A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied...A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied through orthogonal experimental methods. The factors studied were rotation speed, modifier dosage, emulsification temperature, emulsification time and heat aging time after emulsification. Optimized conditions for modification of the surface were： rotation speed 16000 r/min; modifier dosage 3%; emulsification temperature 75 ℃; emulsification time 60 min and aging time 40 min. The modified nano-CaCO3 was also studied by size-distribution measurements, transmission electron microscopy, infrared spectroscopy and thermal analysis. The results show that the size distribution of the modified nano-CaCO3 is uniform and that there are chemi-sorption and physi-sorption between the nano-CaCO3 and the modifier. Compared to traditional architectural coatings without nano-CaCO3, the nanometer composite coatings are obviously improved in respect to dirt resistance, scrub resistance, thixotropy, water resistance, alkalinity resistance and aging resistance.展开更多
This paper discusses the validity of (adaptive) Lagrange generalized plain finite element method (FEM) and plate element method for accurate analysis of acoustic waves in multi-layered piezoelectric structures with ti...This paper discusses the validity of (adaptive) Lagrange generalized plain finite element method (FEM) and plate element method for accurate analysis of acoustic waves in multi-layered piezoelectric structures with tiny interfaces between metal electrodes and surface mounted piezoelectric substrates. We have come to conclusion that the quantitative relationships between the acoustic and electric fields in a piezoelectric structure can be accurately determined through the proposed finite element methods. The higher-order Lagrange FEM proposed for dynamic piezoelectric computation is proved to be very accurate (prescribed relative error 0.02% - 0.04% ) and a great improvement in convergence accuracy over the higher order Mindlin plate element method for piezoelectric structural analysis due to the assumptions and corrections in the plate theories.The converged lagrange finite element methods are compared with the plate element methods and the computedresults are in good agreement with available exact and experimental data. The adaptive Lagrange finite elementmethods and a new FEA computer program developed for macro- and micro-scale analyses are reviewed, and recently extended with great potential to high-precision nano-scale analysis in this paper and the similarities between piezoelectric and seismic wave propagations in layered structures and plates are stressed.展开更多
A convective assembly technique at the micron scale analogous to the writing action of a ＂pipette pen＂ has been developed for the linear assembly of gold nanoparticle strips with micron scale width and millimeter sc...A convective assembly technique at the micron scale analogous to the writing action of a ＂pipette pen＂ has been developed for the linear assembly of gold nanoparticle strips with micron scale width and millimeter scale length for surface enhanced Raman scattering （SERS）. The arrays with interparticle gaps smaller than 3 nm are hexagonally stacked in the vicinity of the pipette tip. Variable numbers of stacked layers and clean surfaces of the assembled nanoparticles are obtained by optimizing the velocity of the pipette tip. The SERS properties of tile assembled nanoparticle arrays rely on their stacking number and surface cleanliness.展开更多
In many engineering applications,heat transfer enhancement techniques are of vital importance in order to ensure reliable thermal designs of convective heat transfer applications.This study examines experimentally the...In many engineering applications,heat transfer enhancement techniques are of vital importance in order to ensure reliable thermal designs of convective heat transfer applications.This study examines experimentally the heat transfer characteristics on the base plate around various surface mounted obstacles.Local convection coefficients are evaluated in the vicinity of each individual protruding body with great spatial resolution using the transient liquid crystal technique.Five different obstacles of constant height-to-hydraulic diameter ratio(~1.3) are considered.These include:a cylinder,a square,a triangle,a diamond and a vortex generator of delta wing shape design.The experiments were carried out over a range of freestream Reynolds numbers,based on the hydraulic diameter of each obstacle,varying from 4,000 to 13,000.The results indicate a negligible effect of the flow speed on the heat transfer topological structure and a considerable effect of the obstacle geometry on the level and distribution of heat transfer enhancement.展开更多
文摘A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied through orthogonal experimental methods. The factors studied were rotation speed, modifier dosage, emulsification temperature, emulsification time and heat aging time after emulsification. Optimized conditions for modification of the surface were： rotation speed 16000 r/min; modifier dosage 3%; emulsification temperature 75 ℃; emulsification time 60 min and aging time 40 min. The modified nano-CaCO3 was also studied by size-distribution measurements, transmission electron microscopy, infrared spectroscopy and thermal analysis. The results show that the size distribution of the modified nano-CaCO3 is uniform and that there are chemi-sorption and physi-sorption between the nano-CaCO3 and the modifier. Compared to traditional architectural coatings without nano-CaCO3, the nanometer composite coatings are obviously improved in respect to dirt resistance, scrub resistance, thixotropy, water resistance, alkalinity resistance and aging resistance.
文摘This paper discusses the validity of (adaptive) Lagrange generalized plain finite element method (FEM) and plate element method for accurate analysis of acoustic waves in multi-layered piezoelectric structures with tiny interfaces between metal electrodes and surface mounted piezoelectric substrates. We have come to conclusion that the quantitative relationships between the acoustic and electric fields in a piezoelectric structure can be accurately determined through the proposed finite element methods. The higher-order Lagrange FEM proposed for dynamic piezoelectric computation is proved to be very accurate (prescribed relative error 0.02% - 0.04% ) and a great improvement in convergence accuracy over the higher order Mindlin plate element method for piezoelectric structural analysis due to the assumptions and corrections in the plate theories.The converged lagrange finite element methods are compared with the plate element methods and the computedresults are in good agreement with available exact and experimental data. The adaptive Lagrange finite elementmethods and a new FEA computer program developed for macro- and micro-scale analyses are reviewed, and recently extended with great potential to high-precision nano-scale analysis in this paper and the similarities between piezoelectric and seismic wave propagations in layered structures and plates are stressed.
文摘A convective assembly technique at the micron scale analogous to the writing action of a ＂pipette pen＂ has been developed for the linear assembly of gold nanoparticle strips with micron scale width and millimeter scale length for surface enhanced Raman scattering （SERS）. The arrays with interparticle gaps smaller than 3 nm are hexagonally stacked in the vicinity of the pipette tip. Variable numbers of stacked layers and clean surfaces of the assembled nanoparticles are obtained by optimizing the velocity of the pipette tip. The SERS properties of tile assembled nanoparticle arrays rely on their stacking number and surface cleanliness.
文摘In many engineering applications,heat transfer enhancement techniques are of vital importance in order to ensure reliable thermal designs of convective heat transfer applications.This study examines experimentally the heat transfer characteristics on the base plate around various surface mounted obstacles.Local convection coefficients are evaluated in the vicinity of each individual protruding body with great spatial resolution using the transient liquid crystal technique.Five different obstacles of constant height-to-hydraulic diameter ratio(~1.3) are considered.These include:a cylinder,a square,a triangle,a diamond and a vortex generator of delta wing shape design.The experiments were carried out over a range of freestream Reynolds numbers,based on the hydraulic diameter of each obstacle,varying from 4,000 to 13,000.The results indicate a negligible effect of the flow speed on the heat transfer topological structure and a considerable effect of the obstacle geometry on the level and distribution of heat transfer enhancement.
