The South Asia High (SAH) is the dominant feature of the circulation in the upper troposphere and lower stratosphere (UTLS) during the boreal summer, and the upper tropospheric anticyclonic circulation extends int...The South Asia High (SAH) is the dominant feature of the circulation in the upper troposphere and lower stratosphere (UTLS) during the boreal summer, and the upper tropospheric anticyclonic circulation extends into the lower stratosphere. The preferred locations of the center of the SAH occur in two different regions, and the center can be located over the Iranian Plateau or over the Tibetan Plateau. This bimodality has an impact on the distribution of chemical constituents in the UTLS region. We analyzed water vapor (H20), carbon monoxide (CO), and ozone (03) data derived from the Aura Microwave Limb Sounder (MLS) and total column ozone data from the Ozone Monitoring Instrument (OMI). For the Iranian Plateau mode of the SAH, the tropospheric tracers exhibited a positive anomaly over the Iranian Plateau and a negative anomaly over the Tibetan Plateau, whereas the stratospheric tracer exhibited a negative and a positive anomaly over the Iranian Plateau and the Tibetan Plateau, respectively. For the Tibetan Plateau mode, however, the distribution of the anomaly was the reverse of that found for the chemical species in the UTLS region. Furthermore, the locations of the extrema within the anomaly seemed to differ across chemical species. The anomaly extrema for H20 occurred in the vicinity of the SAH ridgeline, whereas CO and O3 exhibited a northward shift of 4-8 degrees. These impacts of the variation in the SAH on the chemical constitutes in the UTLS region can be attributed in part to the dynamical structure delineated by the tropopause field and the temperature field at 100 hPa.展开更多
A study aimed at the coal seam group E and F in Pingdingshan mining area has been completed. This study is on the relationship of the coal seam methane reserve to coal thickness, coal rank, coal seam depth, surroundin...A study aimed at the coal seam group E and F in Pingdingshan mining area has been completed. This study is on the relationship of the coal seam methane reserve to coal thickness, coal rank, coal seam depth, surrounding rock and geological structure and other factors. The study indicates that different geological factor plays different role in controlling the law of coal seam methane reserve. The coal seam methane rich area, which was formed because of various factors and comprehensive effect, is the coal and methane outburst prone area, and also the key area for coal bed methane recovery. Among all factors, coal seam depth and geological structure is more important factor in affecting coal seam methane content in Pingdingshan mining area.展开更多
The distribution characteristics of cloud-top and tropopause height in the tropics and subtropics in boreal summer are analyzed based on CALIPSO data for the period 2008-2012.The maximum values of cloud-top vertical c...The distribution characteristics of cloud-top and tropopause height in the tropics and subtropics in boreal summer are analyzed based on CALIPSO data for the period 2008-2012.The maximum values of cloud-top vertical cumulative frequency above the tropopause (CTAT) are concentrated in three tropical regions:the Asian summer monsoon region,Central America,and western Africa.The contributions to the area-weighted CTAT frequency in the three regions from the Northern Hemisphere are 49.0%,13.5%,and 12.4%,respectively.Moreover,the contribution of troposphere-to-stratosphere transport (TST) in the Asian monsoon region to global TST can be far greater than 50%,according to analysis of the continuous equation,velocity potential,and divergent wind from ERA-Interim data.Furthermore,the Asian summer monsoon circulation system controls the distribution of the cloud top.On the south side of the Tibetan Plateau,the maximum frequency of the cloud top,more than 10% per 500 m vertically,is most likely to appear in the core of the high-level easterlyjet near the tropopause height (16.5 km).Over the Tibetan Plateau,the maximum frequency of the cloud top,greater than 3% per 500 m vertically,is suppressed below 11 km,far away from the thermodynamic tropopause height but close to the dynamic tropopause height of 2 PVU (potential vorticity units).展开更多
In order to enhance coal recovery ratio of open pit coal mines, a new extraction method called zonal mining system for residual coal around the end-walls is presented. The mining system can improve economic benefits b...In order to enhance coal recovery ratio of open pit coal mines, a new extraction method called zonal mining system for residual coal around the end-walls is presented. The mining system can improve economic benefits by exploiting haulage and ventilation roadways from the exposed position of coal seams by uti- lizing the existing transportation systems. Moreover, the main mining parameters have also been dis- cussed. The outcome shows that the load on coal seam roof is about 0.307 MPa and the drop step of the coal seam roof about 20.3 m when the thickness of cover and average volume weight are about 120 m and 0.023 MN/m~ respectively. With the increase of mining height and width, the coal recovery ratio can be improved. However, when recovery ratio is more than 0.85, the average stress on the coal pillar will increase tempestuously, so the recovery ratio should also be controlled to make the coal seam roof safe. Based on the numerical simulation results, it is concluded that the ratio of coal pillar width to height should be more than 1.0 to make sure the coal pillars are steady, and there are only minor dis- placements on the end-walls.展开更多
