The order-of-addition experiments are widely used in many fields,including food and industrial production,but the relative research under prior constraints is limited.The purpose of this paper is to select an optimal ...The order-of-addition experiments are widely used in many fields,including food and industrial production,but the relative research under prior constraints is limited.The purpose of this paper is to select an optimal sequence under the restriction that component i is added before component j,while it is unachievable to compare all sequences when the number of components m is large.To achieve this,a constrained PWO model is first provided,and then the D-optimal designs for order-of addition experiments with minimal-points via the modified threshold accepting algorithm is established.The effectiveness of the proposed method is demonstrated through a job scheduling problem with a prior constraint for teaching cases.展开更多
[Objective] The aim was to provide scientific basis for development and utilization of Pinus elliottii Engelm resources.[Method] The extraction process of shikimic acid in Pinus elliottii Engelm was studied,and the co...[Objective] The aim was to provide scientific basis for development and utilization of Pinus elliottii Engelm resources.[Method] The extraction process of shikimic acid in Pinus elliottii Engelm was studied,and the content of shikimic acid was determined by HPLC.The HPLC conditions were as follows;Alltima NH2 （5 μm,4.6 mm × 150 mm） column separation;the mobile phase was acetonitrile-2%H3PO4 （90：10）;the flowing velocity was 1 ml/min;test wavelength was 213 nm,the width of belt was 16 nm;reference wavelength was 300 nm,the width of belt was 80 nm.[Result] By the single factor and orthogonal tests,the optimum conditions were found as follows：ethanol concentration 60%,extraction temperature 75 ℃,solid-liquid ratio 1：25,extraction time 2.5 h.The extraction rate of shikimic acid was 1.49%.[Conclusion] Shikimic acid in Pinus elliottii Engelm could be used as a new resource to develop and utilize.展开更多
In order to improve the properties of the nickel?zinc battery and study the effects of the additives on performance of zinc electrode, 3 levels and 4 factors (acetylene black, Bi2O3, PbO, Ca[Zn(OH)3]2·2H2O coated...In order to improve the properties of the nickel?zinc battery and study the effects of the additives on performance of zinc electrode, 3 levels and 4 factors (acetylene black, Bi2O3, PbO, Ca[Zn(OH)3]2·2H2O coated by La(OH)3 ) that affect the zinc electrode were tested with orthogonal design experiments. The charge?discharge experiments of zinc electrode made up of only zinc oxide were done in 20% KOH solution to investigate the function of the additive. In order to better understand the discharge capability attenuation of electrode, the ratios of zinc to calcium in the worst sample and the best sample of the orthogonal design test were analyzed. The samples were characterized by charge?discharge cycling, phase structure analysis, cyclic voltammetry and X-ray diffraction. Experimental evidences indicate that the optimum ratio of electrode additive is as follows: 0.02 g acetylene black, 0.5 g Bi2O3, 0.3 g PbO and 0.2 g Ca[Zn(OH)3]2·2H2O coated with La(OH)3 in 5 g sample.展开更多
[Objective] Sesamin has been widely used in healthy food and medicines in recent years due to its prominent biological functions. This study was aimed to determine the optimal parameters for sesamin recrystallization,...[Objective] Sesamin has been widely used in healthy food and medicines in recent years due to its prominent biological functions. This study was aimed to determine the optimal parameters for sesamin recrystallization, to obtain high-quality and high-purity sesamin. [Method] The effects of solid-liquid ratio, heating tempera- ture and cooling temperature on sesamin recrystallization were investigated by sin- gle-factor experiments and orthogonal array testing （ORT）. The purity of resulting sesamJn was investigated by HPLC, [Result] The optimal conditions for the purifica- tion of sesamin were solid-liquid ratio of 1：10, heating temperature of 45 ℃ and cooling temperature of 25 ℃. Under these conditions, the purity of sesamin reached 95.26%. [Conclusion] Recrystallization is an effective technique to purify sesamin from sesame meal. Moreover, HPLC is also an ideal method for analyzing the purity of sesamin.展开更多
