Using the devices of split Hopkinson tension bar(SHTB)and split Hopkinson pressure bar(SHPB),the dynamic tension and compression experiments in three typical forming directions(rolling direction(RD),transverse directi...Using the devices of split Hopkinson tension bar(SHTB)and split Hopkinson pressure bar(SHPB),the dynamic tension and compression experiments in three typical forming directions(rolling direction(RD),transverse direction(TD)and normal direction(ND))were carried out at strain rates of 1000,2000 and 4000 s-1,respectively.From the microscopic point of view,the effect of strain rate and anisotropy on tension compression asymmetry of aviation aluminum alloy 7050 was studied by scanning electron microscope(SEM),metallographic microscope and electron backscatter diffraction(EBSD).The results showed that there was obvious asymmetry between tension and compression,especially that the yield strength of the material in tension was higher than that in compression.The asymmetry in the elastic stage of tension-compression was weaker and the asymmetry in the strengthening stage was stronger with the increase of strain rate.At the same strain rate,the changing trend of the flow stress was distinct under different orientations of tension and compression,which was related to the stress direction of the grains.According to EBSD grain orientation analysis and raw material texture pole figure analysis,it was found that the larger the difference in the degree of grain refinement during tension and compression,the larger the macro-flow stress difference.展开更多
The aim of this paper is to describe and analyse the behaviour of heart rate variability(HRV)during constant-load,high-intensity exercise using a time frequency analysis(Wavelet Transform).Eleven elite cyclists took p...The aim of this paper is to describe and analyse the behaviour of heart rate variability(HRV)during constant-load,high-intensity exercise using a time frequency analysis(Wavelet Transform).Eleven elite cyclists took part in the study(age:18.6±3.0 years;VO_(2max):4.88±0.61 litres·min^(-1)).Initially,all subjects performed an incremental cycloergometer test to determine load power in a constant load-test(379.55±36.02 W;89.0%).HRV declined dramatically from the start of testing(p<0.05).The behaviour of power spectral density within the LF band mirrored that of total energy,recording a significant decrease from the outset LF peaks fell rapidly thereafter,remaining stable until the end of the test.HF-VHF fell sharply in the first 20 to 30 seconds.The relative weighting(%) of HF-VHF was inverted with the onset of fatigue,[1.6%at the start,7.1(p<0.05) at the end of the first phase,and 43.1%(p<0.05) at the end of the test].HF-VHF_(peak) displayed three phases:a moderate initial increase,followed by a slight fall,thereafter increasing to the end of the test.The LF/HF-VHF ratio increased at the start,later falling progressively until the end of the first phase and remaining around minimal values until the end of the test.展开更多
基金supported by the Natural Science Foundation of China(No.51675230)the Major Innovation Projects in Shandong Province (No. 2019JZZY010451)。
文摘Using the devices of split Hopkinson tension bar(SHTB)and split Hopkinson pressure bar(SHPB),the dynamic tension and compression experiments in three typical forming directions(rolling direction(RD),transverse direction(TD)and normal direction(ND))were carried out at strain rates of 1000,2000 and 4000 s-1,respectively.From the microscopic point of view,the effect of strain rate and anisotropy on tension compression asymmetry of aviation aluminum alloy 7050 was studied by scanning electron microscope(SEM),metallographic microscope and electron backscatter diffraction(EBSD).The results showed that there was obvious asymmetry between tension and compression,especially that the yield strength of the material in tension was higher than that in compression.The asymmetry in the elastic stage of tension-compression was weaker and the asymmetry in the strengthening stage was stronger with the increase of strain rate.At the same strain rate,the changing trend of the flow stress was distinct under different orientations of tension and compression,which was related to the stress direction of the grains.According to EBSD grain orientation analysis and raw material texture pole figure analysis,it was found that the larger the difference in the degree of grain refinement during tension and compression,the larger the macro-flow stress difference.
文摘The aim of this paper is to describe and analyse the behaviour of heart rate variability(HRV)during constant-load,high-intensity exercise using a time frequency analysis(Wavelet Transform).Eleven elite cyclists took part in the study(age:18.6±3.0 years;VO_(2max):4.88±0.61 litres·min^(-1)).Initially,all subjects performed an incremental cycloergometer test to determine load power in a constant load-test(379.55±36.02 W;89.0%).HRV declined dramatically from the start of testing(p<0.05).The behaviour of power spectral density within the LF band mirrored that of total energy,recording a significant decrease from the outset LF peaks fell rapidly thereafter,remaining stable until the end of the test.HF-VHF fell sharply in the first 20 to 30 seconds.The relative weighting(%) of HF-VHF was inverted with the onset of fatigue,[1.6%at the start,7.1(p<0.05) at the end of the first phase,and 43.1%(p<0.05) at the end of the test].HF-VHF_(peak) displayed three phases:a moderate initial increase,followed by a slight fall,thereafter increasing to the end of the test.The LF/HF-VHF ratio increased at the start,later falling progressively until the end of the first phase and remaining around minimal values until the end of the test.