The characteristics of special apodized fiber Bragg grating (FBG) in flat-top pass-band as reflectivity filter are presented. This special apodized FBG was designed by the particle swarm optimization algorithm. Compar...The characteristics of special apodized fiber Bragg grating (FBG) in flat-top pass-band as reflectivity filter are presented. This special apodized FBG was designed by the particle swarm optimization algorithm. Compared with conventional apodized FBG, the special apodized FBG presented was more robust in the flat-top pass-band characteristic even if the strength of grating is very week. This technology is very interesting in designing the filter for wavelength division multiplexing system.展开更多
In order to prevent and control the water inflow of mines, this paper built a new initial GM(1, 1) model to torecast the maximum water inflow according to the principle of new information. The effect of the new init...In order to prevent and control the water inflow of mines, this paper built a new initial GM(1, 1) model to torecast the maximum water inflow according to the principle of new information. The effect of the new initial GM(1, 1) model is not ideal by the concrete example. Then according to the principle of making the sum of the squares of the difference between the calculated sequences and the original sequences, an optimized GM(1, I) model was established. The result shows that this method is a new prediction method which can predict the maximum water inflow accurately. It not only conforms to the guide- line of prevention primarily, but also provides reference standards to managers on making prevention measures.展开更多
The void diffusion model for mining-effected strata can be analyzed by means of a nonlinear finite element method. This paper presents the fundamental principles of the analyses. The key to the analyses is the determi...The void diffusion model for mining-effected strata can be analyzed by means of a nonlinear finite element method. This paper presents the fundamental principles of the analyses. The key to the analyses is the determination of roof subsidence and the nonlinear relationship between diffusion coefficient and subsidence. This paper discusses these problems and determines the coefficient for Pingdingshan mining district, with which several profiles are predicted. It is found that the predicted profiles are coincident with the corresponding field profiles.展开更多
Seven schemes for the developing extension, four schemes for the mining of the whole field and five schemes for the parameter are put forward in this paper to rational choice of technical reform schemes of Mine No.1. ...Seven schemes for the developing extension, four schemes for the mining of the whole field and five schemes for the parameter are put forward in this paper to rational choice of technical reform schemes of Mine No.1. Pingdingshan Mining Bureau.On the basis of conventional technical analysis, an optimum economy-mathmetical model of the developing preparatory schemes is worked out and a synthetic optimum is carried out.展开更多
In this paper,we used tectonic dynamics theories to study the tectonic evolution characteristics of the Pingdingshan mine area,and analyzed the impact of tectonic progressive control on gas occurrence.The study result...In this paper,we used tectonic dynamics theories to study the tectonic evolution characteristics of the Pingdingshan mine area,and analyzed the impact of tectonic progressive control on gas occurrence.The study results are as follows:the Pingdingshan mine area has been mainly controlled by multiple squeezing and shearing actions of the Qinling orogenic belt since early and middle Yanshan,forming the tectonic control characteristics of master control in two directions,namely NWW trending and NNE trending;the NWW trending structure is dominated by squeezing and shearing,while the NNE trending structure is dominated by tension.Progressively controlled by the structure,the gas occurrence presents partition and zonation,i.e.compared with the western structure,the eastern NWW-NW trending structure of the mine area is more highly developed,resulting in the mine area gas occurrence distribution characteristics are distinct in the east while indistinct in the west.Based on this,the mine area can be divided into the following two geological dynamic areas:the western half of mine area,namely the Guodishan fault control area,where the NW-SE trending synchronous tension action suffered by the northeast side(footwall) is relatively strong,and compared with the southwest side(hanging wall),its coal and gas outburst seriousness is weak;and the eastern half of mine area,namely the NWW-NW thrust nappe fracture fold control area,which is a serious area of coal and gas outburst,in particular the axial area of the Likou syncline is the intersection compound and combination position of the NW and NE trending structures,a tectonic concentrated area,and the gas pressure and content here are the largest.展开更多