Soil samples were taken from depth of 0-12 cm in virgin broad-leaved Korean pine mixed forest in Changbai Moun-tain in July 2000. The effects of temperature, soil water content, pH, NH4+ and NO3- on N2O emission and C...Soil samples were taken from depth of 0-12 cm in virgin broad-leaved Korean pine mixed forest in Changbai Moun-tain in July 2000. The effects of temperature, soil water content, pH, NH4+ and NO3- on N2O emission and CH4 uptake of a for-est soil were studied in laboratory by the method of orthogonal design. It was observed under laboratory conditions in this study that there were significant correlations between N2O emission rate, CH4 oxidation rate, soil pH and temperature. Nevertheless, N2O emission rate also showed a significant positive correlation with CH4 oxidation rate. The results suggested that pH and temperature were important factors controlling N2O emission and CH4 oxidation under this experiment conditions.展开更多
Hot stretch-creep forming （SCF） is a novel technique to produce hard-to-form thin-walled metal components. Comprehensively considering the analysis results of the springback angle, yield strength and microstructure,...Hot stretch-creep forming （SCF） is a novel technique to produce hard-to-form thin-walled metal components. Comprehensively considering the analysis results of the springback angle, yield strength and microstructure, four hot SCF process parameters including temperature, stretch velocity, post stretch percentage and dwelling time of a Ti-6Al-4V alloy sheet were optimized using an orthogonal experiment. The results reveal that temperature is the most important factor on springback angle. The yield strength of the deformed material in 0° direction increases, while those in directions of 45° and 90° fluctuate around the original value. After hot SCF, the shape of some a phases changes from short thin grains to long slender ones, and the microhardness changes very little. The optimized parameters with temperature of 700 ℃, stretch velocity of 5 mm/min, post stretch percentage of 2% and dwelling time of 8 min are achieved finally.展开更多
[Objective] This study aimed to establish a multiplex PCR system for de- tecting transgenic ingredients from Citrus. [Method] Based on the pBI121 plasmid sequences published in GenBank and actin gene sequence of Citru...[Objective] This study aimed to establish a multiplex PCR system for de- tecting transgenic ingredients from Citrus. [Method] Based on the pBI121 plasmid sequences published in GenBank and actin gene sequence of Citrus, the primers specific to CaMV35S promoter, NOS promoter, NOS terminator and actin gene were designed, to establish a multiple PCR system which could detect four types of sequences. In addition, orthogonal tests were performed to determine the optimal concentrations of all the components in PCR reaction system, as well as the optimal PCR cycle parameters. [Result] The optimal PCR reaction system should contain 2.5μl of 10xPCR buffer, 2.0μl of MgCI2 （25 mmol/L）, 2.0 μl of dNTP mixture （2.5 mmol/L of each dNTP）, 1.0 μl of actin gene primers （10μmol/L）, 1.0μl of 35S promoter primers （10 μmol/L）, 1.5 μl of NOS promoter primers （10 μmol/L） and 0.5 μl of NOS terminator primers （10μmol/L）, 0.1 μg of template DNA, 1.25 U of Taq DNA polymerase; ddH20 was added to the total reaction system of 25μl. The PCR reaction program consisted of pre-denaturing at 94℃ for 5 min; 31 cycles of denaturing at 94℃ for 30 s, annealing at 64.1℃ for 45 s and extension at 72℃ for 50 s; final extension at 72℃ for 10 min. The reaction system optimized with the orthogonal tests could detect as less as 0.1% transgenic component in the tested samples. [Conclusion] The MPCR detection system established in this study can meet the requirements in theory for detecting the genetically modified ingredients in Citrus or the deep-processed products.展开更多
Based on the finite element （FE） program ANSYS, a three-dimensional model for the Runyang Suspension Bridge （RSB） is established. The structural natural frequency, vibration mode, stress and displacement response ...Based on the finite element （FE） program ANSYS, a three-dimensional model for the Runyang Suspension Bridge （RSB） is established. The structural natural frequency, vibration mode, stress and displacement response under various load cases are given. A new method of FE model updating is presented based on the physical meaning of sensitivity and the penalty function concept. In this method, the structural model is updated by modifying the parameters of design, and validated by structural natural vibration characteristics, stress response as well as displacement response. The design parameters used for updating are bounded according to measured static response and engineering judgment. The FE model of RSB is updated and validated by the measurements coming from the structural health monitoring system （SHMS）, and the FE baseline model reflecting the current state of RSB is achieved. Both the dynamic and static results show that the method is effective in updating the FE model of long span suspension bridges. The results obtained provide an important research basis for damage alarming and health monitoring of the RSB.展开更多
