NUMERICAL SIMULATION OF UNSTEADY-STATE UNDEREXPANDED JET USING DISCONTINUOUS GALERKIN FINITE ELEMENT METHOD

A discontinuous Galerkin finite element method （DG-FEM） is developed for solving the axisymmetric Euler equations based on two-dimensional conservation laws. The method is used to simulate the unsteady-state underexpanded axisymmetric jet. Several flow property distributions along the jet axis, including density, pres- sure and Mach number are obtained and the qualitative flowfield structures of interest are well captured using the proposed method, including shock waves, slipstreams, traveling vortex ring and multiple Mach disks. Two Mach disk locations agree well with computational and experimental measurement results. It indicates that the method is robust and efficient for solving the unsteady-state underexpanded axisymmetric jet.

Effects of solution-aging treatment on microstructures and properties of Ti-55.06%Ni-0.3%Cr alloy

The effects of solution-aging treatment on the microstructures, mechanical properties and internal friction of Ti- 55.06%Ni-0.3%Cr （mole fraction） alloy were investigated by means of tensile test, dynamic mechanical analysis （DMA） and spherical aberration electron microscopy （SAEM）. The results show that the aged alloys with Cr3Ni2 phase always exhibit higher tensile strength and hardness than those of solution-treated alloy without Cr3Ni2 phase, and the aging peak temperature presents at 375 ℃. It is also found that the internal friction peak （tan 6） value decreases with increasing the frequency. There are two internal friction peaks corresponding to the B2（austenite）→R and R→M（martensite） transformations upon cooling, but only one corresponding to the reverse M→B2 transformation upon heating in both solution-treated and 375 ℃-aged alloys, due to the superposition of Mand R phase transformation. Besides, the position of internal friction peaks in the alloy after aging at 375 ℃ shifts to higher temperature. This is attributed to the decrease of Cr and Ni content, and the decline of lattice deformation and transformation resistance, all of which are related to the precipitation of Cr3Ni2 phase in the solution-aged alloys.

Microstructural,mechanical and shape memory characterizations of Ti-Mo-Sn alloys

As a β stabilizing element in Ti-based alloys,the effect of Mo on phase constitution,microstructure,mechanical and shape memory properties was investigated.Different compositions of Ti-xMo-3Sn alloys(where x=2,4,6,at.%) were prepared by arc melting.A binary composition of Ti-6 Mo alloy was also prepared for comparison.Ti-xMo-3Sn alloys show low hardness and high ductility with 90% reduction in thickness while Ti-6 Mo alloy shows high hardness,brittle behavior,and poor ductility.Field emission scanning electron microscopy(FESEM) reveals round morphology of athermal ω(ωath) precipitates.The presence of ωath phase is also confirmed by X-ray diffraction(XRD)in both as-cast and solution-treated and quenched conditions.The optical microscopy(OM) and FESEM show that the amount of martensite forming during quenching decreases with an increase in Mo content,which is also due to β→ω transformation.The hardness trends reinforce the presence of ωath too.The shape memory effect(SME) of 9% is the highest for Ti-6 Mo-3Sn alloy.The SME is trivial due to ωath phase formation;however,the increase in SME is observed with an increase in Mo content,which is due to the reverse transformation from ωath and the stress-induced martensitic transformation.In addition,a new and very simple method was designed and used for shape memory effect measurement.

Microstructure, martensitic transformation and mechanical properties of Ni-Mn-Sn alloys by substituting Fe for Ni

The effects of partial substitution of Fe element for Ni element on the structure,martensitic transformation and mechanicalproperties of Ni50-xFexMn38Sn12(x=0and3%,molar fraction)ferromagnetic shape memory alloys were investigated.Experimentalresults indicate that by substitution of Fe for Ni,the microstructure and crystal structure of the alloys change at room temperature.Compared with Ni50Mn38Sn12alloy,the martensitic transformation starting temperature of Ni47Fe3Mn38Sn12alloy is decreased by32.5K.It is also found that martensitic transformation occurs over a broad temperature window from288.9to352.2K.It is found that themechanical properties of Ni-Mn-Sn alloy can be significantly improved by Fe addition.The Ni47Fe3Mn38Sn12alloy achieves amaximum compressive strength of855MPa with a fracture strain of11%.Moreover,the mechanism of the mechanical propertyimprovement is clarified.Fe doping changes the fracture type from intergranular fracture of Ni50Mn38Sn12alloy to transgranularcleavage fracture of Ni47Fe3Mn38Sn12alloys.

