The Al−Mg alloy with high Mg addition(Al−9.2Mg−0.8Mn−0.2Zr-0.15Ti,in wt.%)was subjected to different passes(1,2 and 4)of high strain rate rolling(HSRR),with the total thickness reduction of 72%,the rolling temperature...The Al−Mg alloy with high Mg addition(Al−9.2Mg−0.8Mn−0.2Zr-0.15Ti,in wt.%)was subjected to different passes(1,2 and 4)of high strain rate rolling(HSRR),with the total thickness reduction of 72%,the rolling temperature of 400℃and strain rate of 8.6 s^(−1).The microstructure evolution was studied by optical microscope(OM),scanning electron microscope(SEM),electron backscattered diffraction(EBSD)and transmission electron microscope(TEM).The alloy that undergoes 2 passes of HSRR exhibits an obvious bimodal grain structure,in which the average grain sizes of the fine dynamic recrystallization(DRX)grains and the coarse non-DRX regions are 6.4 and 47.7mm,respectively.The high strength((507±9)MPa)and the large ductility((24.9±1.3)%)are obtained in the alloy containing the bimodal grain distribution.The discontinuous dynamic recrystallization(DDRX)mechanism is the prominent grain refinement mechanism in the alloy subjected to 2 passes of HSRR.展开更多
Effects of the sole and the combined addition of Ca and Sr on microstructure and mechanical properties of as-cast and as-rolled Mg-5 Zn alloys were carefully investigated by OM,SEM,hot-compression testing and tensile ...Effects of the sole and the combined addition of Ca and Sr on microstructure and mechanical properties of as-cast and as-rolled Mg-5 Zn alloys were carefully investigated by OM,SEM,hot-compression testing and tensile testing.Ca is more effective than Sr in the microstructural refinement of as-cast alloys.High-strain-rate rolling(HSRR)produces more deformed twins and thus provides more nucleation sites for dynamic recrystallization(DRX).The addition of Ca and Sr can promote dynamic precipitation during HSRR,the precipitation process would consume the storage energy and thus increases the critical strain value of DRX,resulting in the retarded DRX effect by the addition of Ca and/or Sr.The as-rolled Mg-5 Zn-0.4 Ca-0.2 Sr alloy exhibits a good combination of strength and ductility,with the ultimate tensile strength of 317 MPa,the yield strength of 235 MPa and the elongation to rupture of 24%.展开更多
文摘The Al−Mg alloy with high Mg addition(Al−9.2Mg−0.8Mn−0.2Zr-0.15Ti,in wt.%)was subjected to different passes(1,2 and 4)of high strain rate rolling(HSRR),with the total thickness reduction of 72%,the rolling temperature of 400℃and strain rate of 8.6 s^(−1).The microstructure evolution was studied by optical microscope(OM),scanning electron microscope(SEM),electron backscattered diffraction(EBSD)and transmission electron microscope(TEM).The alloy that undergoes 2 passes of HSRR exhibits an obvious bimodal grain structure,in which the average grain sizes of the fine dynamic recrystallization(DRX)grains and the coarse non-DRX regions are 6.4 and 47.7mm,respectively.The high strength((507±9)MPa)and the large ductility((24.9±1.3)%)are obtained in the alloy containing the bimodal grain distribution.The discontinuous dynamic recrystallization(DDRX)mechanism is the prominent grain refinement mechanism in the alloy subjected to 2 passes of HSRR.
基金Projects(51471066,51571089) supported by the National Natural Science Foundation of ChinaProject(2019JJ40044) supported by the Natural Science Foundation of Hunan Province,China
文摘Effects of the sole and the combined addition of Ca and Sr on microstructure and mechanical properties of as-cast and as-rolled Mg-5 Zn alloys were carefully investigated by OM,SEM,hot-compression testing and tensile testing.Ca is more effective than Sr in the microstructural refinement of as-cast alloys.High-strain-rate rolling(HSRR)produces more deformed twins and thus provides more nucleation sites for dynamic recrystallization(DRX).The addition of Ca and Sr can promote dynamic precipitation during HSRR,the precipitation process would consume the storage energy and thus increases the critical strain value of DRX,resulting in the retarded DRX effect by the addition of Ca and/or Sr.The as-rolled Mg-5 Zn-0.4 Ca-0.2 Sr alloy exhibits a good combination of strength and ductility,with the ultimate tensile strength of 317 MPa,the yield strength of 235 MPa and the elongation to rupture of 24%.
