催化加氢还原芳香硝基化合物制备芳胺的技术进展

综述了催化加氢还原芳香硝基化合物制备芳胺及其衍生物的近况,讨论了影响催化加氢反应的主要因素和工艺条件,并展望了催化加氢法制备芳胺工艺的应用前景和发展方向。

Ni@Pd core-shell nanoparticles supported on a metal-organic framework as highly efficient catalysts for nitroarenes reduction

Ni@Pd core-shell nanoparticles with a mean particle size of 8–9 nm were prepared by solvothermal reduction of bivalent nickel and palladium in oleylamine and trioctylphosphine.Subsequently,the first-ever deposition of Ni@Pd core-shell nanoparticles having different compositions on a metal-organic framework（MIL-101）was accomplished by wet impregnation in n-hexane.The Ni@Pd/MIL-101 materials were characterized by powder X-ray diffraction,Fourier transform infrared spectroscopy,transmission electron microscopy,and energy-dispersive X-ray spectroscopy and also investigated as catalysts for the hydrogenation of nitrobenzene under mild reaction conditions.At 30 °C and 0.1 MPa of H2 pressure,the Ni@Pd/MIL-101 gives a TOF as high as 375 h–1 for the hydrogenation of nitrobenzene and is applicable to a wide range of substituted nitroarenes.The exceptional performance of this catalyst is believed to result from the significant Ni-Pd interaction in the core-shell structure,together with promotion of the conversions of aromatics by uncoordinated Lewis acidic Cr sites on the MIL-101 support.

Synergism of Pt nanoparticles and iron oxide support for chemoselective hydrogenation of nitroarenes under mild conditions

An efficient and low-cost supported Pt catalyst for hydrogenation of niroarenes was prepared with colloid Pt precursors andα-Fe2O3 as a support.The catalyst with Pt content as low as 0.2 wt%exhibits high activities,chemoselectivities and stability in the hydrogenation of nitrobenzene and a variety of niroarenes.The conversion of nitrobenzene can reach 3170 molconv h^–1 molPt^–1 under mild conditions(30°C,5 bar),which is much higher than that of commercial Pt/C catalyst and many reported catalysts under similar reaction conditions.The spatial separation of the active sites for H2 dissociation and hydrogenation should be responsible for the high chemoselectivity,which decreases the contact possibility between the reducible groups of nitroarenes and Pt nanoparticles.The unique surface properties ofα-Fe2O3 play an important role in the reaction process.It provides active sites for hydrogen spillover and reactant adsorption,and ultimately completes the hydrogenation of the nitro group on the catalyst surface.

Intermediate formation enabled regioselective access to amide in the Pd-catalyzed reductive aminocarbonylation of olefin with nitroarene

An efficient route for the palladium-catalyzed reductive aminocarbonylation of olefins with nitroarenes was developed using carbon monoxide(CO)as both reductant and carbonyl source,which enables facile access to amides with excellent regioselectivity and broad substrate scope.It is found that the counter anions of the Pd catalyst precursors significantly affect the reaction chemoselectivity and amide regioselectivity.Branched amides were mainly obtained with K2PdCl4 as the metal catalyst,and phosphine ligands had no influence on the regioselectivity but affected the catalytic reactivity.However,phosphine ligands had significant effects on aminocarbonylation regioselectivity when Pd(CH3CN)4(OTf)2 was used;monodentate phosphines tended to form branched amides,and bidentate phosphines mainly formed linear amides.Trapping experiments,primary kinetic studies,and control reactions with all possible N-species reduced from nitroarene indicated that the catalytic synthesis of branched and linear amides produced nitrene(further converted to enamide)and aniline,respectively,different from the previous ligand-controlled regioselective synthesis of amides via the aminocarbonylation of olefins with amines.Furthermore,the proposed synthesis route could be applied in the synthesis of gram-scale propanil under mild conditions.

Chemoselective transfer hydrogenation to nitroarenes mediated by oxygen-implanted MoS_2

We present an efficient approach for the chemoselective synthesis of arylamines from nitroarenes and formate over an oxygen-implanted MoS2 catalyst（O-MoS2）.O-MoS2 was prepared by incomplete sul idation and reduction of an ammonium molybdate precursor.A number of Mo-O bonds were implanted in the as-synthesized ultrathin O-MoS2 nanosheets.As a consequence of the different coordination geometries of O（Mo O2） and S（MoS2）,and lengths of the Mo-O and Mo-S bonds,the implanted Mo-O bonds induced obvious defects and more coordinatively unsaturated（CUS） Mo sites in O-MoS2,as confirmed by X-ray diffraction,Raman spectroscopy,X-ray photoelectron spectroscopy,high resolution transmission electron microscopy,and extended X-ray absorption fine structure characterization of various MoS2-based materials.O-MoS2 with abundant CUS Mo sites was found to efficiently catalyze the chemoselective reduction of nitroarenes to arylamines.

