A three degree-of-freedom (DOF) planar changeable parallel mechanism is designed by means of control of different drive parameters. This mechanism possesses the characteristics of two kinds of parallel mechanism. Base...A three degree-of-freedom (DOF) planar changeable parallel mechanism is designed by means of control of different drive parameters. This mechanism possesses the characteristics of two kinds of parallel mechanism. Based on its topologic structure, a coordinate system for position analysis is set-up and the forward kinematic solutions are analyzed. It was found that the parallel mechanism is partially decoupled. The relationship between original errors and position-stance error of moving platform is built according to the complete differential-coefficient theory. Then we present a special example with theory values and errors to evaluate the error model, and numerical error solutions are gained. The investigations concentrating on mechanism errors and actuator errors show that the mechanism errors have more influences on the position-stance of the moving platform. It is demonstrated that improving manufacturing and assembly techniques can greatly reduce the moving platform error. The small change in position-stance error in different kinematic positions proves that the error-compensation of software can improve considerably the precision of parallel mechanism.展开更多
To investigate the feasibility and effectiveness of the designed control system used for driving and steering of an electric scooter, a model of differential steering was developed. The function of electronic differen...To investigate the feasibility and effectiveness of the designed control system used for driving and steering of an electric scooter, a model of differential steering was developed. The function of electronic differential steering was realized by controlling the speed of right or left wheel and the corresponding speed difference. The control system was simulated with MATLAB/SIMUL1NK and ADAMS. It is found that the motor load torque is proportional to the tire vertical force, so the adhesive capacity is met. The electric scooter can operate stably on the slope road at a speed of more than 1.5 m/s and turn stably at yawing velocities of 10° and 90°per second.展开更多
The mathematical model of the modem induction traction motor （TRIM and cutting magnetic circuit traction motor）, supplied with IPM inverter with different control technique is presented in the paper. In electric and...The mathematical model of the modem induction traction motor （TRIM and cutting magnetic circuit traction motor）, supplied with IPM inverter with different control technique is presented in the paper. In electric and hybrid vehicle are applied： FLMC （Fuzzy Logic Mode Control）, SLMC （Sliding Mode Control）, NRMC （Neural Regulator Control）, and Direct Power and Torque Control for Space Vector Modulated inverter （DPTC SVM）. In the special solution of the electric and hybrid vehicle are also applied a Random Switching Frequency Modulation. The control of hybrid vehicle should assure the realization of established transport-assignments in the definite time, at the optimum of energy consumption. One can this realize using. The multi criteria control system. Some results of the computer simulations are presented in the paper. Results of numerical calculation were verified for laboratory model of the electric and hybrid wheel vehicles traction motor.展开更多
The control of nuclear fuel manipulator crane （MC） drive system is essential for its running and other systems are designed surrounding the drive system.This paper gives a brief introduction to the composition and f...The control of nuclear fuel manipulator crane （MC） drive system is essential for its running and other systems are designed surrounding the drive system.This paper gives a brief introduction to the composition and function of MC,analyses its drive mode and control method and applies PLC to control its frequency transducer directly to help the motor work more stable.Based on the control requirements of bridge,trolley,Hoist,the control system of bridge applies a drive mode with 2-drag2 drive model on both sides and a multi-control method to realize simultaneous runningof two sides,1-drag-1 model on through-going axes and closed loop control method finish the precise location of trolley,and the using of 1-drag-1 model drive mode and closed loop control method solves the protect control difficulty of hoist which stops/starts repeatedly and changes speed.展开更多
This paper presents the technical survey and the trend analysis of the driver support technologies such as a pre-crush braking system in Japan. In the first part, Vehicle Intelligence to assist drivers is defined by t...This paper presents the technical survey and the trend analysis of the driver support technologies such as a pre-crush braking system in Japan. In the first part, Vehicle Intelligence to assist drivers is defined by two objective functions which are both TGA （Target Generation Agent） and TAA （Target Accomplishment Agent）. TAA is mainly based on the conventional technologies that are braking smoothly, or driving with lower fuel consumption. On the other hand, TGA has the intelligent function instead of human drivers. The actual TGA are explained using some concrete driver support systems. After that, Japanese market introduction date and evolution of driver support systems are discussed with clarifying cognitive aspects which are the perception support, the judgment support and the execution support. And Key technologies underlying evolution of driver support systems are explained. Finally the author concludes that the knowledge and insights needed for intelligent driver support systems will be much more complex than in the case of autonomous vehicles that drive themselves.展开更多
Induction motor is used in many applications to drive an electromechanical system. Transients of the motor torque and speed are outlined by the inertia of rotating rotor. The paper deals with influence of rotor inerti...Induction motor is used in many applications to drive an electromechanical system. Transients of the motor torque and speed are outlined by the inertia of rotating rotor. The paper deals with influence of rotor inertia to transients of motor speed. The method of speed control measurement and experimental equipment is discussed. Simulation and experimental results are compared.展开更多
基金Preject 50225519 supported by the National Outstanding Youth Science Foundation of China
文摘A three degree-of-freedom (DOF) planar changeable parallel mechanism is designed by means of control of different drive parameters. This mechanism possesses the characteristics of two kinds of parallel mechanism. Based on its topologic structure, a coordinate system for position analysis is set-up and the forward kinematic solutions are analyzed. It was found that the parallel mechanism is partially decoupled. The relationship between original errors and position-stance error of moving platform is built according to the complete differential-coefficient theory. Then we present a special example with theory values and errors to evaluate the error model, and numerical error solutions are gained. The investigations concentrating on mechanism errors and actuator errors show that the mechanism errors have more influences on the position-stance of the moving platform. It is demonstrated that improving manufacturing and assembly techniques can greatly reduce the moving platform error. The small change in position-stance error in different kinematic positions proves that the error-compensation of software can improve considerably the precision of parallel mechanism.