SPATIAL-TEMPORAL DYNAMICS OF REGIONAL CONVERGENCE AT COUNTY LEVEL IN JIANGSU

The dynamics of regional convergence include spatial and temporal dimensions. Spatial Markov chain can be used to explore how regions evolve by considering both individual regions and their geographic neighbors. Based on per capita GDP data set of 77 counties from 1978 to 2000, this paper attempts to investigate the spatial-temporal dynamics of regional convergence in Jiangsu. First, traditional Markov matrix for five per capita GDP classes is constructed for later comparison. Moreover, each region’s spatial lag is derived by averaging all its neighbors’ per capita GDP data. Conditioning on per capita GDP class of its spatial lag at the beginning of each year, spatial Markov transition probabilities of each region are calculated accordingly. Quantitatively, for a poor region, the probability of moving upward is 3.3% if it is surrounded by its poor neighbors, and even increases to 18.4% if it is surrounded by its rich neighbors, but it goes down to 6.2% on average if ignoring regional context. For a rich region, the probability of moving down ward is 1.2% if it is surrounded by its rich neighbors, but increases to 3.0% if it is surrounded by its poor neighbors, and averages 1.5% irrespective of regional context. Spatial analysis of regional GDP class transitions indicates those 10 upward moves of both regions and their neighbors are unexceptionally located in the southern Jiangsu, while downward moves of regions or their neighbors are almost in the northern Jiangsu. These empirical results provide a spatial explanation to the "convergence clubs" detected by traditional Markov chain.

Expression changes of hippocampal energy metabolism enzymes contribute to behavioural abnormalities during chronic morphine treatment

Dependence and impairment of learning and memory are two well-established features caused by abused drugs such as opioids. The hippocampus is an important region associated with both drug dependence and learning and memory. However, the molecular events in hippocampus following exposure to abused drugs such as opioids are not well understood. Here we examined the effect of chronic morphine treatment on hippocampal protein expression by proteomic analyses. We found that chronic exposure of mice to morphine for 10 days produced robust morphine withdrawal jumping and memory impairment, and also resulted in a significant downregulation of hippocampal protein levels of three metabolic enzymes, including Fe-S protein 1 ofNADH dehydrogenase, dihydrolipoamide acetyltransferase or E2 component of the pyruvate dehydrogenase complex and lactate dehydrogenase 2. Further real-time quantitative PCR analyses confirmed that the levels of the corresponding mRNAs were also remarkably reduced. Consistent with these findings, lower ATP levels and an impaired ability to convert glucose into ATP were also observed in the hippocampus of chronically treated mice. Opioid antagonist naltrexone administrated concomitantly with morphine significantly suppressed morphine withdrawal jumping and reversed the downregulation of these proteins. Acute exposure to morphine also produced robust morphine withdrawal jumping and significant memory impairment, but failed to decrease the expression of these three proteins. Intrahippocampal injection of D-glucose before morphine administration significantly enhanced ATP levels and suppressed morphine withdrawal jumping and memory impairment in acute morphine-treated but not in chronic morphine-treated mice. Intraperitoneal injection of high dose of D-glucose shows a similar effect on morphine-induced withdrawal jumping as the central treatment. Taken together, our results suggest that reduced expression of the three metabolic enzymes in the hippocampus as a result of chronic morphine treatment contributes to the development of drug-induced symptoms such as morphine withdrawal jumping and memory impairment.

