A series of hyperbranched poly(amine-ester)polyols were synthesized by the polycondensation of N,N-diethylol-3-amine-methylpropionate(prepared by Michael addition reaction of methyl acrylate with diethanolamine)as an ...A series of hyperbranched poly(amine-ester)polyols were synthesized by the polycondensation of N,N-diethylol-3-amine-methylpropionate(prepared by Michael addition reaction of methyl acrylate with diethanolamine)as an AB2-type monomer with trimethylol propane as the core moiety,proceeding in one-step procedure in the melt with p-toluenesulfonic acid as catalyst.The obtained monomer and polymers were characterized by FTIR and 1H-NMR spectroscopy.The solubility and surface activity in aqueous solution of the polymers were also examined.The gas permeability,water vapor permeability,and moisture absorption of microfiber synthetic leather treated by hyperbranched polymer were studied.The optimum conditions were that the dosage of dye and hyperbranched polymer was 5% and 10%,respectively.The water vapor permeability and moisture absorption of microfiber synthetic leather reached to 0.525 4 mg/(10 cm2·24 h)and 0.046 7 mg/(10 cm2·24 h).Compared with blank samples,they increased by 15% and 35%,respectively.However,the dosage of hyperbranched polymer has little influence on gas permeability of microfiber synthetic leather.SEM results show that the fiber of microfiber synthetic leather treated by hyperbranched polymer is incompact.展开更多
Traditional chrome tanning technology is still widely used today. In this technology, chrome shaving as well as chrome contained effluent in tanning and retanning processes is a big issue in the industry. Wet white ta...Traditional chrome tanning technology is still widely used today. In this technology, chrome shaving as well as chrome contained effluent in tanning and retanning processes is a big issue in the industry. Wet white tanning technology has been gaining in importance in recent years, but in general, the comprehensive performance of chrome-free tanned leather is not comparable with that of chrome tanned leather. In the present work, chrome-free tanning and chrome tanning are combined in a reversed procedure, which produces leather with chrome tanned leather quality without chrome tanned leather waste problems. In this procedure, a special amphoteric organic compound, no pickle, no salt chrome-free tanning agent TWT was used to tan delimed hides （no pickle） making wet white with shrinking temperature at 80-85 ~C. Then, new method called reversed tanning further process the wet white into chrome-tanned crust. In this reversed method, retanning, fatliquoring and coloring processes were carried out before chrome tanning. This technology eliminates chrome waste issue in tanning, shaving, post tanning processes. The chrome contained effluent is only concentrated in the last chrome tanning process. The leather made with this technology has complete conventional chrome-tanned leather quality. In this way, chrome leather quality without chrome waste problems was achieved. So, it is a new clean tanning technology.展开更多
This study is aimed at determining the level of environmental degradation as well as the concentration of trace elements in soil and stream sediments in order to evaluate the environmental impact of the mining operati...This study is aimed at determining the level of environmental degradation as well as the concentration of trace elements in soil and stream sediments in order to evaluate the environmental impact of the mining operation.Twenty-five(25) soils and ten(10) stream sediment samples were collected from the study area. The physicochemical parameters were determined using appropriate instrumentation with the aid of a digital p H meter(Milwaukee meter) to measure the p H and electrical conductivity, total dissolved solids, moisture content and loss on ignition of the soil and stream sediment samples. The p H of the soil sample ranged from(6.10 to 7.19); Electrical conductivity ranged from(21.3 to 279.4 μS/cm), moisture content varied from(0.60% to 7.20%), and the LOI ranged from(2.03% to 18.62%). The results of the analysis showed that the concentrations of the trace elements in the soils and stream sediment samples were slightly higher than the background values. Plots of the trace elements in stream sediment samples show moderate, consistent decrease downstream except at points where there was mine water discharge into the main river. The pollution levels of heavy metals were examined in stream sediment and soil samples using different assessable indices, such as the enrichment factor, which showed significant-moderate enrichment for Cr, Th, Nb, Zn, Pb, Y and Zr and the geoaccumulation index, which showed practically moderate contamination with Cr, Ni and Sr based on regional background reference values. Geo-accumulation index and contamination index for soils and stream sediment revealed uncontaminated to moderate contamination. Likewise,elements with moderate contamination were Cr, Ni and Sr.The Pearson correlation showed that there were significant positive associations among selected metals in soil and stream sediment samples.展开更多
