Rankine theory and Coulomb theory are not suitable for the calculation of wall pressure by bulk materials, so this paper studies the actual distribution and calculation methods for the wall pressure in squat silos. Ba...Rankine theory and Coulomb theory are not suitable for the calculation of wall pressure by bulk materials, so this paper studies the actual distribution and calculation methods for the wall pressure in squat silos. Based on the limits equilibrium theory, the force on unit width of wall exerted by bulk materials is obtained, and the distribution of wall pressure is obtained by accurate mathematical deduction. It is proved that the results are in good agreement with those of the full-sized silo experiment, whether the top of the stored bulk materials is a horizontal plane or a conical pile.展开更多
A mechanical model of the quasi-static interface of a mode I crack between a rigid and a pressure-sensitive viscoelastic material was established to investigate the mechanical characteristic of ship-building engineeri...A mechanical model of the quasi-static interface of a mode I crack between a rigid and a pressure-sensitive viscoelastic material was established to investigate the mechanical characteristic of ship-building engineering hi-materials. In the stable growth stage, stress and strain have the same singularity, ie （σ, ε） ∝ r^-1/（n-1）. The variable-separable asymptotic solutions of stress and strain at the crack tip were obtained by adopting Airy＇s stress function and the numerical results of stress and strain in the crack-tip field were obtained by the shooting method. The results showed that the near-tip fields are mainly governed by the power-hardening exponent n and the Poisson ratio v of the pressure-sensitive material. The fracture criterion of mode I quasi-static crack growth in pressure-sensitive materials, according to the asymptotic analyses of the crack-tip field, can be viewed from the perspective of strain.展开更多
The plane crack problem of an orthotropic functionally graded strip under concentrated loads is studied. The edge crack is perpendicular to the boundary and the elastic property of the material is assumed to vary depe...The plane crack problem of an orthotropic functionally graded strip under concentrated loads is studied. The edge crack is perpendicular to the boundary and the elastic property of the material is assumed to vary depending on thickness. By using an integral transform method, the present problem can be reduced to a single integral equation which is solved numerically. The influences of parameters such as the nonhomogeneity constant and the geometry parameters on the stress intensity factors (SIFs) are studied. It is found that the nonhomogeneity constant has important influences on the SIFs.展开更多
In this paper,we analyze the stress and electric field intensity factors affected by residual surface stress for conducting cracks in piezoelectric nanomaterials.The problem is reduced to a system of non-linear singul...In this paper,we analyze the stress and electric field intensity factors affected by residual surface stress for conducting cracks in piezoelectric nanomaterials.The problem is reduced to a system of non-linear singular integral equations,whose solution is determined by iteration technique.Numerical results indicate that the residual surface stress can significantly alter the crack tip fields at nanometer length scales.Due to the residual surface stress,281he electric field can produce stress around crack tip.This suggests a strong electromechanical coupling crack tip field for nanoscale piezoelectric materials.Such a finding is considerably different from the classical fracture mechanics results.A transit electric field to stress load ratio is identified,for which influences of residual surface stresses vanish.The research is useful for the applications of nanoscale piezoelectric devices.展开更多
The purpose of this study is the development of latent heat transport system by using the mixture of the minute latent heat storage materials and the saccharine solution as medium. The experimental studies are carried...The purpose of this study is the development of latent heat transport system by using the mixture of the minute latent heat storage materials and the saccharine solution as medium. The experimental studies are carried out by the evaluation of viscosity and pressure loss in a pipe. Polyethylene (P.E.) is selected as the dispersed minute material that has closeness density (920kg/m3) of ice (917kg/m3). D-sorbitol and D-xylose solutions are picked as continuum phase of the test mixture. The concentration of D-sorbitol solution is set 48mass% from measured results of saturation solubility and the melting point. 40mass% solution of D-xylose is selected as the other test continuum phase. The non-ion surfactant, EA157 Dai-ichiseiyaku CO. Ltd, is used in order to prevent of dispersed P.E. powder cohere. The pressure loss of test mixture is measured by the straight circular pipe that has smooth inner surface. The measuring length for pressure loss is 1000 mm, and the inner diameter of pipe is 15mm. The accuracy of experiment apparatus for measuring pressure loss is within ±5%. The pressure loss data is estimated by the relationship between the heat transport ratio and the required pump power. It is clarified that the optimum range of mixing ratio exists over 10mass% of latent heat storage material.展开更多
文摘Rankine theory and Coulomb theory are not suitable for the calculation of wall pressure by bulk materials, so this paper studies the actual distribution and calculation methods for the wall pressure in squat silos. Based on the limits equilibrium theory, the force on unit width of wall exerted by bulk materials is obtained, and the distribution of wall pressure is obtained by accurate mathematical deduction. It is proved that the results are in good agreement with those of the full-sized silo experiment, whether the top of the stored bulk materials is a horizontal plane or a conical pile.