Microstructures and mechanical properties of a martensitic steel welded with flux-cored wires

This study was focused on wear-resistant material prepared by CO2 GMAW method to basically determine the alloys and hardfacing technology which could be employed into mining equipment. Three flux-cored wires with different chemical compositions, marked by DM-I, DM-II and DM-III were used in welding a martensitic steel for the comparison of the microstructures and mechanical properties of the welding metals and HAZ. The results show that DM-I weld metal contains martensite plus other reinforced phases, while both DM-II and DM-III alloys lead to mainly martensitic microstructures with little precipitates. Among all of the tested materials the DM-I alloy has the highest hardness and wear resistance but the lowest impact toughness among the experimental weld metals. Meanwhile, the hardness, impact toughness and wear resistance of the DM-II and DM-III alloys are close to those of the base metal but the DM-III is not as strong as DM-II. Dimples can be found on the impact fracture of the weld metals, but the steel fracture consists of both cleavage and dimples. Thus HAZ has less risk for cracking than the welds, and the DM-II wire which produces the weld having identical mechanical properties to the base metal is suitable for further application.

Evolutionary Game Dynamics in a Fitness-Dependent Wright-Fisher Process with Noise

Evolutionary game dynamics in finite size populations can be described by a fitness-dependent Wright- Fisher process. We consider symmetric 2×2 games in a well-mixed population. In our model, two parameters to describe the level of player＇s rationality and noise intensity in environment are introduced. In contrast with the fixation probability method that used in a noiseless case, the introducing of the noise intensity parameter makes the process an ergodic Markov process and based on the limit distribution of the process, we can analysis the evolutionary stable strategy （ESS） of the games. We illustrate the effects of the two parameters on the ESS of games using the Prisoner＇s dilemma games （PDG） and the snowdrift games （SG）. We also compare the ESS of our model with that of the replicator dynamics in infinite size populations. The results are determined by simulation experiments.

The influence of physiobiomechanical parameters,technical aspects of shooting,and psychophysiological factors on biathlon performance:A review

The biathlon, an Olympic sporting discipline that combines cross-country skiing with rifle marksmanship, entails considerable physiological demands, as well as fine motor control while shooting after intense exercise and under mental pressure. Although much of our knowledge about cross-country skiing is probably also applicable to the biathlon, carrying the rifle and shooting under stress make this discipline somewhat unique. The present review summarizes and examines the scientific literature related to biathlon performance, with a focus on physiological and biomechanical factors and shooting technique, as well as psychophysiological aspects of shooting performance. We conclude with suggestions for future research designed to extend our knowledge about the biathlon, which is presently quite limited.2018 Published by Elsevier B.V. on behalf of Shanghai University of Sport. This is an open access article under the CC BY-NC-ND license. （http：//creativecommons.org/licenses/by-nc-nd/4.0/）.

Low-speed instability analysis for hydraulic motor based on nonlinear dynamics

A nonlinear dynamics model and a mathematical expression were set up to investigatethe mechanism and conditions of vibration creep acceleration.The model showsthat hydraulic spring and nonlinear friction are major factors that can affect low-speed instability.The mathematic model was established to obtain the change rule of speed andinstantaneous acceleration of the hydraulic motor.Then, Matlab was used to simulate theeffect of nonlinear friction force and hydraulic motor parameters such as coefficient of leakand compression ratio, etc., under low speed.Finally, some measures were proposed toimprove the low-speed stability of the hydraulic motor.

Kinetic study of alkaline protease 894 for the hydrolysis of the pearl oyster Pinctada martensii

A new enzyme (alkaline protease 894) obtained from the marine extremophile Flavobacterium yellowsea (YS-80-122) has exhibited strong substrate-binding and catalytic activity, even at low temperature, but the characteristics of the hydrolysis with this enzyme are still unclear. The pearl oyster Pinctada martensii was used in this study as the raw material to illustrate the kinetic properties of protease 894. After investigating the intrinsic relationship between the degree of hydrolysis and several factors, including initial reaction pH, temperature, substrate concentration, enzyme concentration, and hydrolysis time, the kinetics model was established. This study showed that the optimal conditions for the enzymatic hydrolysis were an initial reaction pH of 5.0, temperature of 30°C, substrate concentration of 10% (w/v), enzyme concentration of 2 500 U/g, and hydrolysis time of 160 min. The kinetic characteristics of the protease for the hydrolysis of P. martensii were obtained. The inactivation constant was found to be 15.16/min, and the average relative error between the derived kinetics model and the actual measurement was only 3.04%, which indicated a high degree of fitness. Therefore, this study provides a basis for the investigation of the concrete kinetic characteristics of the new protease, which has potential applications in the food industry.

