PLZT光致伸缩层合梁的非接触形状控制

以光电层合梁非接触形状控制问题为研究对象,阐述了PLZT光致伸缩驱动器的工作机理,建立了光-电-力-热耦合情况下的光电有限元模型,通过引入加强假定应变模式和假定自然应变法改善了单元的性能。在此基础上,以光致伸缩驱动器所受到的光强大小为设计变量,以光电层合梁的期望形状与控制形状的差值函数为目标函数,应用有限元法和遗传算法建立了求解基于PLZT光致伸缩驱动器层合梁非接触形状控制问题的一般方法。数值模拟的结果验证了该方法有效,表明该方法能够很好地实现光电层合梁结构的非接触形状控制。

基于递阶遗传算法的结构非接触形状控制

以PLZT光致伸缩层合梁非接触形状控制问题为研究对象,提出了一种结合结构拓扑优化与递阶遗传算法的控制方法.该方法以PLZT光致伸缩驱动器的拓扑分布和照射的光强值为设计变量,以PLZT光致伸缩层合梁的期望形状与控制形状的差值函数为适应度函数,应用结构拓扑优化、递阶遗传算法和有限元法,优化了PLZT光致伸缩驱动器的分布和所照射的光强值.与基于传统遗传算法的形状控制方法的计算结果进行了对比分析,该方法的进化速度提高了91%以上,所控制的结构形状与期望形状的误差较传统遗传算法降低了76%以上.

Design of a new bionic diamond bit and its experimental study

Bionics was applied in the design of the impregnated diamond bit. Based on previous resehrch and the 63# bit matrix formula, a new non-smooth bionic impregnated diamond bit with a single circular ring was designed and manufactured, and also tested indoor. The results were satisfactory. During its shape contacted surface system, non-smooth shape display some structure merits such as decreasing resistance. It was obvious that the drilling efficiency of the bionics bit is much higher than that of ordinary＇s one, and so does the working life of bionic bit.