35% SiCp/2024 Al（volume fraction） composite was prepared by powder metallurgy method. The microstructures of Si Cp/Al interfaces and precipitate phase/Al interfaces were characterized by HRTEM, and the interface con...35% SiCp/2024 Al（volume fraction） composite was prepared by powder metallurgy method. The microstructures of Si Cp/Al interfaces and precipitate phase/Al interfaces were characterized by HRTEM, and the interface conditions were evaluated by tensile modules of elasticity and Brinell hardness measurement. The results show that the overall Si Cp/Al interface condition in this experiment is good and three kinds of Si Cp/Al interfaces are present in the composites, which include vast majority of clean planer interfaces, few slight reaction interfaces and tiny amorphous interfaces. The combination mechanism of Si C and Al in the clean planer interface is the formation of a semi-coherent interface by closely matching of atoms and there are no fixed or preferential crystallographic orientation relationships between Si C and Al. MgAl2O4 spinel particles act as an intermediate to form semi-coherent interface with SiC and Al respectively at the slight reaction interfaces. When the composite is aged at 190 °C for 9 h after being solution-treated at 510 °C for 2 h, numerous discoid-shaped and needle-shaped nanosized precipitates dispersively exist in the composite and are semi-coherent of low mismatch with Al matrix. The Brinell hardness of composites arrives peak value at this time.展开更多
Abstract： In this work, the authors present a study of growth and characterization of composite based on AI and CNT （carbon nanotubes. The composites were prepared by a chemical mixing method and characterized by SE...Abstract： In this work, the authors present a study of growth and characterization of composite based on AI and CNT （carbon nanotubes. The composites were prepared by a chemical mixing method and characterized by SEM analysis, energy dispersed X-ray measurements, X-ray photoelectron spectroscopy and cathodoluminescence spectroscopy. The analysis showed that the composites are formed by macro-cluster of aluminum oxide on a network of CNT without formation of chemical bonds at interface between particles. The results are compared with those obtained for a sample of CNT with AI traces （〈 0.5%）. They show that only the presence of metal traces changes the nanotubes optical properties, with a luminescence signal centered at about 380 nm. These luminescence signals are caused by the adhesion between CNT and AI micro-clusters that promote the formation of band gap with some local energy levels.展开更多
基金Project(51371077)supported by the National Natural Science Foundation of China
文摘35% SiCp/2024 Al（volume fraction） composite was prepared by powder metallurgy method. The microstructures of Si Cp/Al interfaces and precipitate phase/Al interfaces were characterized by HRTEM, and the interface conditions were evaluated by tensile modules of elasticity and Brinell hardness measurement. The results show that the overall Si Cp/Al interface condition in this experiment is good and three kinds of Si Cp/Al interfaces are present in the composites, which include vast majority of clean planer interfaces, few slight reaction interfaces and tiny amorphous interfaces. The combination mechanism of Si C and Al in the clean planer interface is the formation of a semi-coherent interface by closely matching of atoms and there are no fixed or preferential crystallographic orientation relationships between Si C and Al. MgAl2O4 spinel particles act as an intermediate to form semi-coherent interface with SiC and Al respectively at the slight reaction interfaces. When the composite is aged at 190 °C for 9 h after being solution-treated at 510 °C for 2 h, numerous discoid-shaped and needle-shaped nanosized precipitates dispersively exist in the composite and are semi-coherent of low mismatch with Al matrix. The Brinell hardness of composites arrives peak value at this time.
文摘Abstract： In this work, the authors present a study of growth and characterization of composite based on AI and CNT （carbon nanotubes. The composites were prepared by a chemical mixing method and characterized by SEM analysis, energy dispersed X-ray measurements, X-ray photoelectron spectroscopy and cathodoluminescence spectroscopy. The analysis showed that the composites are formed by macro-cluster of aluminum oxide on a network of CNT without formation of chemical bonds at interface between particles. The results are compared with those obtained for a sample of CNT with AI traces （〈 0.5%）. They show that only the presence of metal traces changes the nanotubes optical properties, with a luminescence signal centered at about 380 nm. These luminescence signals are caused by the adhesion between CNT and AI micro-clusters that promote the formation of band gap with some local energy levels.