The wind pressure pulse events, among the most important characteristics of wind pressure fluctuations on large-span flat roofs, were investigated by wind tunnel tests in this paper. Incorporating the formation mechan...The wind pressure pulse events, among the most important characteristics of wind pressure fluctuations on large-span flat roofs, were investigated by wind tunnel tests in this paper. Incorporating the formation mechanism of wind pressure pulse events, the peak over threshold method was employed to study properties of this kind of events. The event duration time, the energy contribution, the number of the pulse events, and the distribution of average peak pressure were calculated. Probability density functions of some typical samples in separation region were also given. Results show that the non-Gaussian roof pressure is strong in the flow separation region owing to the wind pressure pulse events. Evaluations of the extreme peak pressures, which can be determined by the peak over threshold method effectively, are important to the design of building cladding.展开更多
In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stres...In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stress on the stability of soft rock roadway was analyzed. The results show that the maximum principal stress is in the horizontal direction with a northeast orientation and has a value of about 1.2–1.9 times larger than gravity; the right side of roadway roof and floor is easily subject to serious deformation and failure, and the in situ stress is found to be a major factor. This paper presents important information for developing countermeasures against the large deformation of the soft rock roadway at Qingshui coal mine.展开更多
Horizontal section top-coal(HSTCC)caving offers a powerful method to efficiently excavate rude coal in steep and thick seams,and pre-blasting weakening has a profound effect on pursuing great production,high efficienc...Horizontal section top-coal(HSTCC)caving offers a powerful method to efficiently excavate rude coal in steep and thick seams,and pre-blasting weakening has a profound effect on pursuing great production,high efficiency and good benefit under particular conditions like a small-scale working face with large-scale sectional caving height.+564-level HSTCC working face in B3–6coal seams of Jiangou Colliery in Urumqi was taken as study case for in situ industrial experiment.Total thickness of seams in the study case is about 50.0 m and average angel here is over 83°.In the industrial experiments,at first we adopted continuous charge machine and emulsion matrix explosive to substitute for traditional blasting schemes for specific geological settings in the study case.Hybrid analyses and assessments with blasting crack propagation analysis,abutment pressure monitoring prediction and economical benefit assessment were attributed to be able to attest pre-blasting weakening effects practically.Meanwhile crack propagation analysis after pre-blasting weakening showed that in all triple monitoring bore holes rock masses of top-coal would be fallen into three stages from the bottom up:fracture zone,plastic zone and elastic zone generally,and fracture toughness respectively in correspondent zones was calculated by the analytical formula:0.5616–0.8806,0.6403–0.9541 and0.7535–1.1900 MPa m1/2after pre-blasting weakening.Pressure monitoring prediction and economical benefit assessment also indicated that it was necessary to introduce the pre-blasting weakening with predominant blasting scheme from both views.For excavation in extremely steep and thick coal seams,relevant results would be a useful tool to study the mechanism of pre-blasting weakening both qualitatively and quantitatively.展开更多
Sea surface height (SSH) variability in the Mindanao Dome (MD) region is found to be one of the strong variations in the northern Pacific. It is only weaker than that in the Kuroshio Extension area, and is comparable ...Sea surface height (SSH) variability in the Mindanao Dome (MD) region is found to be one of the strong variations in the northern Pacific. It is only weaker than that in the Kuroshio Extension area, and is comparable to that in the North Pacific Subtropical Countercurrent region. Based on a 1.5-layer reduced gravity model, we analyzed SSH variations in this region and their responses to northern tropical Pacific winds. The average SSH anomaly in the region varies mainly on a seasonal scale, with significant periods of 0.5 and 1 year, ENSO time scale2-7years, and time scale in excess of 8 years. Annual and long-term variabilities are comparably stronger. These variations are essentially a response to the northern tropical Pacific winds. On seasonal and ENSO time scales, they are mainly caused by wind anomalies east of the region, which generate westward-propagating, long Rossby waves. On time scales longer than 8 years, they are mostly induced by local Ekman pumping. Long-term SSH variations in the MD region and their responses to local winds are examined and discussed for the first time .展开更多
