期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
无醇醚类溶剂高厚膜型阴极环氧电泳乳液的研制
1
作者 梁卫南 《现代涂料与涂装》 CAS 2024年第11期22-24,共3页
开发了一种能满足一次电泳涂膜厚度达40μm以上的无醇醚类溶剂高厚膜型阴极环氧电泳乳液。该乳液通过合成线性交联剂、改性环氧树脂以及添加非反应型增塑剂等制备而成。结果表明:该产品电泳涂膜达到40μm甚至50μm时,也能保持良好的流... 开发了一种能满足一次电泳涂膜厚度达40μm以上的无醇醚类溶剂高厚膜型阴极环氧电泳乳液。该乳液通过合成线性交联剂、改性环氧树脂以及添加非反应型增塑剂等制备而成。结果表明:该产品电泳涂膜达到40μm甚至50μm时,也能保持良好的流平外观。 展开更多
关键词 高厚膜 无醇醚类溶剂 电泳涂料
下载PDF
新型100%粉体聚酰胺蜡流变剂在高厚膜型防腐涂料中的应用 被引量:4
2
作者 王全义 金勇军 《上海涂料》 CAS 2012年第5期49-52,共4页
通过实例详细介绍了新型100%粉体聚酰胺蜡流变剂的特点。以溶剂型高厚膜型环氧及聚氨酯防腐涂料体系为例,从不同角度,如活化温度、分散性、Stormer黏度、Brookfield黏度、抗流挂性、热贮存稳定性、抗结粒性等方面来阐述其与传统型流变... 通过实例详细介绍了新型100%粉体聚酰胺蜡流变剂的特点。以溶剂型高厚膜型环氧及聚氨酯防腐涂料体系为例,从不同角度,如活化温度、分散性、Stormer黏度、Brookfield黏度、抗流挂性、热贮存稳定性、抗结粒性等方面来阐述其与传统型流变剂的区别。 展开更多
关键词 新型粉体聚酰胺蜡 流变剂 高厚膜型防腐涂料
下载PDF
高厚膜弹性聚氨酯涂料在工业防腐中的应用
3
作者 王志宇 《涂料工业》 CAS CSCD 2001年第1期29-30,共2页
以某厂废水处理池防腐工程为例,研究了高厚膜弹性聚氨酯涂料在工业防腐中的应用,并阐述了无气喷涂设备在涂料施工中的使用方法、特点及注意事项。
关键词 聚氨酯涂料 无气喷涂 高厚膜 防腐蚀 工业防腐
下载PDF
Measurement Method of the Thickness Uniformity for Polymer Films 被引量:1
4
作者 YANGHong-liang RENQuan FANYun-zheng 《Semiconductor Photonics and Technology》 CAS 2003年第2期128-132,共5页
Several methods for investigating the thickness uniformity of polymer thin films are presented as well as their measurement principles. A comparison of these experimental methods is given.The cylindrical lightwave ref... Several methods for investigating the thickness uniformity of polymer thin films are presented as well as their measurement principles. A comparison of these experimental methods is given.The cylindrical lightwave reflection method is found to can obtain the thickness distribution along a certain direction.It is a simple and suitable method to evaluate the film thickness uniformity. 展开更多
关键词 Polymer complex thin films Thickness uniformity Measurement method
下载PDF
Design Guideline of Ultra Thin Body MOSFET
5
作者 王文平 黄如 张国艳 《Journal of Semiconductors》 EI CAS CSCD 北大核心 2004年第10期1227-1232,共6页
Simulation method is used to provide a guideline f or ultra thin body(UTB) MOSFET designs.Three important parameters of the UTB MOS FE T,i.e.the raised S/D height,Ge mole fraction of the Ge xSi 1-x gate,and the ... Simulation method is used to provide a guideline f or ultra thin body(UTB) MOSFET designs.Three important parameters of the UTB MOS FE T,i.e.the raised S/D height,Ge mole fraction of the Ge xSi 1-x gate,and the silic on body thickness,are comprehensively analyzed and optimized.The optimal region of feasible Ge mole fraction and the silicon body thickness for low operating po wer device are given.As the simulation results show that through changing Ge mole fraction coupl ed with the silicon body thickness tuning,UTB device with good performance can b e obtained. 展开更多
关键词 ultra thin body MOSFET raised S/D height Ge mole fraction silicon body thicknessEEACC:4250 128 0
下载PDF
The diagnostic value of tumor abnormal protein and high sensitivity C reactive protein in screening for endometrial cancer with endometrial thickness less than 8 mm 被引量:3
6
作者 Yi Li Ruiqin Yue +4 位作者 Dongrui Qin Yanqing Wang Xinling Zhou Xinyong Jing Chuanzhong Wu 《Oncology and Translational Medicine》 2016年第4期185-188,共4页
Objective This study aimed to combine tumor abnormal protein(TAP) and high-sensitivity C-reactive protein(hs-CRP) level detection to diagnose endometrial cancer in patients with endometrial thickness less than 8 mm, a... Objective This study aimed to combine tumor abnormal protein(TAP) and high-sensitivity C-reactive protein(hs-CRP) level detection to diagnose endometrial cancer in patients with endometrial thickness less than 8 mm, and to provide a reference for clinical screening and diagnosis. Methods Clinical data from 19 cases of endometrial cancer, diagnosed on the basis of pathological findings, were collected from September 2014 to December 2015. The inclusion criteria were as follows: the patients were first diagnosed with endometrial thickness less than 8 mm and were all in menopause. Perimenopausal patients(n = 26) with uterine fibroids seen during the same period were selected as a control group. Serum TAP and hs-CRP levels of the patients in the two groups were simultaneously determined on admission. Results We found that both TAP and hs-CRP levels in the experimental group were higher than those in the control group [(182.95 ± 72.14) μm^2 vs.(133.19 ± 55.18) μm^2, P = 0.019;(7.52 ± 19.03) mg/L vs.(1.66 ± 2.31) mg/L, P = 0.136]. The sensitivity of TAP for the diagnosis of endometrial cancer was 73.68%, the specificity was 69.23%, and the Youden index was 0.4291. The diagnostic sensitivity and specificity of hs-CRP was 15.79% and 100%, respectively, and the Youden index was 0.1579. After plotting the receiver operating characteristics curves, the optimal cut-off value for TAP in diagnosing endometrial cancer was found to be 160.662 μm^2 and that for hs-CRP was 1.07 mg/L. Conclusion For patients suspected of having endometrial cancer with endometrial thickness less than 8 mm, combined detection of TAP and hs-CRP levels can be used as a screening tool and can provide new ideas regarding clinical diagnosis and treatment. 展开更多
