A new high throughput heat-treatment method with a continuous temperature gradient between 600 and 700 ？C was utilized on the Ti-5553 alloy（Ti-5 Al-5 Mo-5 V-3 Cr, mass fraction, %）. The temperature gradient was ind...A new high throughput heat-treatment method with a continuous temperature gradient between 600 and 700 ？C was utilized on the Ti-5553 alloy（Ti-5 Al-5 Mo-5 V-3 Cr, mass fraction, %）. The temperature gradient was induced by the variation of the axial section of sample, which was heated by the direct current. The variation of continuous cooling rates on the treated sample was realized by using the end quenching method. The microstructural evolution and mechanical properties under different heat treatment conditions were evaluated. The results show that the pseudo-spinodal decomposition of the alloy occurs at（617±1） ？C, and the size of the precipitated α phase is around 300 nm. Moreover, the highest microhardness is obtained after the heat treatment at the pseudo-spinodal decomposition temperature for 4 h. These indicate that the high throughput method is efficient and fast to determine the phase transformation temperature and corresponding microstructural evolution of alloys.展开更多
Heating the oil shale by current underground to accomplish in-situ transformation process, is a viable direction. The electrical properties of oil shale under different temperatures, especially the resistance, become ...Heating the oil shale by current underground to accomplish in-situ transformation process, is a viable direction. The electrical properties of oil shale under different temperatures, especially the resistance, become important. Charging oil shale underground to heat oil shale till kerogen's decomposition temperature, then crude oil and other gases can be generated. The resistance of the oil shale samples was measured by Direct Current (DC) quadripole method to find out the variation rules of resistance value. In the experiments, oil shale presented its semiconductor property. When heated till 350℃-450℃, its resistance changed greatly, optional for heating and cracking. The porosity, oil content, media and composition affected the resistance largely.展开更多
Nano-MnFe2O4 particles were synthesized by co-precipitation phase inversion method and low-temperature combustion method respectively, using MnCl2, FeCl3, Mn（NO3）2, Fe（NO3）3, NaOH and C6H8O7. X-ray diffraction （...Nano-MnFe2O4 particles were synthesized by co-precipitation phase inversion method and low-temperature combustion method respectively, using MnCl2, FeCl3, Mn（NO3）2, Fe（NO3）3, NaOH and C6H8O7. X-ray diffraction （XRD）, transmission electron microscope （TEM）, Fourier transform infrared spectroscopy （FT-IR）, thermogravim-etry-differential thermal analysis （TG-DTA） and differential scanning calorimetry （DSC） were used to characterize the structure, morphology, thermal stability of MnFe2O4 and its catalytic performance to ammonium perchlorate. Results showed that single-phased and uniform spinel MnFe2O4 was obtained. The average particle size was about 30 and 20 nm. The infrared absorption peaks appeared at about 420 and 574 cm-1, and the particles were stable below 524 ℃. Using the two prepared catalysts, the higher thermal decomposition temperature of ammonium perchlorate was decreased by 77.3 and 84.9 ℃ respectively, while the apparent decomposition heat was increased by 482.5 and 574.3 J？g？1. The catalytic mechanism could be explained by the favorable electron transfer space provided by outer d orbit of transition metal ions and the high specific surface absorption effect of MnFe2O4 particles.展开更多
基金Project(2014CB644002)supported by the National Basic Research and Development Project of ChinaProject(2015CX004)supported by the Innovation-driven Plan in Central South University,China
文摘A new high throughput heat-treatment method with a continuous temperature gradient between 600 and 700 ？C was utilized on the Ti-5553 alloy（Ti-5 Al-5 Mo-5 V-3 Cr, mass fraction, %）. The temperature gradient was induced by the variation of the axial section of sample, which was heated by the direct current. The variation of continuous cooling rates on the treated sample was realized by using the end quenching method. The microstructural evolution and mechanical properties under different heat treatment conditions were evaluated. The results show that the pseudo-spinodal decomposition of the alloy occurs at（617±1） ？C, and the size of the precipitated α phase is around 300 nm. Moreover, the highest microhardness is obtained after the heat treatment at the pseudo-spinodal decomposition temperature for 4 h. These indicate that the high throughput method is efficient and fast to determine the phase transformation temperature and corresponding microstructural evolution of alloys.
文摘Heating the oil shale by current underground to accomplish in-situ transformation process, is a viable direction. The electrical properties of oil shale under different temperatures, especially the resistance, become important. Charging oil shale underground to heat oil shale till kerogen's decomposition temperature, then crude oil and other gases can be generated. The resistance of the oil shale samples was measured by Direct Current (DC) quadripole method to find out the variation rules of resistance value. In the experiments, oil shale presented its semiconductor property. When heated till 350℃-450℃, its resistance changed greatly, optional for heating and cracking. The porosity, oil content, media and composition affected the resistance largely.
基金Supported by the National Natural Science Foundation of China （90305008, 51077072）.
文摘Nano-MnFe2O4 particles were synthesized by co-precipitation phase inversion method and low-temperature combustion method respectively, using MnCl2, FeCl3, Mn（NO3）2, Fe（NO3）3, NaOH and C6H8O7. X-ray diffraction （XRD）, transmission electron microscope （TEM）, Fourier transform infrared spectroscopy （FT-IR）, thermogravim-etry-differential thermal analysis （TG-DTA） and differential scanning calorimetry （DSC） were used to characterize the structure, morphology, thermal stability of MnFe2O4 and its catalytic performance to ammonium perchlorate. Results showed that single-phased and uniform spinel MnFe2O4 was obtained. The average particle size was about 30 and 20 nm. The infrared absorption peaks appeared at about 420 and 574 cm-1, and the particles were stable below 524 ℃. Using the two prepared catalysts, the higher thermal decomposition temperature of ammonium perchlorate was decreased by 77.3 and 84.9 ℃ respectively, while the apparent decomposition heat was increased by 482.5 and 574.3 J？g？1. The catalytic mechanism could be explained by the favorable electron transfer space provided by outer d orbit of transition metal ions and the high specific surface absorption effect of MnFe2O4 particles.