Wang Wei-fan[1] proved that the edge-face chromatic number of a 2-connected 1-tree with the maximum degree is not less than 6 is its maximum degree, and he conjectured that it is true when the maximum degree is 5. Thi...Wang Wei-fan[1] proved that the edge-face chromatic number of a 2-connected 1-tree with the maximum degree is not less than 6 is its maximum degree, and he conjectured that it is true when the maximum degree is 5. This paper proves the conjecture.展开更多
Let G be a maximal outerplane graph and X0(G) the complete chromatic number of G. This paper determines exactly X0(G) for △(G)≠5 and proves 6≤X0.(G)≤7 for △(G) = 5, where △(G) is the maximum degree of vertices o...Let G be a maximal outerplane graph and X0(G) the complete chromatic number of G. This paper determines exactly X0(G) for △(G)≠5 and proves 6≤X0.(G)≤7 for △(G) = 5, where △(G) is the maximum degree of vertices of G.展开更多
In underground mining, machine design is predominantly dictated by mine conditions and individual customer desires. In partnership with Foresight Energy, J. H. Fletcher & Company was tasked to design and manufactu...In underground mining, machine design is predominantly dictated by mine conditions and individual customer desires. In partnership with Foresight Energy, J. H. Fletcher & Company was tasked to design and manufacture a new roof bolting machine with six independent drilling apparatus on board capable of drilling and bolting the roof and ribs with material handling. The objective was to produce a machine capable of drilling and installing six bolts simultaneously with a limited number of operators. The goal of the mine is to decrease the time to bolt a cut to improve the safety level of the current roof bolting method, improve efficiency and to improve the bottom line cost of entry development. The customer wanted four drills at the front of the machine dedicated to installing roof bolts and then another two drills behind them dedicated to rib bolts. This dictated the requirement of latched controls, which would allow the operator to start drilling one hole and then latch the controls to be able to move on to the next.The result of the design is a machine with a single platform and six independent masts with drillheads:four masts strictly for drilling and installing roof bolts on the front of the platform and two masts on the back of the platform for rib bolts. The controls at each operator's station include a latch control for drilling. The six-head roof bolter allows fewer operators to drill and install roof and rib bolts, which in turn lowers the miners' roof exposure per cut. This design reduces the operator's exposure from the inherent pinch points and rotary hazards once he has engaged the latch drilling. Therefore, the machine will help to decrease the time to bolt a cut, improving productivity while enhancing the ability to operate the machine safely.展开更多
Traditional Turkish house which characterized with its original shape of the room, plan layout, construction and roof forms has two main spaces as "sofa" (common space) and the "room" differentiate it from the h...Traditional Turkish house which characterized with its original shape of the room, plan layout, construction and roof forms has two main spaces as "sofa" (common space) and the "room" differentiate it from the houses in different geographies. The flexibility of the room in traditional Turkish house is characterized with its fixed-in-furniture, which supplies all necessities of a person in a house. This paper will discuss the similarities and differences in use of space between traditional Turkish houses and today's flats in apartments. The comprehensions will be made through the field works on traditional houses and with the projects of architecture students in Mimar Sinan Fine Arts University, Istanhul. The concept of the students' projects is redesigning their own houses. Since the students come from different regions of Turkey, their houses have both similar and different spatial characteristics. Whether the cultural identity of the user plays a role in use of living space will be discussed. The aim of this study is to put the relation between the past and today's use of interior spaces of Turkish houses.展开更多