A promising direction in the tanning industry is the use of natural minerals as environmentally friendly technologically efficient materials that are able to adjust and regulate the efficiency of formation of the derm...A promising direction in the tanning industry is the use of natural minerals as environmentally friendly technologically efficient materials that are able to adjust and regulate the efficiency of formation of the dermis structure and the properties of finished leather. The use of finely-dispersed minerals promotes alignment of topographic areas in thickness, increases the yield of leather on the area by avoiding bonding structural elements of the dermis. Changes in the microstructure of the dermis, as a result of mineral filling, contribute to improvement of performance and hygienic properties of finished leather. And the study of the properties of the specified skins should be consistent with the features of operations on their cutting, shoe molding and shoe upper fixing preparations. The most important properties of leather materials, which largely determine the quality of basic technological operations of shoe manufacturing are the deformation properties. Lack of information about relaxation and deformation properties of the leather produced by the new technologies do not allow to predict their ability to form shapes and save it--indicates the relevance of this study. This paper analyzes relaxation and deformation characteristics of natural leather for shoe uppers, filled with natural minerals montmorillonite and zeolite, and the ability to predict their formation and preservation of shape in service. Features of deformation of the skin with mineral content were assessed by determining single-cycle characteristics when attaching to a complete test cycle ＂loading-unloading-rest＂ sample. Correlations of elastic and plastic （permanent） deformation have been established, kinetics of changes in linear characteristics of the samples after removal of the load has been investigated. Introduction of dispersions of mineral to the structure of the dermis contributes to the strength of semi-finished leather, increase of the uniformity of mechanical properties in the longitudinal and transverse directions and rise of shape stability index. It is shown that the direction of this study allows us to offer new competitive ecologically friendly materials to produce shoes.展开更多
The nesting problem in the leather manufacturing is the problem of placing a set of irregularly shaped pieces (called stencils) on a set of irregularly shaped surfaces (called leathers sheets). This paper presents a n...The nesting problem in the leather manufacturing is the problem of placing a set of irregularly shaped pieces (called stencils) on a set of irregularly shaped surfaces (called leathers sheets). This paper presents a novel and promising processing approach. After the profile of leather sheets and stencils is obtained with digitizer, the discretization makes the processing independent of the specific geometrical information. The constraints of profile are regarded thoroughly. A heuristic bottom-left placement strategy is employed to sequentially locate stencils on sheets. The optimal placement sequence and rotation are deterimined by genetic algorithms (GA). A natural concise encoding method is developed to satisfy all the possible requirements of the leather nesting problem. The experimental results show that the proposed algorithm can not only be applied to the normal two-dimensional nesting problem, but also especially suitable for the placement of multiple two-dimensional irregular stencils on multiple two-dimensional irregular sheets.展开更多
Leather industry is an important light industry in China.Leather making requires a series of chemical treatment.Degreasing,unhairing and chrome tanning wastewaters are the main portions of tannery wastewater.Reclaimin...Leather industry is an important light industry in China.Leather making requires a series of chemical treatment.Degreasing,unhairing and chrome tanning wastewaters are the main portions of tannery wastewater.Reclaiming and reusing these wastewaters can eliminate 80% of COD,75% of BOD,95% of chromium and 93% of sulfuret,furthermore reduce environment impact,decrease treatment costs,save chemicals and water.Some application methods of wastewater reclamation and reuse for different operations were reported.The suitable reclamation and reuse technologies can enable leather making processes more rational,and realize the recovery and recycle of several chemicals in the tannery.Resourceful utilization of tannery wastewater should mate with renovating production technology,updating equipment,and must be guaranteed sufficiently by environmental protection measures.展开更多
Focusing on the economic development of its leather industry,Xinji City in the center ofHebei Province adheres to the scientific concept of development,strives to explore new ideas for industrialdevelopment,and makes ...Focusing on the economic development of its leather industry,Xinji City in the center ofHebei Province adheres to the scientific concept of development,strives to explore new ideas for industrialdevelopment,and makes tireless efforts to implement the GB/T19000 Quality Managementand Quality Assurance.This deepens the standardization of the leather industry and improves thelevel of enterprise management,serving both the economy and the enterprises.展开更多
