期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
低碳盘条弯断原因分析及控制 被引量:1
1
作者 孙坤 龙海山 《南方金属》 CAS 2021年第2期32-35,共4页
阳春新钢铁生产不同规格的低碳低硅盘条,在酸洗拉拔折弯时出现部分产品弯断。文章以不同规格弯断样为研究对象,通过断口晶粒度均匀性以及高倍电镜下的显微断口状态分析,找出弯断原因。结果表明:弯断样主要存在的问题为断口晶粒均匀性存... 阳春新钢铁生产不同规格的低碳低硅盘条,在酸洗拉拔折弯时出现部分产品弯断。文章以不同规格弯断样为研究对象,通过断口晶粒度均匀性以及高倍电镜下的显微断口状态分析,找出弯断原因。结果表明:弯断样主要存在的问题为断口晶粒均匀性存在大小晶粒差异;断口面存在外来夹杂物;断口韧窝有颗粒状非金属氧化夹杂物。根据缺陷类型提出了相应的优化控制措施。 展开更多
关键词 弯断 晶粒度 非金属氧化夹杂物 外来夹杂
下载PDF
Influence of GdCl_3 addition on purifying effectiveness and properties of Mg-10Gd-3Y-0.5Zr alloy 被引量:1
2
作者 吴国华 王玮 +2 位作者 孙明 王渠东 丁文江 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2010年第7期1177-1183,共7页
In order to improve the purifying efficiency of RJ6 flux,5%(mass fraction) GdCl3 was introduced into the flux for refining Mg-10Gd-3Y-0.5Zr(GW103K) alloy.The results show that the RJ6 flux containing 5%GdCl3 exhibits ... In order to improve the purifying efficiency of RJ6 flux,5%(mass fraction) GdCl3 was introduced into the flux for refining Mg-10Gd-3Y-0.5Zr(GW103K) alloy.The results show that the RJ6 flux containing 5%GdCl3 exhibits better adsorption ability to nonmetallic inclusions than the one without GdCl3.Moreover,the mechanical,corrosion properties and fluidity of the alloy refined with RJ6 flux and RJ6 flux containing 5%GdCl3 were investigated,respectively.It is found that these properties are improved to a certain degree due to the removal of nonmetallic inclusions in the alloy.Thermodynamic analysis and surface tension experiments indicate that the main reason can be ascribed to the decrease of the surface tension of the flux with 5%GdCl3,which promotes the combination of flux and nonmetallic inclusions. 展开更多
关键词 magnesium alloy rare earth element nonmetallic inclusions REFINING CORROSION fluidity magnesium alloy rare earth element nonmetallic inclusions REFINING CORROSION FLUIDITY
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部