical Inlet

The inlet recirculation characteristics of double suction centrifugal compressor with unsymmetrical inlet structures were studied in numerical method,mainly focused on three issues including the amounts and differences of the inlet recirculation in different working conditions,the circumferential non-uniform distributions of the inlet recirculation,the recirculation velocity distributions of the upstream slot of the rear impeller.The results show that there are some differences between the recirculation of the front impeller and that of the rear impeller in whole working conditions..In design speed,the recirculation flow rate of the rear impeller is larger than that of the front impeller in the large flow range,but in the small flow range,the recirculation flow rate of the rear impeller is smaller than that of the front impeller.In different working conditions,the recirculation velocity distributions of the front and rear impeller are non-uniform along the circumferential direction and their non-uniform extents are quite different.The circumferential non-uniform extent of the recirculation velocity varies with the working conditions change.The circumferential non-uniform extent of the recirculation velocity of front impeller and its distribution are determined by the static pressure distribution of the front impeller,but that of the rear impeller is decided by the coupling effects of the inlet flow distortion of the rear impeller,the circumferential unsymmetrical distribution of the upstream slot and the asymmetric structure of the volute.In the design flow and small flow conditions,the recirculation velocities at different circumferential positions of the mean line of the upstream slot cross-section of the rear impeller are quite different,and the recirculation velocities distribution forms at both sides of the mean line are different.The recirculation velocity distributions in the cross-section of the upstream slot depend on the static pressure distributions in the intake duct.