期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
石家庄大叶黄杨叶片滞尘量及滞尘颗粒物的粒度 被引量:15
1
作者 李瑞雪 张明军 张永芳 《城市环境与城市生态》 CAS CSCD 2009年第1期15-19,共5页
大叶黄杨强滞尘能力是城市近地面层环境中清除颗粒物污染的重要机制。以大气颗粒物污染严重的石家庄市为代表,选取石家庄裕华路北部市区为研究范围,对大叶黄杨叶片的滞尘效应及滞尘颗粒物粒度特征进行了研究。结果表明,在晴朗或多云微... 大叶黄杨强滞尘能力是城市近地面层环境中清除颗粒物污染的重要机制。以大气颗粒物污染严重的石家庄市为代表,选取石家庄裕华路北部市区为研究范围,对大叶黄杨叶片的滞尘效应及滞尘颗粒物粒度特征进行了研究。结果表明,在晴朗或多云微风天气条件下,30个取样点的大叶黄杨叶片平均滞尘量为0.356g/(m2.d),颗粒物的平均粒度值为1.91μm。大叶黄杨叶片滞尘量在石家庄市不同地区的差异排序为:北二环地区>体育大街与东二环地区>中华大街与西二环地区>西郊>东郊>火车站附近地区>博物馆周边地区。因此,石家庄市大气环境治理应针对不同地段的污染情况采取不同的治理方法。 展开更多
关键词 大叶黄杨 滞尘量 颗粒物粒度 大气 石家庄
下载PDF
化学生物絮凝工艺的反应机理初探 被引量:5
2
作者 张志斌 赵建夫 +2 位作者 夏四清 刘长青 王学江 《环境科学》 EI CAS CSCD 北大核心 2007年第5期993-996,共4页
考察了化学生物絮凝工艺中的Zeta电位、颗粒物粒度分布和溶解性有机物的分子质量分级,并分别与化学强化一级工艺和初沉池进行了对比.研究表明,相同药剂投加量下,化学生物絮凝工艺和化学强化一级工艺的出水Zeta电位值基本相等,化学生物... 考察了化学生物絮凝工艺中的Zeta电位、颗粒物粒度分布和溶解性有机物的分子质量分级,并分别与化学强化一级工艺和初沉池进行了对比.研究表明,相同药剂投加量下,化学生物絮凝工艺和化学强化一级工艺的出水Zeta电位值基本相等,化学生物絮凝工艺的回流污泥所携带的化学药剂几乎不影响反应池内颗粒物的稳定状态,其中的生物作用是该工艺对污染物的絮凝效果优于化学强化一级工艺的关键因素.在化学生物絮凝工艺中,投加药剂仅对粒径>10μm颗粒物和分子质量>6ku溶解性有机物有较好的去除效果,而生物絮凝作用不但可以促进对大粒径颗粒物和大分子质量溶解性有机物的去除,而且对小粒径颗粒物和小分子质量溶解性有机物也有较好的去除,其出水中粒径>3μm的颗粒物被完全去除,分子质量为2-6ku的溶解性有机物的去除率也高达42.5%. 展开更多
关键词 化学生物絮凝工艺 ZETA电位 颗粒物粒度分布 分子质量分级
下载PDF
贵州贫困农村室内不同燃料产生PM_(10)的微观特征
3
作者 李金娟 郭兴强 +1 位作者 俞相阳 杨荣师 《中国环境科学》 EI CAS CSCD 北大核心 2012年第3期419-425,共7页
应用高分辨率扫描电镜(SEM)和图像分析研究了贵州贫困农村不同燃料类型(拌泥煤、煤、蜂窝煤和柴)产生室内PM10的微观形貌和不同类型颗粒物的数量-粒度、体积-粒度分布.结果表明:不同类型燃料产生的PM10中颗粒物以烟尘及其集合体、矿物... 应用高分辨率扫描电镜(SEM)和图像分析研究了贵州贫困农村不同燃料类型(拌泥煤、煤、蜂窝煤和柴)产生室内PM10的微观形貌和不同类型颗粒物的数量-粒度、体积-粒度分布.结果表明:不同类型燃料产生的PM10中颗粒物以烟尘及其集合体、矿物颗粒和飞灰为主,烟尘及其集合体均达到72.69%以上;在数量-粒度分布上,以煤和蜂窝煤燃烧产生的PM10中烟尘集合体和燃煤飞灰呈单峰分布;以拌泥煤为燃料产生的室内PM10中烟尘及其集合体呈单峰分布,燃煤飞灰呈双峰分布;以柴为燃料的室内PM10中烟尘及其集合体呈单峰分布.不同类型燃料产生的PM10中颗粒物体积-粒度分布基本呈单峰分布,主要分布在粒径>1.0μm. 展开更多
关键词 可吸入颗粒物(PM10)微观形貌:粒度分布:燃料类型 室内颗粒
下载PDF
Features of Sand-dust Deposits in Harbin City,China 被引量:5
4
作者 XIE Yuanyun ZHANG yan +2 位作者 HE Kui ZHOU Jia KANG Chunguo 《Chinese Geographical Science》 SCIE CSCD 2006年第4期327-333,共7页
From the sedimentologic view, this paper analyses the grain-size distribution and the chemical composition of the deposits from sand-dust storm, occurring in Harbin on March 20, 2002. The result indicates that there e... From the sedimentologic view, this paper analyses the grain-size distribution and the chemical composition of the deposits from sand-dust storm, occurring in Harbin on March 20, 2002. The result indicates that there exist plentiful coarse matters in the sand-dust deposits in Harbin, and the sand-dust composition presents obvious three peak distribution characteristics, indicating that the sand-dust in Harbin is composed of multi-origin components. The grain-size composition consists of silt (4-8Φ), accounting for 71.18% of the total, sand (〉4Φ), 21.70%, and clay (〈8Φ), only 7.13%. The average grain size (Mz) is 5.14Φ. The chemical elements of the deposits are mainly SiO2 and A1203 and Fe203, totally occupying 77.8%. The enrichment factors (EF) of Mg, K, Si, Fe, Mn, P, Ti, Co, Ni and V elements are all about 1, which mainly come fi'om lithosphere source, while parts of Cu, Pb, Zn, Cr and Se elements are from pollution sources out of lithosphere source, and As, Cd and Sb elements are mainly from pollution sources. Based on the comprehensive analysis of grain-size, chemical composition, enrichment factor (EF), discriminant function (DF) and matter source index (PI), this paper points out that the grain-size distribution and element composition of the sand-dust deposits in Harbin are evidently different from the loess and sand-dust in Lanzhou, and that matter source of the sand-dust in Harbin is different from the loess in Northwest China and the sand-dust in Lanzhon. The sand-dust deposits in Harbin are an admixture of coarse grains transmitted in short distance and fine grains transported in long distance. The plentiful coarse grains of the sand-dust deposits in Harbin origin from sand of local spot, and are the near-souroe deposits transported by low altitude airflow. 展开更多
关键词 sand-dust storm grain-size composition chemical composition HARBIN
下载PDF
Application of response surface methodology in optimization of bioleaching parameters for high-magnesium nickel sulfide ore 被引量:3
5
作者 SUN Jian-zhi WU Biao +1 位作者 CHEN Bo-wei WEN Jian-kang 《Journal of Central South University》 SCIE EI CAS CSCD 2022年第5期1488-1499,共12页
