Experiments involving a sonar platform with a sound absorption wedge were carried out for the purpose of obtaining the low frequency acoustic characteristics. Acoustic characteristics of a sonar platform model with a ...Experiments involving a sonar platform with a sound absorption wedge were carried out for the purpose of obtaining the low frequency acoustic characteristics. Acoustic characteristics of a sonar platform model with a sound absorption wedge were measured, and the effects of different wedge laid areas on platform acoustic characteristic were tested. Vibration acceleration and self-noise caused by model vibration were measured in four conditions: 0%, 36%, 60%, and 100% of wedge laid area when the sonar platform was under a single frequency excitation force. An experiment was performed to validate a corresponding numerical calculation. The numerical vibration characteristics of platform area were calculated by the finite element method, and self-noise caused by the vibration in it was predicted by an experiential formula. The conclusions prove that the numerical calculation method can partially replace the experimental process for obtaining vibration and sound characteristics.展开更多
Gas-particle two-phase flow is a very important consideration in designing various machines. Although a great deal of theoretical, experimental, and numerical research has been carried out, particle motion in a supers...Gas-particle two-phase flow is a very important consideration in designing various machines. Although a great deal of theoretical, experimental, and numerical research has been carried out, particle motion in a supersonic flow has not been sufficiently clarified. Hence, in order to clarify the interactions between flow and particles, the authors consider the characteristics of particle motion, especially at high temperatures. In the present study, the flow of a gas with a diluted particle load is to be simulated in a conventional converging-diverging supersonic nozzle. The turbulent gas flow in the nozzle is computed with the finite difference and RANS （raynolds averaged navier-stokes simulation） methods. The particle motion is simulated in a Lagrangian manner. In addition, taking into account the light particle loading, a weak coupling method is used. Through this investigation, it is shown that the particle velocity increases monotonically from the nozzle throat to the outlet. And it is shown that particles can be accelerated to higher velocities in helium than in nitrogen, and smaller particles tend to attain higher speed and lower static temperature.展开更多
The water-cooled supersonic two-stage high-velocity oxy-fuel (HVOF) thermal spray gun was developed to make a coating of temperature-sensitive material,such as titanium,on a substrate.The gun has a combustion chamber ...The water-cooled supersonic two-stage high-velocity oxy-fuel (HVOF) thermal spray gun was developed to make a coating of temperature-sensitive material,such as titanium,on a substrate.The gun has a combustion chamber (CC) followed by a mixing chamber (MC),in which the combustion gas is mixed with the nitrogen gas at room temperature.The mixed gas is accelerated to supersonic speed through a converging-diverging (C-D) nozzle followed by a straight passage called the barrel.This paper proposes an experimental procedure to estimate the cooling rate of CC,MC and barrel separately.Then,the mathematical model is presented to predict the pressure and temperature in the MC for the specific mass flow rates of fuel,oxygen and nitrogen by assuming chemical equilibrium with water-cooling in the CC and MC,and frozen flow with constant specific heat from stagnant condition to the throat in the CC and MC.Finally,the present mathematical model was validated by comparing the calculated and measured stagnant pressures of the CC of the two-stage HVOF gun.展开更多
基金Supported by Harbin Talents of Science and Technology Innovation Special Fund(2011RFQXG021)
文摘Experiments involving a sonar platform with a sound absorption wedge were carried out for the purpose of obtaining the low frequency acoustic characteristics. Acoustic characteristics of a sonar platform model with a sound absorption wedge were measured, and the effects of different wedge laid areas on platform acoustic characteristic were tested. Vibration acceleration and self-noise caused by model vibration were measured in four conditions: 0%, 36%, 60%, and 100% of wedge laid area when the sonar platform was under a single frequency excitation force. An experiment was performed to validate a corresponding numerical calculation. The numerical vibration characteristics of platform area were calculated by the finite element method, and self-noise caused by the vibration in it was predicted by an experiential formula. The conclusions prove that the numerical calculation method can partially replace the experimental process for obtaining vibration and sound characteristics.
文摘Gas-particle two-phase flow is a very important consideration in designing various machines. Although a great deal of theoretical, experimental, and numerical research has been carried out, particle motion in a supersonic flow has not been sufficiently clarified. Hence, in order to clarify the interactions between flow and particles, the authors consider the characteristics of particle motion, especially at high temperatures. In the present study, the flow of a gas with a diluted particle load is to be simulated in a conventional converging-diverging supersonic nozzle. The turbulent gas flow in the nozzle is computed with the finite difference and RANS （raynolds averaged navier-stokes simulation） methods. The particle motion is simulated in a Lagrangian manner. In addition, taking into account the light particle loading, a weak coupling method is used. Through this investigation, it is shown that the particle velocity increases monotonically from the nozzle throat to the outlet. And it is shown that particles can be accelerated to higher velocities in helium than in nitrogen, and smaller particles tend to attain higher speed and lower static temperature.
文摘The water-cooled supersonic two-stage high-velocity oxy-fuel (HVOF) thermal spray gun was developed to make a coating of temperature-sensitive material,such as titanium,on a substrate.The gun has a combustion chamber (CC) followed by a mixing chamber (MC),in which the combustion gas is mixed with the nitrogen gas at room temperature.The mixed gas is accelerated to supersonic speed through a converging-diverging (C-D) nozzle followed by a straight passage called the barrel.This paper proposes an experimental procedure to estimate the cooling rate of CC,MC and barrel separately.Then,the mathematical model is presented to predict the pressure and temperature in the MC for the specific mass flow rates of fuel,oxygen and nitrogen by assuming chemical equilibrium with water-cooling in the CC and MC,and frozen flow with constant specific heat from stagnant condition to the throat in the CC and MC.Finally,the present mathematical model was validated by comparing the calculated and measured stagnant pressures of the CC of the two-stage HVOF gun.