Breadth-first search(BFS) is an important kernel for graph traversal and has been used by many graph processing applications. Extensive studies have been devoted in boosting the performance of BFS. As the most effecti...Breadth-first search(BFS) is an important kernel for graph traversal and has been used by many graph processing applications. Extensive studies have been devoted in boosting the performance of BFS. As the most effective solution, GPU-acceleration achieves the state-of-the-art result of 3.3×109 traversed edges per second on a NVIDIA Tesla C2050 GPU. A novel vertex frontier based GPU BFS algorithm is proposed, and its main features are three-fold. Firstly, to obtain a better workload balance for irregular graphs, a virtual-queue task decomposition and mapping strategy is introduced for vertex frontier expanding. Secondly, a global deduplicate detection scheme is proposed to remove reduplicative vertices from vertex frontier effectively. Finally, a GPU-based bottom-up BFS approach is employed to process large frontier. The experimental results demonstrate that the algorithm can achieve 10% improvement over the state-of-the-art method on diverse graphs. Especially, it exhibits 2-3 times speedup on low-diameter and scale-free graphs over the state-of-the-art on a NVIDIA Tesla K20 c GPU, reaching a peak traversal rate of 11.2×109 edges/s.展开更多
基金supported by the National Basic Research Program of China (Grant No.2010CB428602)the National Natural Science Foundation of China (Grant No.40830102)
文摘The South Asia High (SAH) is the dominant feature of the circulation in the upper troposphere and lower stratosphere (UTLS) during the boreal summer, and the upper tropospheric anticyclonic circulation extends into the lower stratosphere. The preferred locations of the center of the SAH occur in two different regions, and the center can be located over the Iranian Plateau or over the Tibetan Plateau. This bimodality has an impact on the distribution of chemical constituents in the UTLS region. We analyzed water vapor (H20), carbon monoxide (CO), and ozone (03) data derived from the Aura Microwave Limb Sounder (MLS) and total column ozone data from the Ozone Monitoring Instrument (OMI). For the Iranian Plateau mode of the SAH, the tropospheric tracers exhibited a positive anomaly over the Iranian Plateau and a negative anomaly over the Tibetan Plateau, whereas the stratospheric tracer exhibited a negative and a positive anomaly over the Iranian Plateau and the Tibetan Plateau, respectively. For the Tibetan Plateau mode, however, the distribution of the anomaly was the reverse of that found for the chemical species in the UTLS region. Furthermore, the locations of the extrema within the anomaly seemed to differ across chemical species. The anomaly extrema for H20 occurred in the vicinity of the SAH ridgeline, whereas CO and O3 exhibited a northward shift of 4-8 degrees. These impacts of the variation in the SAH on the chemical constitutes in the UTLS region can be attributed in part to the dynamical structure delineated by the tropopause field and the temperature field at 100 hPa.
文摘A study aimed at the coal seam group E and F in Pingdingshan mining area has been completed. This study is on the relationship of the coal seam methane reserve to coal thickness, coal rank, coal seam depth, surrounding rock and geological structure and other factors. The study indicates that different geological factor plays different role in controlling the law of coal seam methane reserve. The coal seam methane rich area, which was formed because of various factors and comprehensive effect, is the coal and methane outburst prone area, and also the key area for coal bed methane recovery. Among all factors, coal seam depth and geological structure is more important factor in affecting coal seam methane content in Pingdingshan mining area.
基金supported by National Key Research and Development Program of China[grant number 2017YFC1501802]the National Natural Science Foundation of China[grant number 41375047],[grant number 91537213],and[grant number 41675039]
文摘The distribution characteristics of cloud-top and tropopause height in the tropics and subtropics in boreal summer are analyzed based on CALIPSO data for the period 2008-2012.The maximum values of cloud-top vertical cumulative frequency above the tropopause (CTAT) are concentrated in three tropical regions:the Asian summer monsoon region,Central America,and western Africa.The contributions to the area-weighted CTAT frequency in the three regions from the Northern Hemisphere are 49.0%,13.5%,and 12.4%,respectively.Moreover,the contribution of troposphere-to-stratosphere transport (TST) in the Asian monsoon region to global TST can be far greater than 50%,according to analysis of the continuous equation,velocity potential,and divergent wind from ERA-Interim data.Furthermore,the Asian summer monsoon circulation system controls the distribution of the cloud top.On the south side of the Tibetan Plateau,the maximum frequency of the cloud top,more than 10% per 500 m vertically,is most likely to appear in the core of the high-level easterlyjet near the tropopause height (16.5 km).Over the Tibetan Plateau,the maximum frequency of the cloud top,greater than 3% per 500 m vertically,is suppressed below 11 km,far away from the thermodynamic tropopause height but close to the dynamic tropopause height of 2 PVU (potential vorticity units).