How to achieve the objective of reducing CO2 emissions has been an academic focus in China recently. The factors influencing CO2 emissions are the vital issue to accomplish the arduous target. Firstly, three influenti...How to achieve the objective of reducing CO2 emissions has been an academic focus in China recently. The factors influencing CO2 emissions are the vital issue to accomplish the arduous target. Firstly, three influential factors, the energy consumption, the proportion of tertiary industry in gross domestic product （GDP）, and the degree of dependence on foreign trade, are carefully selected, since all of them have closer grey relation with China＇s COz emissions compared with others when the grey relational analysis （GRA） method is applied. The study highlights co-integration relation of these four variables using the co-integration analysis method. And then a long-term co-integration equation and a short-term error correction model of China＇s CO2 emissions are devel- oped. Finally, the comparison is exerted between the forecast value and the actual value of China＇s CO2 emissions based on error correction model. The results and the relevant statistics tests show that the pro- posed model has better explanation capability and credibility.展开更多
The analysis of variance(ANOVA), multiple quadratic regression and radial basis function artificial neural network(RBFANN) methods were used to study the springback and tensile strength in age forming of 2A97 aluminum...The analysis of variance(ANOVA), multiple quadratic regression and radial basis function artificial neural network(RBFANN) methods were used to study the springback and tensile strength in age forming of 2A97 aluminum alloy based on orthogonal array. The ANOVA analysis indicates that the springback reaches the minimum value when age forming is performed at 210 °C for 20 h using a single-curvature die with a radius of 400 mm, and the tensile strength reaches the maximum value when age forming is performed at 180 °C for 15 h using a single-curvature die with a radius of 1000 mm. The orders of the importance for the three factors of pre-deformation radius, aging temperature and aging time on the springback and tensile strength were determined. By analyzing the predicted results of the multiple quadratic regression and RBFANN methods, the prediction accuracy of the RBFANN model is higher than that of the regression model.展开更多
基金supported by National Natural Science Foundation of China(Grant Nos.11971204,12271270)Natural Science Foundation of Jiangsu Province of China(Grant No.BK20200108)the Zhongwu Youth Innovative Talent Program of Jiangsu University of Technology and the Third Level Training Object of the Sixth“333 Project”in Jiangsu Province。
文摘The order-of-addition experiments are widely used in many fields,including food and industrial production,but the relative research under prior constraints is limited.The purpose of this paper is to select an optimal sequence under the restriction that component i is added before component j,while it is unachievable to compare all sequences when the number of components m is large.To achieve this,a constrained PWO model is first provided,and then the D-optimal designs for order-of addition experiments with minimal-points via the modified threshold accepting algorithm is established.The effectiveness of the proposed method is demonstrated through a job scheduling problem with a prior constraint for teaching cases.
基金Supported by National Natural Science Foundation of China(30560119)Supported by Natural Science Foundation of Guangxi(0991030)+3 种基金Innovational Plan Project for Guangxi Postgraduate Ed-ucation(2008105930817M46)Project of Science Research Project of Guangxi Education Department([2006]26),Project of Science Research Project of Guangxi Education Department(200708LX180)Scientific Researc-hing fund project of Guangxi University(X081020)Fund Project for Guangxi Young People(0832008)~~
文摘[Objective] The aim was to provide scientific basis for development and utilization of Pinus elliottii Engelm resources.[Method] The extraction process of shikimic acid in Pinus elliottii Engelm was studied,and the content of shikimic acid was determined by HPLC.The HPLC conditions were as follows;Alltima NH2 （5 μm,4.6 mm × 150 mm） column separation;the mobile phase was acetonitrile-2%H3PO4 （90：10）;the flowing velocity was 1 ml/min;test wavelength was 213 nm,the width of belt was 16 nm;reference wavelength was 300 nm,the width of belt was 80 nm.[Result] By the single factor and orthogonal tests,the optimum conditions were found as follows：ethanol concentration 60%,extraction temperature 75 ℃,solid-liquid ratio 1：25,extraction time 2.5 h.The extraction rate of shikimic acid was 1.49%.[Conclusion] Shikimic acid in Pinus elliottii Engelm could be used as a new resource to develop and utilize.
