期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
CASIA SS-1000 OCT与Sirius眼前节分析系统测量角膜厚度的比较 被引量:5
1
作者 孙成淑 张小兰 黄永志 《国际眼科杂志》 CAS 北大核心 2018年第1期153-155,共3页
目的:比较扫频CASIA SS-1000 OCT与Sirius眼前节分析仪两种仪器测量正常人角膜顶点厚度(CCT)和最薄点角膜厚度(TCT)结果的差异性、相关性及一致性,为临床的应用提供理论依据。方法:前瞻性研究。收集近视患者34例,均由同一熟练操作者对... 目的:比较扫频CASIA SS-1000 OCT与Sirius眼前节分析仪两种仪器测量正常人角膜顶点厚度(CCT)和最薄点角膜厚度(TCT)结果的差异性、相关性及一致性,为临床的应用提供理论依据。方法:前瞻性研究。收集近视患者34例,均由同一熟练操作者对受检者右眼进行测量,先采用Sirius眼前节分析仪,再使用SS-1000 OCT重复测量角膜厚度。配对t检验及Bland-Altman用于评估SS-1000 OCT与Sirius眼前节分析仪的角膜顶点及角膜最薄点的一致性。结果:SS-1000 OCT及Sirius角膜地形图仪测量CCT的角膜顶点均值分别为517.62±25.29、518.47±27.23μm。SS-1000 OCT及Sirius眼前节分析仪CCT的角膜最薄点均值分别为513.53±25.06、515.32±26.69μm。两者角膜顶点角膜厚度比较,差异无统计学意义(P>0.05),但两者角膜最薄点的角膜厚度比较,差异具有统计学意义(P<0.05)。两种设备测量的角膜厚度有较好的相关性(r=0.969、0.965,均P<0.05)。做Bland-Altman分析,角膜顶点厚度的95%一致性界限为(-14.22μm,12.52μm),角膜最薄点厚度的95%一致性界限为(-15.61μm,12.03μm),4%(3/68)的点在95%一致性的界限外,但角膜最薄点的一致性差异更大。结论:SS-1000 OCT测量CCT与Sirius眼前节分析仪具有高度的一致性,在临床工作中,可以考虑相互替代。 展开更多
关键词 眼前节OCT 眼前节分析仪 顶点角膜厚度 最薄点角膜厚度 一致性分析
下载PDF
SMILE、FS-LASIK及Trans-PRK手术后角膜厚度和屈光度稳定性的比较
2
作者 徐玲玲 游昌涛 +1 位作者 李帅飞 陈东栋 《眼科》 CAS 2023年第6期496-501,共6页
目的比较SMILE、FS-LASIK及Trans-PRK手术后角膜厚度和屈光度的稳定性。设计回顾性病例系列。研究对象2021年1月~2021年7月SMILE、FS-LASIK及Trans-PRK三种手术的近视患者108例,每组36例,以右眼作为研究对象。方法回顾术前及术后2周、1... 目的比较SMILE、FS-LASIK及Trans-PRK手术后角膜厚度和屈光度的稳定性。设计回顾性病例系列。研究对象2021年1月~2021年7月SMILE、FS-LASIK及Trans-PRK三种手术的近视患者108例,每组36例,以右眼作为研究对象。方法回顾术前及术后2周、1个月、3个月、6个月和1年的角膜顶点厚度(ACT)及等效球镜度(SE),比较一种手术不同时间及各时间点三种手术的ACT、SE。主要指标ACT、SE。结果术后ACT比较:SMILE术后2周最薄,其次是术后1个月(P均<0.05);FS-LASIK除了术后1个月、6个月与3个月比较无统计学意义外,其余各时间点比较均为逐渐增厚(P均<0.001);Trans-PRK术后1个月和3个月与其他时间比较差异均有统计学意义(P均<0.05),术后早期ACT较厚,然后逐渐变薄,后又逐渐增厚并趋于稳定;同一时间点三种手术方式比较:各时间点SMILE及Trans-PRK的ACT都比FS-LASIK厚,差异均有统计学意义(P<0.05)。术后SE比较:SMILE术后2周比1年屈光度较高,差异有统计学意义(P=0.037);FS-LASIK术后早期(1个月)屈光度不稳定(P均<0.05);Trans-PRK术后1个月、6个月与1年比较有统计学意义(P均=0.002);同一时间点三种手术方式比较:术后2周时SMILE比FS-LASIK屈光度低,差异有统计学意义(P=0.022),其余各时间点三种手术之间均无统计学意义。在术后1年时SMILE、FS-LASIK及Trans-PRK的SE在±0.50 D内占比分别为61%、53%和64%,在±1.00 D内占比分别为93%、89%和89%。结论三种手术方式均在3~6个月后均趋向稳定并稍有增厚,各时间点SMILE与Trans-PRK的角膜厚度均厚于FS-LASIK;三种手术的SE随时间均有轻度回退,但SMILE与Trans-PRK术后在不同的屈光度范围内各有优势,均优于FS-LASIK。对于中低度近视或薄角膜可优选Trans-PRK,对于中高度近视可优选SMILE,对于高度近视或薄角膜选择FS-LASIK时需多关注回退问题。 展开更多
关键词 SMILE FS-LASIK Trans-PRK 角膜顶点厚度 屈光度
原文传递
SMILE、FS-LASIK及Trans-PRK三种屈光手术切削深度预测性的比较 被引量:2
3
作者 徐玲玲 游昌涛 +1 位作者 李帅飞 陈东栋 《眼科》 CAS 2022年第6期470-472,共3页
回顾性分析角膜屈光矫正手术的178例近视患者的临床资料。分为飞秒激光小切口角膜基质透镜取出术(SMILE)组、飞秒制瓣准分子激光原位角膜磨镶术(FS-LASIK)组及智能脉冲技术联合准分子激光屈光性角膜切削术(Trans-PRK)组三种比较三组患... 回顾性分析角膜屈光矫正手术的178例近视患者的临床资料。分为飞秒激光小切口角膜基质透镜取出术(SMILE)组、飞秒制瓣准分子激光原位角膜磨镶术(FS-LASIK)组及智能脉冲技术联合准分子激光屈光性角膜切削术(Trans-PRK)组三种比较三组患者手术预测切削量与实际切削量之间的差值,以了解三种手术切削深度的预测性:结果发现SMILE预测切削量比实际切削量偏厚,Trans-PRK预测切削量比实际切削量偏薄;FS-LASIK切削深度的预测性较好。 展开更多
关键词 角膜屈光手术 角膜顶点厚度 切削深度
原文传递
Effects of corneal thickness distribution and apex position on postoperative refractive status after full-bed deep anterior lamellar keratoplasty
4
作者 Bing-hong WANG Ye-sheng XU +1 位作者 Wen-jia XIE Yu-feng YAO 《Journal of Zhejiang University-Science B(Biomedicine & Biotechnology)》 SCIE CAS CSCD 2018年第11期863-870,共8页