Biosynthesis of copper nanoparticles supported on manganese dioxide nanoparticles using Centella asiatica L. leaf extract for the efficient catalytic reduction of organic dyes and nitroarenes

In this study we designed a novel,cost‐efficient and green method for the synthesis of copper nanoparticles(Cu NPs)supported on manganese dioxide(MnO2)NPs,using Centella asiatica L.leaf extract as a naturally‐sourced reducing agent,without stabilizers or surfactants.This synthetic process is environmentally‐friendly and avoids the use of toxic reducing agents.Phenolic hydroxyl groups in the leaf extract are believed to reduce Cu2+in solution to generate Cu NPs that are subsequently stabilized on the MnO2NP surfaces.The resulting Cu/MnO2nanocomposite was fully characterized using X‐ray diffraction,transmission electron microscopy,field emission scanning electron microscopy,energy‐dispersive X‐ray spectroscopy and Fourier transform infrared spectroscopy.This material was found to function as a highly active,efficient and recyclable heterogeneous catalyst for the reduction of Congo red,rhodamine B and methylene blue as well as nitro compounds such as2,4‐dinitrophenylhydrazine and4‐nitrophenol in the presence of NaBH4in aqueous media at ambient temperature.The high stability of the Cu/MnO2nanocomposite also allows the catalyst to be separated and reused several times without any significant loss of activity.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.

Catalytic Hydrogenation of Aromatic Compounds in the Liquid Phase

Peculiarities of a liquid phase hydrogenation, namely lower diffusivity of components influencing the reaction rate and deactivation of catalysts by leaching, are discussed. A focus is on hydrogenation of aromatic compounds, whereas the following processes are evaluated： （l） partial hydrogenation of benzene to cyclohexene; （2） hydrogenation of aniline; （3） hydrogenation of diphenylamine; （4） preparation of aniline from nitrobenzene; （5） hydrogenation of chloronitrobenzenes; （6） hydrogenation of 4-nitrosodiphenylamine and 4-nitrodiphenylamine mixture. Processes （1） and （6） are typically carried out in the water-oil system. Generally, this type of system allows reaching a higher selectivity to desired products. In the case of hydrogenation of 4-nitrosodiphenylamine and 4-nitrodiphenylamine mixture, the water phase extracts a water soluble catalyst; which is recycled and used for condensation of aniline and nitrobenzene. Problems of reaction kinetics, as well as catalysts deactivation are here discussed.

Cobalt single atoms anchored on N-doped ultrathin carbon nanosheets for selective transfer hydrogenation of nitroarenes

Selective transfer hydrogenation of nitroarenes to amines with transition metal nanocatalysts is appealing due to its low-cost, moderate reaction conditions, good activity and excellent selectivity. Single-atom catalysts (SACs) possessing advantages of maximum atom efficiency and particular electronic structure are expected to be more effective for this reaction, yet no report about it. Herein, cobalt single atoms anchored on N-doped ultrathin carbon nanosheets (denoted as CoSAs/NCNS) were produced and demonstrated as an outstanding SAC for selective transfer hydrogenation of nitroarenes to amines with formic acid as hydrogen donor. The turnover frequency (TOF) reached 110.6 h^-1, which was 20 times higher than the best results of cobalt nanopartides reported in literatures under similar reaction conditions. Moreover, CoSAs/NCNS exhibited excellent selectivity for a variety of nitroarenes bearing other reducible functionalities, such as iodo, cyano, keto, vinyl, alkynyl and ester groups. The findings further highlight the ability and advantages of SACs in heterogeneous catalysis.

Surface modification of Ti O2 nanosheets with fullerene and zinc-phthalocyanine for enhanced photocatalytic reduction under solar-light irradiation

High-efficiency photocatalysts are of great importance to satisfy the requirements of green chemistry nowadays.Here we reported a novel solar-driven photocatalyst fabricated by a facile surface modification method,with the two-dimensional carboxylated zinc phthalocyanine-carboxylated C60-titanium dioxide(Zn Pc-C3-Ti O2)nanosheets,in which the surface modifications of Zn Pc and C60derivative were designed to extend the absorption range and promote charge separation,respectively.Benefiting from the unique structure and positive synergetic effect,the Zn Pc-C3-Ti O2 nanocomposite shows promising applications in selective reduction of nitroarenes for high-value-added aromatic amines under solar light.Especially,for the photocatalytic reduction of nitrobenzene to aniline,the Zn Pc-C3-Ti O2 nanocomposite possesses both high efficiency and selectivity(up to 99%).

Surface plasmon-enhanced photochemical reactions on noble metal nanostructures

Nanoscale noble metals can exhibit excellent photochemical and photophysical properties, due to surface plasmon resonance(SPR) from specifically collective electronic excitations on these metal surfaces. The SPR effect triggers many new surface processes, including radiation and radiationless relaxations. As for the radiation process, the SPR effect causes the significant focus of light and enormous enhancement of the local surface optical electric field, as observed in surface-enhanced Raman spectroscopy(SERS) with very high detection sensitivity(to the single-molecule level). SERS is used to identify surface species and characterize molecular structures and chemical reactions. For the radiationless process, the SPR effect can generate hot carriers, such as hot electrons and hot holes, which can induce and enhance surface chemical reactions. Here, we review our recent work and related literature on surface catalytic-coupling reactions of aromatic amines and aromatic nitro compounds on nanostructured noble metal surfaces. Such reactions are a type of novel surface plasmon-enhanced chemical reaction. They could be simultaneously characterized by SERS when the SERS signals are assigned. By combining the density functional theory(DFT) calculations and SERS experimental spectra, our results indicate the possible pathways of the surface plasmonenhanced photochemical reactions on nanostructures of noble metals. To construct a stable and sustainable system in the conversion process of the light energy to the chemical energy on nanoscale metal surfaces, it is necessary to simultaneously consider the hot electrons and the hot holes as a whole chemical reaction system.