Spray drying is an important continuous industrial process for drying pumpable liquid formulations irrespective of their heat sensitivity, rheology, solids content and processing rate. Furthermore spray drying has the...Spray drying is an important continuous industrial process for drying pumpable liquid formulations irrespective of their heat sensitivity, rheology, solids content and processing rate. Furthermore spray drying has the capability through drying chamber design, plant layout and mode of operation to produce dried products of specific particulate size and morphology. These are important aspects when spray drying technology is applied to the needs of customized powder manufacture. There are many examples in industry where spray dried powders have to meet stringent specifications set by such factors as end-product powder quality standards dictated by global competition,dry raw material characteristics required for optimum downstream processing, and dry materials handling to comply with environmental, health and safety issues. Spray drying is no longer regarded just as a convective industrial drying concept, but also as an integral part of modern manufacturing practices applying powder technology. This paper reviews the aspects of spray dryer design and operation for consideration when customized powder manufacture is involved.展开更多
The particle deposition behaviour of skim milk, water and maltodextrin in the conical section of a pilot-scale spray dryer was predicted using simple correlations for particle depositions in pipes. The predicted parti...The particle deposition behaviour of skim milk, water and maltodextrin in the conical section of a pilot-scale spray dryer was predicted using simple correlations for particle depositions in pipes. The predicted particle deposition fluxes of these materials were then compared with the measured deposition fluxes. The predicted particle deposition regimes of the spray dryer were expected to be in the diffusional and mixed (diffusional and inertial) regimes, but the experimental results suggested that the particle deposition was mainly in the inertial regime. Therefore, using the pipe correlations for predicting deposition in a pilot-scale spray dryer suggests that they do not sufficiently represent the actual deposition behaviour. This outcome indicates that a further study of particle flow patterns needs to be carried out using numerical simulations (computational fluid dynamics, CFD) in view of the additional geometrical complexity of the spray dryer.展开更多
In China,the abrasion index and the free moisture are regarded as the criteria for determining whether the medium-speed pulverizer or the fan pulverizer could be selected.Based on comprehensive studies on foreign meth...In China,the abrasion index and the free moisture are regarded as the criteria for determining whether the medium-speed pulverizer or the fan pulverizer could be selected.Based on comprehensive studies on foreign methods for choosing the pulverizing system for lignite boilers,it is suggested that the particle size of coal,the drying time,the drying temperature and the humidity should be taken into account when measuring the free moisture of lignite,and the total moisture could also be the principle for type selection of pulverizer for lignite boilers.Furthermore,the determination of pulverized-coal moisture has great influence on the running of pulverizing systems.The actual moisture of certain pulverized coals is compared with that calculated with different methods and a feasible method for determining the moisture of the pulverized coal is suggested.展开更多
Particles behaviour was monitored and analyzed in a stormwater wetland over a period of 4 months (June-September,2009).The results indicated that the particles behaviour can be affected by many processes,such as sedim...Particles behaviour was monitored and analyzed in a stormwater wetland over a period of 4 months (June-September,2009).The results indicated that the particles behaviour can be affected by many processes,such as sedimentation,resuspension,adsorption and release in stormwater wetlands during dry days.Due to the effects of these factors,the particles removal efficiency calculated based on the settling theory was significantly higher than the value obtained using the measured particles number concentration.And the measured efficiency showed a turning point in the range of 2-4 μm,which was within the colloidal particles range.Analysis of particle size distribution showed that particles were finer in the outflow than inflow due to sedimentation of the coarse particles and resuspension of the fine particles in the wetland.Particles in different size ranges play different roles in their contribution to turbidity and total suspended solids concentration.The finer particles (less than 10μm) showed a closer relationship with the turbidity while coarser particles (>4μm) were more related to total suspended solid concentration.展开更多
文摘Spray drying is an important continuous industrial process for drying pumpable liquid formulations irrespective of their heat sensitivity, rheology, solids content and processing rate. Furthermore spray drying has the capability through drying chamber design, plant layout and mode of operation to produce dried products of specific particulate size and morphology. These are important aspects when spray drying technology is applied to the needs of customized powder manufacture. There are many examples in industry where spray dried powders have to meet stringent specifications set by such factors as end-product powder quality standards dictated by global competition,dry raw material characteristics required for optimum downstream processing, and dry materials handling to comply with environmental, health and safety issues. Spray drying is no longer regarded just as a convective industrial drying concept, but also as an integral part of modern manufacturing practices applying powder technology. This paper reviews the aspects of spray dryer design and operation for consideration when customized powder manufacture is involved.
文摘The particle deposition behaviour of skim milk, water and maltodextrin in the conical section of a pilot-scale spray dryer was predicted using simple correlations for particle depositions in pipes. The predicted particle deposition fluxes of these materials were then compared with the measured deposition fluxes. The predicted particle deposition regimes of the spray dryer were expected to be in the diffusional and mixed (diffusional and inertial) regimes, but the experimental results suggested that the particle deposition was mainly in the inertial regime. Therefore, using the pipe correlations for predicting deposition in a pilot-scale spray dryer suggests that they do not sufficiently represent the actual deposition behaviour. This outcome indicates that a further study of particle flow patterns needs to be carried out using numerical simulations (computational fluid dynamics, CFD) in view of the additional geometrical complexity of the spray dryer.
文摘In China,the abrasion index and the free moisture are regarded as the criteria for determining whether the medium-speed pulverizer or the fan pulverizer could be selected.Based on comprehensive studies on foreign methods for choosing the pulverizing system for lignite boilers,it is suggested that the particle size of coal,the drying time,the drying temperature and the humidity should be taken into account when measuring the free moisture of lignite,and the total moisture could also be the principle for type selection of pulverizer for lignite boilers.Furthermore,the determination of pulverized-coal moisture has great influence on the running of pulverizing systems.The actual moisture of certain pulverized coals is compared with that calculated with different methods and a feasible method for determining the moisture of the pulverized coal is suggested.
基金supported by the National Natural Science Foundation of China (GrantNo.:51002196,and 51009156)the Fundamental Research Funds for the Central Universities (Grant No.11lgpy100)the Natural Science Foundation of Guangdong Province (Grant No.10451061101005309)
文摘Particles behaviour was monitored and analyzed in a stormwater wetland over a period of 4 months (June-September,2009).The results indicated that the particles behaviour can be affected by many processes,such as sedimentation,resuspension,adsorption and release in stormwater wetlands during dry days.Due to the effects of these factors,the particles removal efficiency calculated based on the settling theory was significantly higher than the value obtained using the measured particles number concentration.And the measured efficiency showed a turning point in the range of 2-4 μm,which was within the colloidal particles range.Analysis of particle size distribution showed that particles were finer in the outflow than inflow due to sedimentation of the coarse particles and resuspension of the fine particles in the wetland.Particles in different size ranges play different roles in their contribution to turbidity and total suspended solids concentration.The finer particles (less than 10μm) showed a closer relationship with the turbidity while coarser particles (>4μm) were more related to total suspended solid concentration.
