This study is to understand the impact of operating condition, especially initial operation temperature （Tini） which is set in high temperature range, on the temperature profile of the interface between PEM （polyme...This study is to understand the impact of operating condition, especially initial operation temperature （Tini） which is set in high temperature range, on the temperature profile of the interface between PEM （polymer electrolyte membrane） and catalyst layer at the cathode （i.e., the reaction surface） in a single PEFC （polymer electrolyte fuel cell）. A 1D multi-plate heat transfer model based on the temperature data of separator measured using thermograph in a power generation experiment was developed to evaluate the reaction surface temperature （Treact）. This study investigated the effects of Tini, flow rate and relative humidity of supply gas as well as thickness of PEM on the temperature distribution on reaction surface. As a result, the impact of flow rate of supply gas on the temperature distribution is not significant irrespective of relative humidity conditions as well as PEM type. When operated at high temperature, the temperature distribution is relatively flat in the case of thicker PEM （Nafion 115）, while Treact rises from the inlet to the outlet large and the temperature distribution is wide in the case of thin PEM （Nafion 211） irrespective of relative humidity condition. Since the water transfer through PEM in the case of Nafion 211 is better than Nafion 115 due to thin PEM, the power generation is promoted along the gas flow with the aid of humidification by water produced from electrochemical reaction.展开更多
文摘This study is to understand the impact of operating condition, especially initial operation temperature （Tini） which is set in high temperature range, on the temperature profile of the interface between PEM （polymer electrolyte membrane） and catalyst layer at the cathode （i.e., the reaction surface） in a single PEFC （polymer electrolyte fuel cell）. A 1D multi-plate heat transfer model based on the temperature data of separator measured using thermograph in a power generation experiment was developed to evaluate the reaction surface temperature （Treact）. This study investigated the effects of Tini, flow rate and relative humidity of supply gas as well as thickness of PEM on the temperature distribution on reaction surface. As a result, the impact of flow rate of supply gas on the temperature distribution is not significant irrespective of relative humidity conditions as well as PEM type. When operated at high temperature, the temperature distribution is relatively flat in the case of thicker PEM （Nafion 115）, while Treact rises from the inlet to the outlet large and the temperature distribution is wide in the case of thin PEM （Nafion 211） irrespective of relative humidity condition. Since the water transfer through PEM in the case of Nafion 211 is better than Nafion 115 due to thin PEM, the power generation is promoted along the gas flow with the aid of humidification by water produced from electrochemical reaction.
