Shuangyou 092, a Brassica napus cultivar with high oil content, high quality and high yield, was bred by Institute of Industrial Crops of Henan Academy of Agricultural Sciences with Zhongshuang 9 as female parent, and...Shuangyou 092, a Brassica napus cultivar with high oil content, high quality and high yield, was bred by Institute of Industrial Crops of Henan Academy of Agricultural Sciences with Zhongshuang 9 as female parent, and the cytoplasmic male sterility maintainer line 32B as male parent. It was registered and released in 2014. The average yield was 2 858.5 kg/hm^2 in Henan province regional test of high quality, 12.43% higher than the check variety Fengyou 9 in 2010-2011 and 2011-2012. Its yield was 3 478.8 kg/ha in Henan Province productive test of high quality,9.52% higher than the check variety Fengyou 9 in 2012-2013. According to the test results in 2011-2012 and 2012-2013, the seeds quality of Shuangyou 092 was very good with near zero erucic acid （0.0%, 0.1%） in fat acid, 17.19 μmol/g and 19.78 μmol/g glucosinolates in its meal, the oil content of 46.60% and 45.76%. The cultivar was resistant （tolerant） to Sclerotinia, virus diseases, cold, and lodging. Its high yield and high quality can be obtained by planting in large scale, sowing at right time, rational close planting, balancing fertilizer and harvesting at right time.展开更多
A silicone oil emulsion with 60% of solid content was prepared with methyl silicone oil used as the main material by means of the emulsifier-in-oil method.The influence of emulsification conditions on the droplet diam...A silicone oil emulsion with 60% of solid content was prepared with methyl silicone oil used as the main material by means of the emulsifier-in-oil method.The influence of emulsification conditions on the droplet diameter of silicone oil emulsion was discussed.The experimental results showed that the emulsification method,including the quantity of the emulsifier,the time and temperature of emulsification,the emulsifying water dosage,and the stirring speed,had significant impact on the droplet size.The optimal conditions were identified to achieve a smallest droplet diameter of the emulsion at an emulsifier dosage of 6%,an emulsification temperature of 70 ℃,an emulsification time of 30 min,and a stirring speed of 1100 r/min,with water added in two portions at a ratio of 1:1.The high-solid content silicone oil emulsion with a mean droplet diameter of 2.731 μm was prepared under these conditions that could ensure absence of stratification and floating oil under centrifuging at a speed of 3000 r/min for 30 min.展开更多
In this study,we propose a new method for water holdup measurement of oil-in-water emulsions with a microwave resonance sensor(MRS).The angle and length of the electrode plate are optimized by HFSS simulation software...In this study,we propose a new method for water holdup measurement of oil-in-water emulsions with a microwave resonance sensor(MRS).The angle and length of the electrode plate are optimized by HFSS simulation software.Using a vector network analyzer(VNA),a static calibration experiment is conducted,and the resonant frequency distribution of oil-in-water emulsions is analyzed within an 80%–100%water holdup range.In addition,we observe and analyze the micron-sized oil bubble structure in the emulsifi ed state with an optical microscope.On this basis,a dynamic experiment of oil-in-water emulsions with high water cut and low velocity in a vertical upward pipe is conducted.S_(21) response curves of the MRS are obtained by the VNA under diff erent working conditions in real time.Finally,we analyze the relationship between the resonant frequency and water cut.Experimental results show that the MRS has an average resolution of 0.096%water cut for high water cut oil-in-water emulsions within the frequency range of 2.2–2.8 GHz.展开更多
Weathered clastic crust can be subdivided into weathered clay and leached zone in terms of variable weathering of different minerals and mobility of weathered products.On the basis of clastic outcrops and well cores i...Weathered clastic crust can be subdivided into weathered clay and leached zone in terms of variable weathering of different minerals and mobility of weathered products.On the basis of clastic outcrops and well cores in the Junggar Basin,the dark red Fe-rich weathered clay is formed in an arid environment,whereas the light blue Al-rich weathered clay under humid conditions.According to the geochemical analysis,a new weathering index for weathered clastic crust is built mainly on Fe and Al contents,accurately indicating the weathered clay,sandy leached zone,and muddy leached zone in the Junggar Basin.The breaking pressure of weathered clay is rather large,the same as that of normal muddy cap,effectively to seal oil or gas.The porosity of underlying leached zone is greatly enhanced by weathering and leaching,but its permeability is a function of clay mineral content,i.e.,the higher the clay content,the worse the permeability.Weathered crust provides effective sealing conditions for both top and bottom layers of a petroleum reservoir,and is important in the clastic hydrocarbon exploration.展开更多