文摘In order to improve the properties of the nickel?zinc battery and study the effects of the additives on performance of zinc electrode, 3 levels and 4 factors (acetylene black, Bi2O3, PbO, Ca[Zn(OH)3]2·2H2O coated by La(OH)3 ) that affect the zinc electrode were tested with orthogonal design experiments. The charge?discharge experiments of zinc electrode made up of only zinc oxide were done in 20% KOH solution to investigate the function of the additive. In order to better understand the discharge capability attenuation of electrode, the ratios of zinc to calcium in the worst sample and the best sample of the orthogonal design test were analyzed. The samples were characterized by charge?discharge cycling, phase structure analysis, cyclic voltammetry and X-ray diffraction. Experimental evidences indicate that the optimum ratio of electrode additive is as follows: 0.02 g acetylene black, 0.5 g Bi2O3, 0.3 g PbO and 0.2 g Ca[Zn(OH)3]2·2H2O coated with La(OH)3 in 5 g sample.
基金Supported by Natural Science Foundation of Anhui Province(1608085MC53)~~
文摘[Objective] Sesamin has been widely used in healthy food and medicines in recent years due to its prominent biological functions. This study was aimed to determine the optimal parameters for sesamin recrystallization, to obtain high-quality and high-purity sesamin. [Method] The effects of solid-liquid ratio, heating tempera- ture and cooling temperature on sesamin recrystallization were investigated by sin- gle-factor experiments and orthogonal array testing （ORT）. The purity of resulting sesamJn was investigated by HPLC, [Result] The optimal conditions for the purifica- tion of sesamin were solid-liquid ratio of 1：10, heating temperature of 45 ℃ and cooling temperature of 25 ℃. Under these conditions, the purity of sesamin reached 95.26%. [Conclusion] Recrystallization is an effective technique to purify sesamin from sesame meal. Moreover, HPLC is also an ideal method for analyzing the purity of sesamin.
基金This paper was supported by Chinese Academy of Sciences.
文摘Soil samples were taken from depth of 0-12 cm in virgin broad-leaved Korean pine mixed forest in Changbai Moun-tain in July 2000. The effects of temperature, soil water content, pH, NH4+ and NO3- on N2O emission and CH4 uptake of a for-est soil were studied in laboratory by the method of orthogonal design. It was observed under laboratory conditions in this study that there were significant correlations between N2O emission rate, CH4 oxidation rate, soil pH and temperature. Nevertheless, N2O emission rate also showed a significant positive correlation with CH4 oxidation rate. The results suggested that pH and temperature were important factors controlling N2O emission and CH4 oxidation under this experiment conditions.
基金Project(51175022)supported by the National Natural Science Foundation of ChinaProject(51318040315)supported by the National Defense Pre-research of China+1 种基金Project(09000114)supported by Initial Funding for the Doctoral Program of BIGCProject(E-a-2014-13)supported by BIGC Key Project
文摘Hot stretch-creep forming （SCF） is a novel technique to produce hard-to-form thin-walled metal components. Comprehensively considering the analysis results of the springback angle, yield strength and microstructure, four hot SCF process parameters including temperature, stretch velocity, post stretch percentage and dwelling time of a Ti-6Al-4V alloy sheet were optimized using an orthogonal experiment. The results reveal that temperature is the most important factor on springback angle. The yield strength of the deformed material in 0° direction increases, while those in directions of 45° and 90° fluctuate around the original value. After hot SCF, the shape of some a phases changes from short thin grains to long slender ones, and the microhardness changes very little. The optimized parameters with temperature of 700 ℃, stretch velocity of 5 mm/min, post stretch percentage of 2% and dwelling time of 8 min are achieved finally.