基金Supported by Heilongjiang Province Foundation under Grant No.LC08C02
文摘A mechanical model of the quasi-static interface of a mode I crack between a rigid and a pressure-sensitive viscoelastic material was established to investigate the mechanical characteristic of ship-building engineering hi-materials. In the stable growth stage, stress and strain have the same singularity, ie （σ, ε） ∝ r^-1/（n-1）. The variable-separable asymptotic solutions of stress and strain at the crack tip were obtained by adopting Airy＇s stress function and the numerical results of stress and strain in the crack-tip field were obtained by the shooting method. The results showed that the near-tip fields are mainly governed by the power-hardening exponent n and the Poisson ratio v of the pressure-sensitive material. The fracture criterion of mode I quasi-static crack growth in pressure-sensitive materials, according to the asymptotic analyses of the crack-tip field, can be viewed from the perspective of strain.
文摘The plane crack problem of an orthotropic functionally graded strip under concentrated loads is studied. The edge crack is perpendicular to the boundary and the elastic property of the material is assumed to vary depending on thickness. By using an integral transform method, the present problem can be reduced to a single integral equation which is solved numerically. The influences of parameters such as the nonhomogeneity constant and the geometry parameters on the stress intensity factors (SIFs) are studied. It is found that the nonhomogeneity constant has important influences on the SIFs.
基金supported by the National Natural Science Foundation of China(Grant Nos.11172081 and 11372086)Shenzhen Research Innovation Fund,China(Grant No.JCYJ20120613150312764)
文摘In this paper,we analyze the stress and electric field intensity factors affected by residual surface stress for conducting cracks in piezoelectric nanomaterials.The problem is reduced to a system of non-linear singular integral equations,whose solution is determined by iteration technique.Numerical results indicate that the residual surface stress can significantly alter the crack tip fields at nanometer length scales.Due to the residual surface stress,281he electric field can produce stress around crack tip.This suggests a strong electromechanical coupling crack tip field for nanoscale piezoelectric materials.Such a finding is considerably different from the classical fracture mechanics results.A transit electric field to stress load ratio is identified,for which influences of residual surface stresses vanish.The research is useful for the applications of nanoscale piezoelectric devices.
基金supported by an Environment-Science-Aid 2005-2007 from Tottori prefecture, Japan
文摘The purpose of this study is the development of latent heat transport system by using the mixture of the minute latent heat storage materials and the saccharine solution as medium. The experimental studies are carried out by the evaluation of viscosity and pressure loss in a pipe. Polyethylene (P.E.) is selected as the dispersed minute material that has closeness density (920kg/m3) of ice (917kg/m3). D-sorbitol and D-xylose solutions are picked as continuum phase of the test mixture. The concentration of D-sorbitol solution is set 48mass% from measured results of saturation solubility and the melting point. 40mass% solution of D-xylose is selected as the other test continuum phase. The non-ion surfactant, EA157 Dai-ichiseiyaku CO. Ltd, is used in order to prevent of dispersed P.E. powder cohere. The pressure loss of test mixture is measured by the straight circular pipe that has smooth inner surface. The measuring length for pressure loss is 1000 mm, and the inner diameter of pipe is 15mm. The accuracy of experiment apparatus for measuring pressure loss is within ±5%. The pressure loss data is estimated by the relationship between the heat transport ratio and the required pump power. It is clarified that the optimum range of mixing ratio exists over 10mass% of latent heat storage material.