A novel contour design technique of super/hypersonic nozzle diverging section with sharing throat

A straightforward technique has been developed to quickly determine the wall contour of super/hypersonic nozzles working at multiply Mach number which share a common throat section.Mach number distribution along the centerline of the nozzle is specified in advance and divided into two sections,both of which are described by the b-spline function.The first section is shared by different exit Mach number nozzles.The nozzle contour is determined by the method of characteristics plus boundary layer correction.An example of this design method is employed to illustrate the technique with a computational fluid dynamics calculation.The simulation results indicate that desired Mach numbers are obtained at the nozzle exit,and the good flow quality is attained for different nozzles within δMa/Ma<±0.56% in the flow core region.This technique improves the design precision of the converging-diverging nozzle,cancels waves completely,and achieves nozzles with multiple Mach number exiting which share a common throat section.

Preliminary Experiences in Pheromone Trap Monitoring of Zeuzera pyrina （L.） in Syrian Apple Orchards

The leopard moth （Zeuzera pyrina L）, is a cossid whose larvae bore into twigs, branches and trunks of various woody species, weakening and killing trees or shrubs. Recently it caused serious losses of apple trees in Syria. The flight dynamics of Z. pyrina was monitored by pheromone traps （first time in Syria） compared to light trap device. This study was carried out in Damascus countryside, Qunaytirah and Sweida provinces during 2007-2008. Results indicated that the flight of moths during 2007 started in early June in Damascus countryside and Sweida provinces. The highest number of caught adults （the highest peak） was concentrated in mid July in Sweida province, whereas in Damascus countryside province there were a high peak in mid June and a small peak in early July. On the other hand, flight of moths during 2008 started in mid-May in Damascus countryside province while in Qunaytirah province started in early June. The highest number of caught adults （the highest peak） was concentrated in late July in Damascus countryside, whereas in Qunaytirah province there were small peaks in mid June and mid July. Experiments conducted to evaluate capturing efficiency of different types of traps （pheromone traps and light trap） demonstrated that there was significantly high difference within the trap devices, wherein Capta trap got the best results and caught more males than the others.

Acute toxicity effects of perfluorooctane sulfonate on sperm vitality,kinematics and fertilization success in zebrafish

Perfluorooctane sulfonate （PFOS） has emerged as one of the most concerning contaminants in recent years. This study aimed to investigate the acute toxicity effect of PFOS on sperm viability, kinematics and fertilization success in zebrafish （Danio rerio）. Sperm were activated in aqueous media containing a range of PFOS concentrations （0, 0.09, 0.9 and 9 mg/L）. Viabilities and kinematics of the sperm exposed to different PFOS treatments were assessed via computer-assisted sperm analysis （CASA） at 20, 40, 60, and 80 s after activation. PFOS exposure decreased the percentage of motile sperm, the curvilinear velocity （VCL）, and the mean angular displacement （MAD） of spermatozoa, but showed no influence on the straight- line velocity （VSL） or the angular path velocity （VAP）. Furthermore, a significant decrease in fertilization success was observed in spermatozoa that were exposed to 0.9 mg/L PFOS or more. These findings indicate that PFOS pollution in natural aquatic environment may be a potential threaten to successful reproduction of fish.

Shell Model for Elastic and Thermodynamic Properties of Gallium Nitride with Hexagonal Wurtzite Structure

Shell model molecular dynamic simulation with interatomic pair potential is utilized to investigate the elastic and thermodynamic properties of gallium nitride with hexagonal wurtzite structure （w-GaN） at high pressure. The calculated elastic constants Cij at zero pressure and 300 K agree well with the experimental data and other calculated values. Meanwhile, the dependences of the relative volume V/Vo, elastic constants Cij, entropy S, enthalpy H, and heat capacities Cv and Up on pressure are successfully obtained. From the elastic constants obtained, we also calculate the shear modulus G, bulk modulus B, Young＇s modulus E, Poisson＇s ratio v, Debye temperature ΘD, and shear anisotropic factor Ashear on pressures.