文摘Shuangyou 092, a Brassica napus cultivar with high oil content, high quality and high yield, was bred by Institute of Industrial Crops of Henan Academy of Agricultural Sciences with Zhongshuang 9 as female parent, and the cytoplasmic male sterility maintainer line 32B as male parent. It was registered and released in 2014. The average yield was 2 858.5 kg/hm^2 in Henan province regional test of high quality, 12.43% higher than the check variety Fengyou 9 in 2010-2011 and 2011-2012. Its yield was 3 478.8 kg/ha in Henan Province productive test of high quality,9.52% higher than the check variety Fengyou 9 in 2012-2013. According to the test results in 2011-2012 and 2012-2013, the seeds quality of Shuangyou 092 was very good with near zero erucic acid （0.0%, 0.1%） in fat acid, 17.19 μmol/g and 19.78 μmol/g glucosinolates in its meal, the oil content of 46.60% and 45.76%. The cultivar was resistant （tolerant） to Sclerotinia, virus diseases, cold, and lodging. Its high yield and high quality can be obtained by planting in large scale, sowing at right time, rational close planting, balancing fertilizer and harvesting at right time.
文摘A silicone oil emulsion with 60% of solid content was prepared with methyl silicone oil used as the main material by means of the emulsifier-in-oil method.The influence of emulsification conditions on the droplet diameter of silicone oil emulsion was discussed.The experimental results showed that the emulsification method,including the quantity of the emulsifier,the time and temperature of emulsification,the emulsifying water dosage,and the stirring speed,had significant impact on the droplet size.The optimal conditions were identified to achieve a smallest droplet diameter of the emulsion at an emulsifier dosage of 6%,an emulsification temperature of 70 ℃,an emulsification time of 30 min,and a stirring speed of 1100 r/min,with water added in two portions at a ratio of 1:1.The high-solid content silicone oil emulsion with a mean droplet diameter of 2.731 μm was prepared under these conditions that could ensure absence of stratification and floating oil under centrifuging at a speed of 3000 r/min for 30 min.
基金supported by the National Natural Science Foundation of China(Grant Nos.42074142 and 51527805)。
文摘In this study,we propose a new method for water holdup measurement of oil-in-water emulsions with a microwave resonance sensor(MRS).The angle and length of the electrode plate are optimized by HFSS simulation software.Using a vector network analyzer(VNA),a static calibration experiment is conducted,and the resonant frequency distribution of oil-in-water emulsions is analyzed within an 80%–100%water holdup range.In addition,we observe and analyze the micron-sized oil bubble structure in the emulsifi ed state with an optical microscope.On this basis,a dynamic experiment of oil-in-water emulsions with high water cut and low velocity in a vertical upward pipe is conducted.S_(21) response curves of the MRS are obtained by the VNA under diff erent working conditions in real time.Finally,we analyze the relationship between the resonant frequency and water cut.Experimental results show that the MRS has an average resolution of 0.096%water cut for high water cut oil-in-water emulsions within the frequency range of 2.2–2.8 GHz.
基金supported by National Science and Technology Major Projects(Grant No.2011ZX05001-003)
文摘Weathered clastic crust can be subdivided into weathered clay and leached zone in terms of variable weathering of different minerals and mobility of weathered products.On the basis of clastic outcrops and well cores in the Junggar Basin,the dark red Fe-rich weathered clay is formed in an arid environment,whereas the light blue Al-rich weathered clay under humid conditions.According to the geochemical analysis,a new weathering index for weathered clastic crust is built mainly on Fe and Al contents,accurately indicating the weathered clay,sandy leached zone,and muddy leached zone in the Junggar Basin.The breaking pressure of weathered clay is rather large,the same as that of normal muddy cap,effectively to seal oil or gas.The porosity of underlying leached zone is greatly enhanced by weathering and leaching,but its permeability is a function of clay mineral content,i.e.,the higher the clay content,the worse the permeability.Weathered crust provides effective sealing conditions for both top and bottom layers of a petroleum reservoir,and is important in the clastic hydrocarbon exploration.