文摘In order to enhance coal recovery ratio of open pit coal mines, a new extraction method called zonal mining system for residual coal around the end-walls is presented. The mining system can improve economic benefits by exploiting haulage and ventilation roadways from the exposed position of coal seams by uti- lizing the existing transportation systems. Moreover, the main mining parameters have also been dis- cussed. The outcome shows that the load on coal seam roof is about 0.307 MPa and the drop step of the coal seam roof about 20.3 m when the thickness of cover and average volume weight are about 120 m and 0.023 MN/m~ respectively. With the increase of mining height and width, the coal recovery ratio can be improved. However, when recovery ratio is more than 0.85, the average stress on the coal pillar will increase tempestuously, so the recovery ratio should also be controlled to make the coal seam roof safe. Based on the numerical simulation results, it is concluded that the ratio of coal pillar width to height should be more than 1.0 to make sure the coal pillars are steady, and there are only minor dis- placements on the end-walls.
文摘The characteristics of special apodized fiber Bragg grating (FBG) in flat-top pass-band as reflectivity filter are presented. This special apodized FBG was designed by the particle swarm optimization algorithm. Compared with conventional apodized FBG, the special apodized FBG presented was more robust in the flat-top pass-band characteristic even if the strength of grating is very week. This technology is very interesting in designing the filter for wavelength division multiplexing system.
文摘In order to prevent and control the water inflow of mines, this paper built a new initial GM(1, 1) model to torecast the maximum water inflow according to the principle of new information. The effect of the new initial GM(1, 1) model is not ideal by the concrete example. Then according to the principle of making the sum of the squares of the difference between the calculated sequences and the original sequences, an optimized GM(1, I) model was established. The result shows that this method is a new prediction method which can predict the maximum water inflow accurately. It not only conforms to the guide- line of prevention primarily, but also provides reference standards to managers on making prevention measures.
文摘The void diffusion model for mining-effected strata can be analyzed by means of a nonlinear finite element method. This paper presents the fundamental principles of the analyses. The key to the analyses is the determination of roof subsidence and the nonlinear relationship between diffusion coefficient and subsidence. This paper discusses these problems and determines the coefficient for Pingdingshan mining district, with which several profiles are predicted. It is found that the predicted profiles are coincident with the corresponding field profiles.
文摘Seven schemes for the developing extension, four schemes for the mining of the whole field and five schemes for the parameter are put forward in this paper to rational choice of technical reform schemes of Mine No.1. Pingdingshan Mining Bureau.On the basis of conventional technical analysis, an optimum economy-mathmetical model of the developing preparatory schemes is worked out and a synthetic optimum is carried out.
基金funded by Twelfth Five Year Plan Special Science and Technology of China(No.2011ZX05040-005)open fund of State Key Laboratory Cultivation Base for Gas Geology and Gas Control of China(No.WS2013A11)+1 种基金the Fundamental Research Funds for the Universities of Henan Province of China(No. NSFRF140104)the Open Project of the State Key Laboratory of Coal Resources and Safe Mining of China(No.SKLCRSM14KFB11)
文摘In this paper,we used tectonic dynamics theories to study the tectonic evolution characteristics of the Pingdingshan mine area,and analyzed the impact of tectonic progressive control on gas occurrence.The study results are as follows:the Pingdingshan mine area has been mainly controlled by multiple squeezing and shearing actions of the Qinling orogenic belt since early and middle Yanshan,forming the tectonic control characteristics of master control in two directions,namely NWW trending and NNE trending;the NWW trending structure is dominated by squeezing and shearing,while the NNE trending structure is dominated by tension.Progressively controlled by the structure,the gas occurrence presents partition and zonation,i.e.compared with the western structure,the eastern NWW-NW trending structure of the mine area is more highly developed,resulting in the mine area gas occurrence distribution characteristics are distinct in the east while indistinct in the west.Based on this,the mine area can be divided into the following two geological dynamic areas:the western half of mine area,namely the Guodishan fault control area,where the NW-SE trending synchronous tension action suffered by the northeast side(footwall) is relatively strong,and compared with the southwest side(hanging wall),its coal and gas outburst seriousness is weak;and the eastern half of mine area,namely the NWW-NW thrust nappe fracture fold control area,which is a serious area of coal and gas outburst,in particular the axial area of the Likou syncline is the intersection compound and combination position of the NW and NE trending structures,a tectonic concentrated area,and the gas pressure and content here are the largest.