Bleeding is a clinical characteristic of severe dengue and may be due to increased vascular permeability. However, the patho- genesis of severe dengue remains unclear. In this study, we showed that the Racl-microfilam...Bleeding is a clinical characteristic of severe dengue and may be due to increased vascular permeability. However, the patho- genesis of severe dengue remains unclear. In this study, we showed that the Racl-microfilament signal pathway was involved in the process of DENV serotype 2 （DENV2） infection in EAhy926 cells. DENV2 infection induced dynamic changes in actin organization, and treatment with Cytochalasin D or Jasplakinolide disrupted microfilament dynamics, reduced DENV2 entry, and inhibited DENV2 assembly and maturation. Racl activities decreased during the early phase and gradually increased by the late phase of infection. Expression of the dominant-negative form of Racl promoted DENV2 entry but inhibited viral as- sembly, maturation and release. Our findings demonstrated that Racl plays an important role in the DENV2 life cycle by reg- ulating actin reorganization in EAhy926 cells. This finding provides further insight into the pathogenesis of severe dengue.展开更多
基金National High Technology Research and Development Program of China(863program)(No.200803Z309)Optional Item of Shaanxi University of Science and Technology,China(No.ZX08-06)National Natural Science Foundation of China(No.20876090)
文摘A series of hyperbranched poly(amine-ester)polyols were synthesized by the polycondensation of N,N-diethylol-3-amine-methylpropionate(prepared by Michael addition reaction of methyl acrylate with diethanolamine)as an AB2-type monomer with trimethylol propane as the core moiety,proceeding in one-step procedure in the melt with p-toluenesulfonic acid as catalyst.The obtained monomer and polymers were characterized by FTIR and 1H-NMR spectroscopy.The solubility and surface activity in aqueous solution of the polymers were also examined.The gas permeability,water vapor permeability,and moisture absorption of microfiber synthetic leather treated by hyperbranched polymer were studied.The optimum conditions were that the dosage of dye and hyperbranched polymer was 5% and 10%,respectively.The water vapor permeability and moisture absorption of microfiber synthetic leather reached to 0.525 4 mg/(10 cm2·24 h)and 0.046 7 mg/(10 cm2·24 h).Compared with blank samples,they increased by 15% and 35%,respectively.However,the dosage of hyperbranched polymer has little influence on gas permeability of microfiber synthetic leather.SEM results show that the fiber of microfiber synthetic leather treated by hyperbranched polymer is incompact.
文摘Traditional chrome tanning technology is still widely used today. In this technology, chrome shaving as well as chrome contained effluent in tanning and retanning processes is a big issue in the industry. Wet white tanning technology has been gaining in importance in recent years, but in general, the comprehensive performance of chrome-free tanned leather is not comparable with that of chrome tanned leather. In the present work, chrome-free tanning and chrome tanning are combined in a reversed procedure, which produces leather with chrome tanned leather quality without chrome tanned leather waste problems. In this procedure, a special amphoteric organic compound, no pickle, no salt chrome-free tanning agent TWT was used to tan delimed hides （no pickle） making wet white with shrinking temperature at 80-85 ~C. Then, new method called reversed tanning further process the wet white into chrome-tanned crust. In this reversed method, retanning, fatliquoring and coloring processes were carried out before chrome tanning. This technology eliminates chrome waste issue in tanning, shaving, post tanning processes. The chrome contained effluent is only concentrated in the last chrome tanning process. The leather made with this technology has complete conventional chrome-tanned leather quality. In this way, chrome leather quality without chrome waste problems was achieved. So, it is a new clean tanning technology.
基金the Chinese Academy of Sciences and The World Academy of Sciences for sponsoring this research through the CAS-TWAS President’s Fellowship program
文摘This study is aimed at determining the level of environmental degradation as well as the concentration of trace elements in soil and stream sediments in order to evaluate the environmental impact of the mining operation.Twenty-five(25) soils and ten(10) stream sediment samples were collected from the study area. The physicochemical parameters were determined using appropriate instrumentation with the aid of a digital p H meter(Milwaukee meter) to measure the p H and electrical conductivity, total dissolved solids, moisture content and loss on ignition of the soil and stream sediment samples. The p H of the soil sample ranged from(6.10 to 7.19); Electrical conductivity ranged from(21.3 to 279.4 μS/cm), moisture content varied from(0.60% to 7.20%), and the LOI ranged from(2.03% to 18.62%). The results of the analysis showed that the concentrations of the trace elements in the soils and stream sediment samples were slightly higher than the background values. Plots of the trace elements in stream sediment samples show moderate, consistent decrease downstream except at points where there was mine water discharge into the main river. The pollution levels of heavy metals were examined in stream sediment and soil samples using different assessable indices, such as the enrichment factor, which showed significant-moderate enrichment for Cr, Th, Nb, Zn, Pb, Y and Zr and the geoaccumulation index, which showed practically moderate contamination with Cr, Ni and Sr based on regional background reference values. Geo-accumulation index and contamination index for soils and stream sediment revealed uncontaminated to moderate contamination. Likewise,elements with moderate contamination were Cr, Ni and Sr.The Pearson correlation showed that there were significant positive associations among selected metals in soil and stream sediment samples.