基金Supported by the Special Fund for Key Laboratories of Chongqing (CSTC)National Technology Research and Development Program of Ministry of Science and Technology for Countryside Field (863 Program,2011AA100205)+1 种基金Special Fund for Agro-scientific Research in the Public Interest of Ministry of Agriculture of China(201003067)Key Science and Technology Research Program of Ministry of Education of China (109131)~~
文摘[Objective] This study aimed to establish a multiplex PCR system for de- tecting transgenic ingredients from Citrus. [Method] Based on the pBI121 plasmid sequences published in GenBank and actin gene sequence of Citrus, the primers specific to CaMV35S promoter, NOS promoter, NOS terminator and actin gene were designed, to establish a multiple PCR system which could detect four types of sequences. In addition, orthogonal tests were performed to determine the optimal concentrations of all the components in PCR reaction system, as well as the optimal PCR cycle parameters. [Result] The optimal PCR reaction system should contain 2.5μl of 10xPCR buffer, 2.0μl of MgCI2 （25 mmol/L）, 2.0 μl of dNTP mixture （2.5 mmol/L of each dNTP）, 1.0 μl of actin gene primers （10μmol/L）, 1.0μl of 35S promoter primers （10 μmol/L）, 1.5 μl of NOS promoter primers （10 μmol/L） and 0.5 μl of NOS terminator primers （10μmol/L）, 0.1 μg of template DNA, 1.25 U of Taq DNA polymerase; ddH20 was added to the total reaction system of 25μl. The PCR reaction program consisted of pre-denaturing at 94℃ for 5 min; 31 cycles of denaturing at 94℃ for 30 s, annealing at 64.1℃ for 45 s and extension at 72℃ for 50 s; final extension at 72℃ for 10 min. The reaction system optimized with the orthogonal tests could detect as less as 0.1% transgenic component in the tested samples. [Conclusion] The MPCR detection system established in this study can meet the requirements in theory for detecting the genetically modified ingredients in Citrus or the deep-processed products.
文摘Based on the finite element （FE） program ANSYS, a three-dimensional model for the Runyang Suspension Bridge （RSB） is established. The structural natural frequency, vibration mode, stress and displacement response under various load cases are given. A new method of FE model updating is presented based on the physical meaning of sensitivity and the penalty function concept. In this method, the structural model is updated by modifying the parameters of design, and validated by structural natural vibration characteristics, stress response as well as displacement response. The design parameters used for updating are bounded according to measured static response and engineering judgment. The FE model of RSB is updated and validated by the measurements coming from the structural health monitoring system （SHMS）, and the FE baseline model reflecting the current state of RSB is achieved. Both the dynamic and static results show that the method is effective in updating the FE model of long span suspension bridges. The results obtained provide an important research basis for damage alarming and health monitoring of the RSB.
基金Supported by the National Natural Science Foundation of China(41101569)the China Postdoctoral Science Foundation Funded Project(2011M500965)+5 种基金the Jiangsu Funds of Social Science(11EYC023)the Doctoral Discipline New Teachers Fund(20110095120002)the Jiangsu Postdoctoral Science Foundation Funded Project(1102088C)the Fundamental Research Funds for the Central Universities(JGJ110763)the Talent Introduction Funds of China University of Mining and Technologythe Sail Plan Funds for Young Teachers of China University of Mining and Technology~~
文摘How to achieve the objective of reducing CO2 emissions has been an academic focus in China recently. The factors influencing CO2 emissions are the vital issue to accomplish the arduous target. Firstly, three influential factors, the energy consumption, the proportion of tertiary industry in gross domestic product （GDP）, and the degree of dependence on foreign trade, are carefully selected, since all of them have closer grey relation with China＇s COz emissions compared with others when the grey relational analysis （GRA） method is applied. The study highlights co-integration relation of these four variables using the co-integration analysis method. And then a long-term co-integration equation and a short-term error correction model of China＇s CO2 emissions are devel- oped. Finally, the comparison is exerted between the forecast value and the actual value of China＇s CO2 emissions based on error correction model. The results and the relevant statistics tests show that the pro- posed model has better explanation capability and credibility.
文摘The analysis of variance(ANOVA), multiple quadratic regression and radial basis function artificial neural network(RBFANN) methods were used to study the springback and tensile strength in age forming of 2A97 aluminum alloy based on orthogonal array. The ANOVA analysis indicates that the springback reaches the minimum value when age forming is performed at 210 °C for 20 h using a single-curvature die with a radius of 400 mm, and the tensile strength reaches the maximum value when age forming is performed at 180 °C for 15 h using a single-curvature die with a radius of 1000 mm. The orders of the importance for the three factors of pre-deformation radius, aging temperature and aging time on the springback and tensile strength were determined. By analyzing the predicted results of the multiple quadratic regression and RBFANN methods, the prediction accuracy of the RBFANN model is higher than that of the regression model.
