Based on the research of two geophone types （10 Hz moving-coil velocity and piezoelectric acceleration） and their velocity and acceleration parameters, frequency response functions have been determined, as well as t...Based on the research of two geophone types （10 Hz moving-coil velocity and piezoelectric acceleration） and their velocity and acceleration parameters, frequency response functions have been determined, as well as the differences between them. Also, shock- vibration tests have been accomplished, not only to explain the two shock response signal differences, but also to analyze the response signal characteristics and its ability to carry information. In addition, seismic data acquisition experiments have been carried out under comparable conditions in the field. A contrast analysis of shot gathers and stack profiles acquired with the two geophone types is given in this paper. The results show that the acceleration signal from the acceleration geophone has a better advantage in terms of high signal-to-noise ratio, high accuracy, high resolution, and quantity of information to better meet current and future requirements for seismic exploration.展开更多
A Michelson interferometer based sensor, to monitor the displacement and vibration of a surface, is presented. The interference signals detected in quadrature are processed using analog electronics to find the directi...A Michelson interferometer based sensor, to monitor the displacement and vibration of a surface, is presented. The interference signals detected in quadrature are processed using analog electronics to find the direction of the motion of a vibrating surface in real-time. The complete instrumentation and signal processing are implemented for the interpretation of the amplitude as well as positive and negative excursion of the vibration cycles. This new technique is simpler as compared to the techniques commonly used in the interferometer based vibration sensors. Using this technique, we have measured mechanical vibrations having a magnitude of the order of nanometers and frequency in the range of 50Hz to 500Hz. By making small changes in the electronic circuit, the technique can be implemented for the extended range of the vibration frequencies and amplitude.展开更多
In this paper,we report the frequency comb response experimentally and analytically in a rhombic micro-resonator with parametrical modulation.When the electrostatically actuated rhombic micro-resonator is modulated ax...In this paper,we report the frequency comb response experimentally and analytically in a rhombic micro-resonator with parametrical modulation.When the electrostatically actuated rhombic micro-resonator is modulated axially by a low-frequency periodic excitation,a comb-like vibration response with few equidistant positioned fingers in the frequency domain is observed.The finger spacing of frequency comb response is exactly consistent with modulation frequency and the number and amplitude of the fingers can be tuned by modulation strength.A mixed frequency comb with extra comb fingers is further generated when the resonator is modulated simultaneously by two different low-frequency excitation signals.By adjusting the relation of the two modulation frequencies,unequal spacing frequency combs are achieved for the first time,which leads to a more flexible tunability of the comb spacing for different applications.Theoretical analysis based on the dynamic model well explains the corresponding observations.展开更多
基金supported jointly by the National Natural Science Foundation Fund of China (No.40930418)Chinese government-funded scientific program of the Sino Probe Deep Exploration in China (SinoProbe03)the National Science and Technology Support Program Project (No. 2011BAB04B01)
文摘Based on the research of two geophone types （10 Hz moving-coil velocity and piezoelectric acceleration） and their velocity and acceleration parameters, frequency response functions have been determined, as well as the differences between them. Also, shock- vibration tests have been accomplished, not only to explain the two shock response signal differences, but also to analyze the response signal characteristics and its ability to carry information. In addition, seismic data acquisition experiments have been carried out under comparable conditions in the field. A contrast analysis of shot gathers and stack profiles acquired with the two geophone types is given in this paper. The results show that the acceleration signal from the acceleration geophone has a better advantage in terms of high signal-to-noise ratio, high accuracy, high resolution, and quantity of information to better meet current and future requirements for seismic exploration.
文摘A Michelson interferometer based sensor, to monitor the displacement and vibration of a surface, is presented. The interference signals detected in quadrature are processed using analog electronics to find the direction of the motion of a vibrating surface in real-time. The complete instrumentation and signal processing are implemented for the interpretation of the amplitude as well as positive and negative excursion of the vibration cycles. This new technique is simpler as compared to the techniques commonly used in the interferometer based vibration sensors. Using this technique, we have measured mechanical vibrations having a magnitude of the order of nanometers and frequency in the range of 50Hz to 500Hz. By making small changes in the electronic circuit, the technique can be implemented for the extended range of the vibration frequencies and amplitude.
基金the National Natural Science Foundation of China(Grant Nos.12172323 and 52075432)Zhejiang Provincial Natural Science Foundation of China(Grant No.LZ22A020003)+1 种基金Fundamental Research Funds for the Central Universities(Grant No.G2022KY05104)Program for Innovation Team of Shaanxi Province(Grant No.2021TD-23).
文摘In this paper,we report the frequency comb response experimentally and analytically in a rhombic micro-resonator with parametrical modulation.When the electrostatically actuated rhombic micro-resonator is modulated axially by a low-frequency periodic excitation,a comb-like vibration response with few equidistant positioned fingers in the frequency domain is observed.The finger spacing of frequency comb response is exactly consistent with modulation frequency and the number and amplitude of the fingers can be tuned by modulation strength.A mixed frequency comb with extra comb fingers is further generated when the resonator is modulated simultaneously by two different low-frequency excitation signals.By adjusting the relation of the two modulation frequencies,unequal spacing frequency combs are achieved for the first time,which leads to a more flexible tunability of the comb spacing for different applications.Theoretical analysis based on the dynamic model well explains the corresponding observations.