文摘A promising direction in the tanning industry is the use of natural minerals as environmentally friendly technologically efficient materials that are able to adjust and regulate the efficiency of formation of the dermis structure and the properties of finished leather. The use of finely-dispersed minerals promotes alignment of topographic areas in thickness, increases the yield of leather on the area by avoiding bonding structural elements of the dermis. Changes in the microstructure of the dermis, as a result of mineral filling, contribute to improvement of performance and hygienic properties of finished leather. And the study of the properties of the specified skins should be consistent with the features of operations on their cutting, shoe molding and shoe upper fixing preparations. The most important properties of leather materials, which largely determine the quality of basic technological operations of shoe manufacturing are the deformation properties. Lack of information about relaxation and deformation properties of the leather produced by the new technologies do not allow to predict their ability to form shapes and save it--indicates the relevance of this study. This paper analyzes relaxation and deformation characteristics of natural leather for shoe uppers, filled with natural minerals montmorillonite and zeolite, and the ability to predict their formation and preservation of shape in service. Features of deformation of the skin with mineral content were assessed by determining single-cycle characteristics when attaching to a complete test cycle ＂loading-unloading-rest＂ sample. Correlations of elastic and plastic （permanent） deformation have been established, kinetics of changes in linear characteristics of the samples after removal of the load has been investigated. Introduction of dispersions of mineral to the structure of the dermis contributes to the strength of semi-finished leather, increase of the uniformity of mechanical properties in the longitudinal and transverse directions and rise of shape stability index. It is shown that the direction of this study allows us to offer new competitive ecologically friendly materials to produce shoes.
文摘The nesting problem in the leather manufacturing is the problem of placing a set of irregularly shaped pieces (called stencils) on a set of irregularly shaped surfaces (called leathers sheets). This paper presents a novel and promising processing approach. After the profile of leather sheets and stencils is obtained with digitizer, the discretization makes the processing independent of the specific geometrical information. The constraints of profile are regarded thoroughly. A heuristic bottom-left placement strategy is employed to sequentially locate stencils on sheets. The optimal placement sequence and rotation are deterimined by genetic algorithms (GA). A natural concise encoding method is developed to satisfy all the possible requirements of the leather nesting problem. The experimental results show that the proposed algorithm can not only be applied to the normal two-dimensional nesting problem, but also especially suitable for the placement of multiple two-dimensional irregular stencils on multiple two-dimensional irregular sheets.
文摘Leather industry is an important light industry in China.Leather making requires a series of chemical treatment.Degreasing,unhairing and chrome tanning wastewaters are the main portions of tannery wastewater.Reclaiming and reusing these wastewaters can eliminate 80% of COD,75% of BOD,95% of chromium and 93% of sulfuret,furthermore reduce environment impact,decrease treatment costs,save chemicals and water.Some application methods of wastewater reclamation and reuse for different operations were reported.The suitable reclamation and reuse technologies can enable leather making processes more rational,and realize the recovery and recycle of several chemicals in the tannery.Resourceful utilization of tannery wastewater should mate with renovating production technology,updating equipment,and must be guaranteed sufficiently by environmental protection measures.
文摘Focusing on the economic development of its leather industry,Xinji City in the center ofHebei Province adheres to the scientific concept of development,strives to explore new ideas for industrialdevelopment,and makes tireless efforts to implement the GB/T19000 Quality Managementand Quality Assurance.This deepens the standardization of the leather industry and improves thelevel of enterprise management,serving both the economy and the enterprises.
基金supported by the National Key Programs on Basic Research of China (2011CB504703)the National Natural Science Foundations of China (81301435, 81471957, 81271839, 81401676)Beijing Natural Science Foundation (7144194)
文摘Bleeding is a clinical characteristic of severe dengue and may be due to increased vascular permeability. However, the patho- genesis of severe dengue remains unclear. In this study, we showed that the Racl-microfilament signal pathway was involved in the process of DENV serotype 2 （DENV2） infection in EAhy926 cells. DENV2 infection induced dynamic changes in actin organization, and treatment with Cytochalasin D or Jasplakinolide disrupted microfilament dynamics, reduced DENV2 entry, and inhibited DENV2 assembly and maturation. Racl activities decreased during the early phase and gradually increased by the late phase of infection. Expression of the dominant-negative form of Racl promoted DENV2 entry but inhibited viral as- sembly, maturation and release. Our findings demonstrated that Racl plays an important role in the DENV2 life cycle by reg- ulating actin reorganization in EAhy926 cells. This finding provides further insight into the pathogenesis of severe dengue.