The response surface methodology(RSM)was used to optimize the operating parameters during the bioleaching of Jinchuan high-magnesium nickel sulfide ore.The particle size,acid addition,pulp density and inoculation amou... The response surface methodology(RSM)was used to optimize the operating parameters during the bioleaching of Jinchuan high-magnesium nickel sulfide ore.The particle size,acid addition,pulp density and inoculation amount were chosen as the investigated parameters.To maximize the leaching efficiency of nickel,copper,cobalt and minimize the dissolution of magnesium and iron ions,the model suggested a combination of optimal parameters of particles less than 0.074 mm being 72.11%,sulfuric acid addition being 300 kg/t,pulp density being 5%and inoculation amount being 12.88%.Under the conditions,the average results of three parallel experiments were 89.43%of nickel leaching efficiency,36.78%of copper leaching efficiency,84.07%of cobalt leaching efficiency,49.19%of magnesium leaching efficiency and 0.20 g/L of iron concentration.The model indicated that the most significant factor in response of the leaching efficiency of valuable metal is the particle size,and the most significant factor in response to the leaching efficiency of harmful ions(Mg2+)is the amount of sulfuric acid addition.And according to the suggested models,no significance of the interaction effect between particle size and acid addition was shown.Under the optimized parameters suggested by models,the valuable metals could be separated from harmful ions during the bioleaching process. 展开更多
关键词 high-magnesium nickel sulfide ore BIOLEACHING response surface methodology particle size acid consumption
下载PDF
Steady-State Properties of Driven Polydisperse Granular Mixtures
6
作者 李睿 张端明 +1 位作者 肖明 李志浩 《Communications in Theoretical Physics》 SCIE CAS CSCD 2011年第12期1145-1148,共4页
We represent a two-dimensional model of polydisperse granular mixtures with a power-law size distribution. The model consists of smooth hard disks in a rectangular box with inelastic collisions,driven by a homogeneous... We represent a two-dimensional model of polydisperse granular mixtures with a power-law size distribution. The model consists of smooth hard disks in a rectangular box with inelastic collisions,driven by a homogeneous heat bath at zero gravity.The width of particle size distribution is characterized by the only parameter,namely,the fractal dimension D.The energy dissipation of the mixture is increased as D increases or as e decreases.Furthermore,it is found that the steady-state properties of the mixture such as the collision rate,granular temperature,kinetic pressure and velocity distribution depend sensitively on size distribution parameter D. 展开更多
关键词 fractal dimension polydisperse mixtures
下载PDF
Effect of stirring on preparation of hollow copolymer particles by alkali/cooling method
7
作者 李海普 OKUBO M SUZUKI T 《Journal of Central South University》 SCIE EI CAS 2009年第4期563-568,共6页
Hollow particles were prepared by the treatment of styrene-metbacrylic acid copolymer particles with alkali/cooling method. The influences of stirring position (in aqueous phase or at the interface of O/W) and stirr... Hollow particles were prepared by the treatment of styrene-metbacrylic acid copolymer particles with alkali/cooling method. The influences of stirring position (in aqueous phase or at the interface of O/W) and stirring speed (90, 110 and 240 r/min) on the formation of hollow particles were investigated. It is found that the soft stirring in aqueous phase at 90 r/min leads to the formation of monohollow particles, while the violent stirring at the interface of O/W and 240 r/min gives non-hollow products. In contrast, the weak stirring in aqueous phase at 110 r/min results in sterically heterogeneous dispersion of methacrylic acid-rich regions within the original particles, and hence the formation of multihollow particles. Further investigation indicates that the change of stirring efficiency provides a way to tune the diffusion behavior of monomer styrene, and therefore influences the distribution of methacrylic acid units in the original particles as well as the morphology of the treated particles. 展开更多
关键词 hollow polymer particle stirring effect morphology emulsion copolymerization
下载PDF
Size Distribution of Particulate Matter of Metals in Urban Aerosols, Comarca Lagunera, Mexico
