A laboratory experiment was undertaken in Soil Science Division of BRRI （Bangladesh Rice Research Institute） during 2010 to assess the quality of industrial effluents and city waste as a source of irrigation water f...A laboratory experiment was undertaken in Soil Science Division of BRRI （Bangladesh Rice Research Institute） during 2010 to assess the quality of industrial effluents and city waste as a source of irrigation water for agriculture. The treatments of the studies were the effluents of five different industrial sources like polyvinyl, dyeing, pharmaceuticals, beverage, tannery, mixed waste water （contaminated with effluents from many industries）, CWW （city waste water） and underground water as control. The industrial effluents, MWW （mixed waste water）, CWW and control water were tested for electrical conductivity, pH, and soluble ions such as Na^＋, Ca^2＋, Mg^2＋, K^＋, HCO3-, CO3^2-, NH4^＋-N and H2PO4^-. Micronutrients （Fe, Mn, Cu and Zn） and heavy metals （As, Pb, Cd, Cr and Ni） were analyzed from the samples. Beverage industry effluent showed acidic reaction, while the other industrial effluents showed alkaline reaction （pH 7.25-9.07）. Pharmaceutical, dyeing and tannery effluents showed EC of 3.40, 4.30 and 9.49 dS m^-1, respectively, compared to 0.54 dSm^-1 of the control. All the effluents except polyvinyl and beverage effluents and CWW recorded higher carbonate and bicarbonate content than that of control. Industrial effluents and CWW were higher in micronutrient content as compared to control. Dyeing, pharmaceutical and tannery effluents contained 2.51, 3.94 and 4.29 mg L^-1 lead, 0.15, 0.14 and 0.38 mg L^-1 chromium and 0.25, 0.24 and 0.16 mg L^-1 nickel, respectively which might be concemed for health hazard through food chain.展开更多
This paper briefly introduced the evolution of purification technology for drinking water over time. After description of the 1st generation processes in the beginning of the 20th century - conventional processes and ...This paper briefly introduced the evolution of purification technology for drinking water over time. After description of the 1st generation processes in the beginning of the 20th century - conventional processes and the 2nd generation processes in 1970s - advanced treatment processes, a tertiary processes - UF (ultrafiltration) based on integrated processes was proposed. Moreover, reaction measures (dosing variety of regents for different contaminants) for urban source water emergencies were illustrated in brief. A new technology of KMnO4 and potassium permanganate composite (PPC) for drinking water purification which was developed by Harbin Institute of Technology (HIT) was concisely introduced.展开更多
文摘A laboratory experiment was undertaken in Soil Science Division of BRRI （Bangladesh Rice Research Institute） during 2010 to assess the quality of industrial effluents and city waste as a source of irrigation water for agriculture. The treatments of the studies were the effluents of five different industrial sources like polyvinyl, dyeing, pharmaceuticals, beverage, tannery, mixed waste water （contaminated with effluents from many industries）, CWW （city waste water） and underground water as control. The industrial effluents, MWW （mixed waste water）, CWW and control water were tested for electrical conductivity, pH, and soluble ions such as Na^＋, Ca^2＋, Mg^2＋, K^＋, HCO3-, CO3^2-, NH4^＋-N and H2PO4^-. Micronutrients （Fe, Mn, Cu and Zn） and heavy metals （As, Pb, Cd, Cr and Ni） were analyzed from the samples. Beverage industry effluent showed acidic reaction, while the other industrial effluents showed alkaline reaction （pH 7.25-9.07）. Pharmaceutical, dyeing and tannery effluents showed EC of 3.40, 4.30 and 9.49 dS m^-1, respectively, compared to 0.54 dSm^-1 of the control. All the effluents except polyvinyl and beverage effluents and CWW recorded higher carbonate and bicarbonate content than that of control. Industrial effluents and CWW were higher in micronutrient content as compared to control. Dyeing, pharmaceutical and tannery effluents contained 2.51, 3.94 and 4.29 mg L^-1 lead, 0.15, 0.14 and 0.38 mg L^-1 chromium and 0.25, 0.24 and 0.16 mg L^-1 nickel, respectively which might be concemed for health hazard through food chain.
文摘This paper briefly introduced the evolution of purification technology for drinking water over time. After description of the 1st generation processes in the beginning of the 20th century - conventional processes and the 2nd generation processes in 1970s - advanced treatment processes, a tertiary processes - UF (ultrafiltration) based on integrated processes was proposed. Moreover, reaction measures (dosing variety of regents for different contaminants) for urban source water emergencies were illustrated in brief. A new technology of KMnO4 and potassium permanganate composite (PPC) for drinking water purification which was developed by Harbin Institute of Technology (HIT) was concisely introduced.