基金Sponsored by the National Natural Science Foundation of China(Grant No.50708030 and 90815021)
文摘The wind pressure pulse events, among the most important characteristics of wind pressure fluctuations on large-span flat roofs, were investigated by wind tunnel tests in this paper. Incorporating the formation mechanism of wind pressure pulse events, the peak over threshold method was employed to study properties of this kind of events. The event duration time, the energy contribution, the number of the pulse events, and the distribution of average peak pressure were calculated. Probability density functions of some typical samples in separation region were also given. Results show that the non-Gaussian roof pressure is strong in the flow separation region owing to the wind pressure pulse events. Evaluations of the extreme peak pressures, which can be determined by the peak over threshold method effectively, are important to the design of building cladding.
基金provided by the Beijing Natural Science Foundation(No.8142032)the National Natural Science Foundation of China(No.41040027)+2 种基金the State Key Program of National Natural Science of China(No.5113400)the Research Fund for the Doctoral Program of Higher Education(No.20130023110021)the Special Fund of Basic Research and Operating Expenses of State Key Laboratory of Geomechanics and Deep Underground Engineering,China University of Mining&Technology,Beijing
文摘In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stress on the stability of soft rock roadway was analyzed. The results show that the maximum principal stress is in the horizontal direction with a northeast orientation and has a value of about 1.2–1.9 times larger than gravity; the right side of roadway roof and floor is easily subject to serious deformation and failure, and the in situ stress is found to be a major factor. This paper presents important information for developing countermeasures against the large deformation of the soft rock roadway at Qingshui coal mine.
基金provided by the National Natural Science Foundation of China (No.11002021)the Doctoral Subject,Foundation of the Ministry of Education of China (No.20070008012)+1 种基金the National High Technology Research and Development Program of China (No.2008AA062104)Team Program for Key Scientific and Technological innovation,Shaanxi Province of China (No.2013KCT-16)
文摘Horizontal section top-coal(HSTCC)caving offers a powerful method to efficiently excavate rude coal in steep and thick seams,and pre-blasting weakening has a profound effect on pursuing great production,high efficiency and good benefit under particular conditions like a small-scale working face with large-scale sectional caving height.+564-level HSTCC working face in B3–6coal seams of Jiangou Colliery in Urumqi was taken as study case for in situ industrial experiment.Total thickness of seams in the study case is about 50.0 m and average angel here is over 83°.In the industrial experiments,at first we adopted continuous charge machine and emulsion matrix explosive to substitute for traditional blasting schemes for specific geological settings in the study case.Hybrid analyses and assessments with blasting crack propagation analysis,abutment pressure monitoring prediction and economical benefit assessment were attributed to be able to attest pre-blasting weakening effects practically.Meanwhile crack propagation analysis after pre-blasting weakening showed that in all triple monitoring bore holes rock masses of top-coal would be fallen into three stages from the bottom up:fracture zone,plastic zone and elastic zone generally,and fracture toughness respectively in correspondent zones was calculated by the analytical formula:0.5616–0.8806,0.6403–0.9541 and0.7535–1.1900 MPa m1/2after pre-blasting weakening.Pressure monitoring prediction and economical benefit assessment also indicated that it was necessary to introduce the pre-blasting weakening with predominant blasting scheme from both views.For excavation in extremely steep and thick coal seams,relevant results would be a useful tool to study the mechanism of pre-blasting weakening both qualitatively and quantitatively.
基金Supported by the National Natural Science Foundation of China (No.40890151)the National Basic Research Program of China (973 Program)(No.2012CB417401)
文摘Sea surface height (SSH) variability in the Mindanao Dome (MD) region is found to be one of the strong variations in the northern Pacific. It is only weaker than that in the Kuroshio Extension area, and is comparable to that in the North Pacific Subtropical Countercurrent region. Based on a 1.5-layer reduced gravity model, we analyzed SSH variations in this region and their responses to northern tropical Pacific winds. The average SSH anomaly in the region varies mainly on a seasonal scale, with significant periods of 0.5 and 1 year, ENSO time scale2-7years, and time scale in excess of 8 years. Annual and long-term variabilities are comparably stronger. These variations are essentially a response to the northern tropical Pacific winds. On seasonal and ENSO time scales, they are mainly caused by wind anomalies east of the region, which generate westward-propagating, long Rossby waves. On time scales longer than 8 years, they are mostly induced by local Ekman pumping. Long-term SSH variations in the MD region and their responses to local winds are examined and discussed for the first time .