基金Supported by Scientific and Technological Project of Chongqing (CSTC2009AC6051)
文摘To investigate the feasibility and effectiveness of the designed control system used for driving and steering of an electric scooter, a model of differential steering was developed. The function of electronic differential steering was realized by controlling the speed of right or left wheel and the corresponding speed difference. The control system was simulated with MATLAB/SIMUL1NK and ADAMS. It is found that the motor load torque is proportional to the tire vertical force, so the adhesive capacity is met. The electric scooter can operate stably on the slope road at a speed of more than 1.5 m/s and turn stably at yawing velocities of 10° and 90°per second.
文摘The mathematical model of the modem induction traction motor （TRIM and cutting magnetic circuit traction motor）, supplied with IPM inverter with different control technique is presented in the paper. In electric and hybrid vehicle are applied： FLMC （Fuzzy Logic Mode Control）, SLMC （Sliding Mode Control）, NRMC （Neural Regulator Control）, and Direct Power and Torque Control for Space Vector Modulated inverter （DPTC SVM）. In the special solution of the electric and hybrid vehicle are also applied a Random Switching Frequency Modulation. The control of hybrid vehicle should assure the realization of established transport-assignments in the definite time, at the optimum of energy consumption. One can this realize using. The multi criteria control system. Some results of the computer simulations are presented in the paper. Results of numerical calculation were verified for laboratory model of the electric and hybrid wheel vehicles traction motor.
基金Supported by the National High Technology Research and Development Program of China(No.SQ2010AA0401265006)
文摘The control of nuclear fuel manipulator crane （MC） drive system is essential for its running and other systems are designed surrounding the drive system.This paper gives a brief introduction to the composition and function of MC,analyses its drive mode and control method and applies PLC to control its frequency transducer directly to help the motor work more stable.Based on the control requirements of bridge,trolley,Hoist,the control system of bridge applies a drive mode with 2-drag2 drive model on both sides and a multi-control method to realize simultaneous runningof two sides,1-drag-1 model on through-going axes and closed loop control method finish the precise location of trolley,and the using of 1-drag-1 model drive mode and closed loop control method solves the protect control difficulty of hoist which stops/starts repeatedly and changes speed.
文摘This paper presents the technical survey and the trend analysis of the driver support technologies such as a pre-crush braking system in Japan. In the first part, Vehicle Intelligence to assist drivers is defined by two objective functions which are both TGA （Target Generation Agent） and TAA （Target Accomplishment Agent）. TAA is mainly based on the conventional technologies that are braking smoothly, or driving with lower fuel consumption. On the other hand, TGA has the intelligent function instead of human drivers. The actual TGA are explained using some concrete driver support systems. After that, Japanese market introduction date and evolution of driver support systems are discussed with clarifying cognitive aspects which are the perception support, the judgment support and the execution support. And Key technologies underlying evolution of driver support systems are explained. Finally the author concludes that the knowledge and insights needed for intelligent driver support systems will be much more complex than in the case of autonomous vehicles that drive themselves.
文摘Induction motor is used in many applications to drive an electromechanical system. Transients of the motor torque and speed are outlined by the inertia of rotating rotor. The paper deals with influence of rotor inertia to transients of motor speed. The method of speed control measurement and experimental equipment is discussed. Simulation and experimental results are compared.