8
作者 Roman Perez Sylvia Miranda +4 位作者 Alfredo Campos Jorge Carrillo Elias Ramirez Gonzalo Garcia Herrera 《Journal of Environmental Science and Engineering(A)》 2012年第11期1260-1266,共7页
This paper has demonstrated that there is great variation in the size range and chemical composition of metalliferous PM (particulate matter) present within Comarca Lagunera, M6xico due to the physiography of the te... This paper has demonstrated that there is great variation in the size range and chemical composition of metalliferous PM (particulate matter) present within Comarca Lagunera, M6xico due to the physiography of the terrain together the intense vehicular traffic, unpaved roads, cement and lime plants, marble quarries, brick plants, and the largest smelter of non-ferrous material in Latin America. Cascade impactor PM samples from six size ranges: 〈 0.49 μm, 0.49-0.9 μm, 0.9-1.5μm, 1.5-3.0 p.m, 3.0-7.2 μm and 7.2-10 μm were collected from inside two stacks within G6mez Palacios and Torreon cities. ICP-AES (inductively coupled plasma-atomic emission spectrometry) analysis on collected Whatman fiberglass filters demonstrates that the PM are matrices mostly constituted of carbonates and silicates with abundant fine metalliferous particles. The metals with the most concentrations averaged over all size ranges were Cu, Fe, Mn, Ni, Pb and Ti. The size distributions of metals detected in this work have been plotted as normalized histogram concentration of each size fraction, the total concentration, and the aerodynamic particle diameter, which is a useful method for comparing the contributions of coarse and fine particles to pollutant concentrations. 展开更多
关键词 Size distribution cascade impactor METALS Comarca Lagunera Mexico ICP-AES.
下载PDF
Particle removal by a single cavitation bubble 被引量:1
9
作者 XU Ming JI Chen +2 位作者 ZOU Jun RUAN XiaoDong FU Xin 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS 2014年第4期668-673,共6页
In the paper,the behavior of the particle acted by the oscillating bubble is studied using a high-speed video camera.The bubble is generated using a very low voltage of 55 V.Images are captured at a speed of 15000 fps... In the paper,the behavior of the particle acted by the oscillating bubble is studied using a high-speed video camera.The bubble is generated using a very low voltage of 55 V.Images are captured at a speed of 15000 fps(frames per second).It is found that the velocity of the particle is dependent on the liquid viscosity,particle size,and tube diameter.Particle velocity decreases with the increase of the glycron-water mixture viscosity.A model is presented to predict the velocity and verified by experimental results.These observations may be beneficial for the application in medical treatment. 展开更多
关键词 oscillating bubble particle removal viscosity influence
原文传递
Sediment Trapping from Hyperconcentrated Flow as Affected by Grass Filter Strips 被引量:1
10
作者 ZHOU Zheng-Chao GAN Zhuo-Ting SHANGGUAN Zhou-Ping 《Pedosphere》 SCIE CAS CSCD 2013年第3期372-375,共4页
To evaluate the effect of vegetative filter strips on sediment trapping, the spatial distribution of deposited sediment, and the size distribution of deposited particles from hyperconcentrated flows, a simulated grass... To evaluate the effect of vegetative filter strips on sediment trapping, the spatial distribution of deposited sediment, and the size distribution of deposited particles from hyperconcentrated flows, a simulated grass filter strip experiment was conducted with plastic grass using an adjustable slope steel flume. The simulated vegetation cover was 36%, and the inflow sediment concentrations applied were 147, 238, 320, and 429 kg m^(-3). The sediment concentration in the outflow, and the sediment particle size were determined. The results showed that the grass filter strips trapped most of the sediment from inflow at low sediment concentration. The deposition efficiency decreased with increasing sediment concentration, being 55.2% and 15.7% in the 147 and 429 kg m^(-3)sediment treatments, respectively. Most of the deposited sediments were distributed in the upper flume. In addition, the grass filter strips mainly trapped the coarse sediment (particle size>10 μm). 展开更多
关键词 EROSION Loess Plateau sediment particles vegetation cover
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部