关键词 tumor abnormal protein(TAP) high-sensitivity C-reactive protein(hs-CRP) endometrial thickness endometrial carcinoma
下载PDF
Assessments of tear meniscus height, tear film thickness, and corneal epithelial thickness after deep anterior lamellar keratoplasty 被引量:2
7
作者 Wen-jia XIE Ye-sheng XU +1 位作者 Xia ZHANG Yu-feng YAO 《Journal of Zhejiang University-Science B(Biomedicine & Biotechnology)》 SCIE CAS CSCD 2018年第3期218-226,共9页
Objective: To assess the lower tear meniscus height(LTMH), central tear film thickness(CTFT), and central corneal epithelial thickness(CCET) after deep anterior lamellar keratoplasty(DALK). Methods: This was... Objective: To assess the lower tear meniscus height(LTMH), central tear film thickness(CTFT), and central corneal epithelial thickness(CCET) after deep anterior lamellar keratoplasty(DALK). Methods: This was a retrospective cross-sectional study of 20 patients who had DALK in one eye over a three-month period. LTMH, CTFT, and CCET of the operated eyes and the unoperated fellow eyes were measured using high-definition optical coherence tomography(HD-OCT). Correlations between three OCT assessments and age, time following surgery, graft size, bed size, and the number of residual sutures were analyzed. Results: Compared to patients with keratoconus, patients with other corneal conditions had significantly higher CCET in the fellow eye(P=0.024). For all patients, CCET in the operated eye was significantly negatively correlated with the number of residual sutures(R=-0.579, P=0.008), and was significantly positively correlated with time following surgery(R=0.636, P=0.003). In the fellow eye, a significant positive correlation was found between age and CCET(R=0.551, P=0.012), and a significant negative correlation between age and CTFT(R=-0.491, P=0.028). LTMH was found to be significantly correlated between operated and fellow eyes(R=0.554, P=0.011). There was no significant correlation between LTMH and age, bed/graft size, time following surgery, or residual sutures(all possible correlations, P0.05). Conclusions: Patients with keratoconus tend to have a thinner central corneal epithelium. Corneal epithelium keeps regenerating over time after DALK. DALK did not induce a significant change in tear volume compared with the fellow eye. Postoperative tear function might depend on an individual's general condition, rather than on age, gender, bed/graft size, time following surgery, or residual sutures. 展开更多
关键词 Tear meniscus height Corneal epithelial thickness Tear film Deep anterior lamellar keratoplasty (DALK) High-definition optical coherence tomography (HD-OCT) KERATOCONUS
原文传递
Design of high-sensitivity metal-coated LPFG sensor based on material dispersion 被引量:3
8
作者 石彦军 顾铮■ 《Optoelectronics Letters》 EI 2012年第4期269-272,共4页
A high-sensitivity metal-coated long-period fiber grating(LPFG) sensor based on material dispersion is designed.Based on the coupled mode theory,the influence of the material dispersion on the dual-peak characteristic... A high-sensitivity metal-coated long-period fiber grating(LPFG) sensor based on material dispersion is designed.Based on the coupled mode theory,the influence of the material dispersion on the dual-peak characteristics of the metal-coated LPFG is studied.After considering the material dispersion,the jumping region of the dual-resonant-wavelength shifts toward the thinner film thickness,and the sensitivity of the dual-peak metal-coated LPFG sensor to liquid refractive index(RI) can be obtained to supply accurate parameter combinations.Experimentally,two kinds of silver-coated LPFGs with different film thicknesses and grating periods are fabricated to monitor the salt solution,and the sensitivities of these two sensors are compared.The experimental results are consistent with the theoretical analyses. 展开更多
关键词 Dispersion (waves) Film thickness Metal coatings Refractive index SENSORS
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部