Management of the Innovation Process of a Small Amazonian Company in the Food Sector

The present article broaches aspects related to the management of the innovation process of a small company that works in the food industry of Manaus; the authors focus on the current types and levels of technological competencies existent in the company, describe their technological learning process and emphasize the innovation system that provides the organizational development support. This paper is based on a specific individual study and on empirical evidence collected using various techniques. It demonstrates how the management of the technological learning process and the innovation system boost the growth trajectory in a small company, by the fact that they contribute to the effective development of technological competencies considered fundamental to perfect the level of competitiveness of the company.

Design of a continuously variable Mach-number nozzle

A design method was developed to specify the profile of the continuously variable Mach-number nozzle for the supersonic wind tunnel. The controllable contour design technique was applied to obtaining the original nozzle profile, while other Machnumbers were derived from the transformation of the original profile. A design scheme, covering a Mach-number range of3.0<Ma<4.0, was shown to illustrate the present design technique. To fully validate the present design method, computational fluid dynamics(CFD) analyses were carried out to study the flow quality in the test area of the nozzle. The computed results indicate that exit uniform flow is obtained with 1.19% of the maximal Mach-number deviation at the nozzle exit. The present design method achieves the continuously variable Mach-number flow during a wind tunnel running.

Study on Measuring Device for Bearing Clearance of Hemisphere Dynamic Pressure Motor

The clearance of the hemisphere dynamic pressure motor is small and difficult to measure, the measurement method of micro clearance is studied. The shortcomings of the original measurement method are analyzed, and a clearance measuring device for the hemisphere dynamic pressure motor is designed, which improves the measurement efficiency and stability.

Clustering Algorithms to Analyze Molecular Dynamics Simulation Trajectories for Complex Chemical and Biological Systems

Molecular dynamics （MD） simulation has become a powerful tool to investigate the structure- function relationship of proteins and other biological macromolecules at atomic resolution and biologically relevant timescales. MD simulations often produce massive datasets con- taining millions of snapshots describing proteins in motion. Therefore, clustering algorithms have been in high demand to be developed and applied to classify these MD snapshots and gain biological insights. There mainly exist two categories of clustering algorithms that aim to group protein conformations into clusters based on the similarity of their shape （geometric clustering） and kinetics （kinetic clustering）. In this paper, we review a series of frequently used clustering algorithms applied in MD simulations, including divisive algorithms, ag- glomerative algorithms （single-linkage, complete-linkage, average-linkage, centroid-linkage and ward-linkage）, center-based algorithms （K-Means, K-Medoids, K-Centers, and APM）, density-based algorithms （neighbor-based, DBSCAN, density-peaks, and Robust-DB）, and spectral-based algorithms （PCCA and PCCA＋）. In particular, differences between geomet- ric and kinetic clustering metrics will be discussed along with the performances of diflhrent clustering algorithms. We note that there does not exist a one-size-fits-all algorithm in the classification of MD datasets. For a specific application, the right choice of clustering algo- rithm should be based on the purpose of clustering, and the intrinsic properties of the MD conformational ensembles. Therefore, a main focus of our review is to describe the merits and limitations of each clustering algorithm. We expect that this review would be helpful to guide researchers to choose appropriate clustering algorithms for their own MD datasets.

Dynamics of Quantum Discord in Asymmetric and Local Non-Markovian Environments

The non-Markovian decoherence of quantum and classical correlations is analytically obtained when two qubits are asymmetrically subjected to the bit flip channel and phase flip channel. For one class of initial mixed states, quantum correlations quantified by quantum discord decay synchronously with classical correlations. The discovery that the decaying rates of quantum and classical correlations suddenly change at the characteristic time is physically interpreted by the distance from quantum state to the closest classical states. In a large time interval, quantum correlations are greater than classical correlations. The quantum and classical correlations can be preserved over a longer period of time via the kernel characterizing the environment memory effects.