汕头市饱水细粒土粘聚力分析

广东汕头市区广泛分布饱水细粒土包括淤泥和粘土。这些地基土,即便是同类土体,其物理力学性质亦有差别,而粘聚力的差别尤为显著。对于淤泥土,通常含水量超出液限,粘聚力主要受控于含水量与液限之差;对于粘土,含水量小于液限,但仍然处于饱和状态,粘聚力主要取决于液限与含水量之差。近百件土样试验结果表明:饱水粘性土的粘聚力是变量,而不是常量。

Constitutive Model of Saturated Soft Clay with Cyclic Loads under Unconsolidated Undrained Condition

An equivalent visco-elastic model of saturated soft clay was studied under unconsolidated undrained (UU) condition, which can be used to evaluate the stability of ocean foundation. Cyclic triaxial compression and extension tests were conducted to study the parameters of the model. Results showed that the relationships of the damping ratio and the octahedral shear modulus with the octahedral cyclic shear strain were nearly unique, when the initial octahedral shear stress ratios of specimens were equal to 0.3, 0.5 and 0.7. The relationships of the damping ratio and the octahedral shear modulus with the octahedral cyclic shear strain determined from the cyclic triaxial compression tests were basically the same as those determined from the cyclic triaxial extension tests. Furthermore, the relationships were not related to the initial stress condition, the test stress state and the octahedral cyclic shear stress ratio. The relationships determined from the cyclic triaxial tests under no deviatoric stress were basically the same as those determined from the cyclic triaxial tests under deviatoric stress. The change of the octahedral cyclic accumulative strain with the number of cycles was unique under different tests stress states. An equivalent visco-elastic constitutive model of saturated soft clay under UU condition was initially established.

Attenuation-type and failure-type curve models on accumulated pore water pressure in saturated normal consolidated clay

Based on dynamic triaxial test results of saturated soft clay, similarities of variations between accumulated pore water pressure and accumulated deformation were analyzed. The Parr＇s equation on accumulated deformation was modified to create an attenuation-type curve model on accumulated pore water pressure in saturated normal consolidation clay. In this model, dynamic strength was introduced and a new parameter called equivalent dynamic stress level was added. Besides, based on comparative analysis on variations between failure-type and attenuatiun-type curves, a failure-type curve model was created on accumulated pore water pressure in saturated normal consolidation clay. Two models can take cycle number, coupling of static and dynamic deviator stress, and consolidation way into consideration. The models are verified by test results. The correlation coefficients are more than 0.98 for optimization of test results based on the two models, and there is good agreement between the optimized and test curves, which shows that the two models are suitable to predict variations of accumulated pore water pressure under different loading cases and consolidation ways. In order to improve prediction accuracy, it is suggested that loading cases and consolidation ways should be consistent with in-situ conditions when dynamic triaxial tests are used to determine the constants in the models.