高压试火危害大

我是一名修理工,在十几年的维修生涯中,遇到过无数次高压试火的情况,也亲手做过无数次高压试火的试验,因为这是维修工又快又简便的土办法。一般来说,车子发动不着时,首先拔出高压线试火。如有火。

汽车电子点火系统故障检查及排除方法

汽车电子点火系统的故障检查，与传统触点式点火系统有许多相同之处。除了对点火线圈、火花塞、高压线、点火正时等进行检查外。还应检查点火器、点火传感器(信号发生器)以及连接导线等。但是，在故障检查时还应注意以下几点：

怠速不稳不能只调怠速螺钉

一辆本田阿科德美国款化油器式发动机怠不稳定，从低怠速升至1500，分。维持几秒钟，转速又降至低怠速。发动机处于周期性的变速运转状态（俗称游车）。经调整怠速螺钉后。也没有排除此故障。并且又造成开空调后发动机就熄火的新故障。经检查：汽油泵压力正常；主高压试火检查。火花呈蓝白色，属正常；分缸高压线阻值正常。分电器盖无裂痕。

Ductility improvement methods for commercial AZ31B magnesium alloy in cold forging

In order to realize cold forging of magnesium alloys in practical application,some methods for ductility improvement of a commercial wrought AZ31B magnesium alloy(Mg-3%Al-1%Zn,mass fraction) at room temperature were suggested.The effects of heat treatment before forging and hydrostatic pressure during forging on the ductility were investigated in cold upsetting and cup forging.High-temperature annealing was effective to reduce the degree of the texture anisotropy of the specimen,and it was found that the forging limit of the annealed specimen was improved in cold forging.On the other hand,cold cup forging of the annealed specimen was carried out with applying counter pressure.By applying counter pressures of 100-200 MPa during forging,the critical punch stroke for forging limit of the specimen without crack was improved by 25%in punch stroke.