Objective: To investigate the effects of corneal thickness distribution and apex position on postoperative refractive status after full-bed deep anterior lamellar keratoplasty (FBDALK). Methods: This is a retrospe... Objective: To investigate the effects of corneal thickness distribution and apex position on postoperative refractive status after full-bed deep anterior lamellar keratoplasty (FBDALK). Methods: This is a retrospective analysis of patients who were diagnosed with advanced keratoconus between 2011 and 2014 in our hospital. The base of the cone in all patients did not exceed the central cornea at a 6-mm range. The FBDALK was performed by a same surgeon. All patients had a complete corneal suture removal and the follow-up records were intact. Patients who had graft-bed misalignment or who were complicated with a cataract or glaucoma were excluded. Uncorrected visual acuity (UCVA), best spectacle corrected visual acuity (BSCVA), and Pentacam examination data were recorded at two years postoperatively. The recorded data included the superior-inferior (S-I) and nasal-temporal (N-T) corneal thickness differences in 2, 4, 6, and 8 mm diameter concentric circles with the corneal apex as the center (S-I2 mm, S-14 mm, S-I6mm,, S-I8mm, N-T2mm, N-T4 mm, N-T6 mm, and N-T8 mm), the linear, X-axis, and Y-axis distance between the corneal pupillary center and the cornea apex, total corneal astigmatism at a zone of 3 mm diameter from the corneal apex (TA3 mm), the astigmatic vector values J0 and J4s, and the corneal total higher-order aberration for 3 and 6 mm pupil diameters (HOA3 mm and HOA6mm). Statistical analysis was performed by SPSS 15.0. Results: A total of 47 eyes of 46 patients met the criteria and were included in this study. The mean follow-up time was (28±7) months. The mean UCVA was 0.45±0.23 (IogMAR) (MAR: minimum angle of resolution) and the mean BSCVA was 0.19±0.15 (IogMAR), which were all sig- nificantly positively correlated with postoperative TA3 mm and HOA3 turn. The mean S-I corneal thickness differences were (44.62±37.74) IJm, and the mean N-T was (38.57±32.29) pm. S-12 mm was significantly positively correlated with J0 (r=0.31), J45 (r=0.42), HOA3 mm (r=0.37), and HOA6 mm (r=0.48). S-14 mm and S-Is mm were significantly positively corre- lated with HOA3 mm (t=0.30, t=0.40) and HOA6 mm (r=0.46, r=0.35). The X-axis distance between corneal pupillary center and corneal apex was significantly positively correlated with J45 (r=0.29). Conclusions: In patients with ad- vanced keratoconus after FBDALK, the unevenly distributed thickness at corneal pupillary area and the misalignment of corneal apex and pupillary center might cause significant regular and irregular astigmatism, which affected the postoperative visual quality. 展开更多
关键词 Full-bed deep anterior lamellar keratoplasty Corneal thickness distribution Corneal apex
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部