文摘Wang Wei-fan[1] proved that the edge-face chromatic number of a 2-connected 1-tree with the maximum degree is not less than 6 is its maximum degree, and he conjectured that it is true when the maximum degree is 5. This paper proves the conjecture.
基金Project supported by the Vatural SCience Foundation of LNEC.
文摘Let G be a maximal outerplane graph and X0(G) the complete chromatic number of G. This paper determines exactly X0(G) for △(G)≠5 and proves 6≤X0.(G)≤7 for △(G) = 5, where △(G) is the maximum degree of vertices of G.
文摘In underground mining, machine design is predominantly dictated by mine conditions and individual customer desires. In partnership with Foresight Energy, J. H. Fletcher & Company was tasked to design and manufacture a new roof bolting machine with six independent drilling apparatus on board capable of drilling and bolting the roof and ribs with material handling. The objective was to produce a machine capable of drilling and installing six bolts simultaneously with a limited number of operators. The goal of the mine is to decrease the time to bolt a cut to improve the safety level of the current roof bolting method, improve efficiency and to improve the bottom line cost of entry development. The customer wanted four drills at the front of the machine dedicated to installing roof bolts and then another two drills behind them dedicated to rib bolts. This dictated the requirement of latched controls, which would allow the operator to start drilling one hole and then latch the controls to be able to move on to the next.The result of the design is a machine with a single platform and six independent masts with drillheads:four masts strictly for drilling and installing roof bolts on the front of the platform and two masts on the back of the platform for rib bolts. The controls at each operator's station include a latch control for drilling. The six-head roof bolter allows fewer operators to drill and install roof and rib bolts, which in turn lowers the miners' roof exposure per cut. This design reduces the operator's exposure from the inherent pinch points and rotary hazards once he has engaged the latch drilling. Therefore, the machine will help to decrease the time to bolt a cut, improving productivity while enhancing the ability to operate the machine safely.
文摘Traditional Turkish house which characterized with its original shape of the room, plan layout, construction and roof forms has two main spaces as "sofa" (common space) and the "room" differentiate it from the houses in different geographies. The flexibility of the room in traditional Turkish house is characterized with its fixed-in-furniture, which supplies all necessities of a person in a house. This paper will discuss the similarities and differences in use of space between traditional Turkish houses and today's flats in apartments. The comprehensions will be made through the field works on traditional houses and with the projects of architecture students in Mimar Sinan Fine Arts University, Istanhul. The concept of the students' projects is redesigning their own houses. Since the students come from different regions of Turkey, their houses have both similar and different spatial characteristics. Whether the cultural identity of the user plays a role in use of living space will be discussed. The aim of this study is to put the relation between the past and today's use of interior spaces of Turkish houses.
基金Projects(61272142,61103082,61003075,61170261,61103193)supported by the National Natural Science Foundation of ChinaProject supported by the Program for New Century Excellent Talents in University of ChinaProjects(2012AA01A301,2012AA010901)supported by the National High Technology Research and Development Program of China
文摘Breadth-first search(BFS) is an important kernel for graph traversal and has been used by many graph processing applications. Extensive studies have been devoted in boosting the performance of BFS. As the most effective solution, GPU-acceleration achieves the state-of-the-art result of 3.3×109 traversed edges per second on a NVIDIA Tesla C2050 GPU. A novel vertex frontier based GPU BFS algorithm is proposed, and its main features are three-fold. Firstly, to obtain a better workload balance for irregular graphs, a virtual-queue task decomposition and mapping strategy is introduced for vertex frontier expanding. Secondly, a global deduplicate detection scheme is proposed to remove reduplicative vertices from vertex frontier effectively. Finally, a GPU-based bottom-up BFS approach is employed to process large frontier. The experimental results demonstrate that the algorithm can achieve 10% improvement over the state-of-the-art method on diverse graphs. Especially, it exhibits 2-3 times speedup on low-diameter and scale-free graphs over the state-of-the-art on a NVIDIA Tesla K20 c GPU, reaching a peak traversal rate of 11.2×109 edges/s.