高原山体遮挡对湖泊和城区风场的影响

为了探究高原山体遮挡对湖泊和城区上空风场变化的影响,选取昆明市西山和西山东侧的草海及部分城区为研究对象,以1∶1 800的缩尺比制作了实物模型,利用风洞实验模拟了有山体遮挡和无山体遮挡在主导风西南风作用下的风场变化,并结合数值模拟验证了有山体遮挡情况下的风洞实验。实验结果表明:山体遮挡对下风向的山脚区和湖泊区风速影响较大;山体高度为260和460 m时,距离山体4 500 m范围内山体对下风向山脚区和湖泊区中部及南部的风速削减较大;山体高度为110 m时,山体对下风向区域的影响主要体现在对山前风速的削减,并未对湖泊和城市区域产生较为明显的风速梯度变化。

Relationships between Landslide Types and Topographic Attributes in a Loess Catchment,China

Topographic attributes have been identified as the most important factor in controlling the initiation and distribution of shallow landslides triggered by rainfall.As a result,these landslides influence the evolution of local surface topography.In this research,an area of 2.6 km 2 loess catchment in the Huachi County was selected as the study area locating in the Chinese Loess Plateau.The landslides inventory and landslide types were mapped using global position system(GPS) and field mapping.The landslide inventory shows that these shallow landslides involve different movement types including slide,creep and fall.Meanwhile,main topographic attributes were generated based on a high resolution digital terrain model(5 m × 5 m),including aspect,slope shape,elevation,slope angle and contributing area.These maps were overlaid with the spatial distributions of total landslides and each type of landslides in a geographic information system(GIS),respectively,to assess their spatial frequency distributions and relative failure potentials related to these selected topographic attributes.The spatial analysis results revealed that there is a close relation between the topographic attributes of the postlandsliding local surface and the types of landslide movement.Meanwhile,the types of landslide movement have some obvious differences in local topographic attributes,which can influence the relative failure potential of different types of landslides.These results have practical significance to mitigate natural hazard and understandgeomorphologic process in thick loess area.

The structure of Circum-Tibetan Plateau Basin-Range System and the large gas provinces

Northward subduction of the Cenozoic Tethys ocean caused the convergence and collision of Eurasia-Indian Plates, resulting in the lower crust thickening, the upper crust thrusting, and the Qinghai-Tibet uplifting, and forming the plateau landscape. In company with uplifting and northward extruding of the Tibetan plateau, the contractional tectonic deformations persistently spread outward, building a gigantic basin-range system around the Tibetan plateau. This system is herein termed as the Cir- cure-Tibetan Plateau Basin-Range System, in which the global largest diffuse and the most energetic intra-continental defor- mations were involved, and populations of inheritance foreland basins or thrust belts were developed along the margins of an- cient cratonic plates due to the effects of the cratonic amalgamation, crust differentiation, orogen rejuvenation, and basin sub- sidence. There are three primary tectonic units in the Circum-Tibet Plateau Basin-Range System, which are the reactivated an- cient orogens, the foreland thrust belts, and the miniature cratonic basins. The Circum-Tibetan Plateau Basin-Range System is a gigantic deformation system and particular Himalayan tectonic domain in central-western China and is comparable to the Tibetan Plateau. In this system, northward and eastward developments of thrust deformations exhibit an arc-shaped area along the Kunlun-Altyn-Qilian-Longmenshan mountain belts, and further expand outward to the Altai-Yinshan-Luliangshan- Huayingshan mountain belts during the Late Cenozoic sustained collision of Indo-Asia. Intense intra-continental deformations lead ancient orogens to rejuvenate, young foreland basins to form in-between orogens and cratons, and thrusts to propagate from orogens to cratons in successive order. Driven by the Eurasia-Indian collision and its far field effects, both deformation and basin-range couplings in the arc-shaped area decrease from south to north. When a single basin-range unit is focused on, deformations become younger and younger together with more and more simple structural styles from piedmonts to craton in- teriors. In the Circum-Tibetan Plateau Basin-Range System, it presents three segmented tectonic deformational patterns： prop- agating in the west, growth-overthrusting in the middle, and slip-uplifting in the east. For natural gas exploration, two tectonic units, both the Paleozoic cratonic basins and the Cenozoic foreland thrust belts, are important because hydrocarbon in cen- tral-western China is preserved mainly in the Paleozoic cratonic paleo-highs and the Meso-Cenozoic foreland thrust belts, to- gether with characteristics of multiphrase hydrocarbon generation but late accumulation and enrichment.

Breeding ecology of ground tits in northeastern Tibetan plateau, with special reference to cooperative breeding system

Data on breeding ecology of a color-band marked population of the ground tit Parus humilis were collected in north Qinghai on the Tibetan plateau, during 2008 and 2009. In spring the birds excavated 0.8-3.2 m long nesting burrows under the ground. First-egg laying occurred between late April and late June during which a pair produced one brood. Incubation was done by female alone for 15-16 days and nestling-feeding by both sexes and helpers in any for 23-25 days. Average brood size at fledging was 5.8 （＋ 1.4 SD, 3-8） and all the 27 observed nesting attempts fledged at least one young. At the population level, brood sex ratio did not differ from 1：1. The birds are a territory-living resident, with annual resight rates being 48% （22 of 46） in adult breeders and 10% （7 of 67） in yearlings. Pairs were socially monogamous, of which 23% （9 of 40） contained one and some- times two male helpers, most likely being philopatric sons of the breeders. The formation of cooperative groups is similar to the population in central Tibet but differs from that in south Guansu where breeding ground tits exhibit a high level of annual turnover