This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for r...This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept＇s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.展开更多
This paper deals with various aspects of modeling, simulation, analysis, and control ofa SRG （switched reluctance generator） in different modes of operation. Excitation method of such a generator is shortly describe...This paper deals with various aspects of modeling, simulation, analysis, and control ofa SRG （switched reluctance generator） in different modes of operation. Excitation method of such a generator is shortly described. The output power of the SRG is controlled so that it can track the maximum output power of a wind turbine drive applications. Also, the output generator voltage is stabilized under either load or wind speed variations. Basic operational characteristics of a three-phase 6/4 SRG are developed through experimental observation. Meanwhile, the real-time operation was implemented in a DSP （digital signal processor） environment. The simulation of the complete system model has been obtained using the Matlab/Simulink software. A good agreement between experimental and simulation results has been observed which supports the validity of the proposed analysis.展开更多
基金Foundation item： Supported by the National Science Foundation （CMMI-1026264 and EEC-1157094）.
文摘This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept＇s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.
文摘This paper deals with various aspects of modeling, simulation, analysis, and control ofa SRG （switched reluctance generator） in different modes of operation. Excitation method of such a generator is shortly described. The output power of the SRG is controlled so that it can track the maximum output power of a wind turbine drive applications. Also, the output generator voltage is stabilized under either load or wind speed variations. Basic operational characteristics of a three-phase 6/4 SRG are developed through experimental observation. Meanwhile, the real-time operation was implemented in a DSP （digital signal processor） environment. The simulation of the complete system model has been obtained using the Matlab/Simulink software. A good agreement between experimental and simulation results has been observed which supports the validity of the proposed analysis.
