期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
铸态Ti40阻燃钛合金高温拉伸力学性能及断裂行为研究 被引量:5
1
作者 舒滢 黄张洪 +2 位作者 彭雯雯 曾卫东 赵永庆 《材料导报》 EI CAS CSCD 北大核心 2014年第20期84-87,98,共5页
研究了不同试验温度下铸态Ti40合金的高温拉伸力学性能变化规律,并采用光学显微镜和扫描电子显微镜对拉伸样断口形貌进行观测,确定其断裂机制。结果表明:合金的抗拉强度随着试验温度的升高而显著下降,而塑性则分别表现出两个塑性较... 研究了不同试验温度下铸态Ti40合金的高温拉伸力学性能变化规律,并采用光学显微镜和扫描电子显微镜对拉伸样断口形貌进行观测,确定其断裂机制。结果表明:合金的抗拉强度随着试验温度的升高而显著下降,而塑性则分别表现出两个塑性较优区和脆性区,即400℃以下低温和900-1000℃高温的较好塑性区以及500-800℃的热脆区和1000℃以上的高温脆性区。脆性区试样断口形貌均呈现为沿晶脆性断裂,这一断裂机制与合金粗大晶粒以及严重的氧化相关。高温塑性区断口形貌为穿晶韧性断裂,则合金具有较高的塑性和较低的变形抗力,可作为较好的热加工温度区间。 展开更多
关键词 铸态Ti40合金 高温拉伸力学性能 断裂行为
下载PDF
Microstructure and creep properties of Mg-4Al-2Sn-1(Ca,Sr) alloys 被引量:4
2
作者 B.H.KIM K.C.PARK +1 位作者 Y.H.PARK I.M.PARK 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2010年第7期1184-1191,共8页
The effects of Ca and Sr addition on the microstructure and creep properties of Mg-4Al-2Sn alloys were examined. Tensile tests at 25 ℃ and 200 ℃ and creep tests at 150 ℃ and 200 ℃ were carried out to estimate the ... The effects of Ca and Sr addition on the microstructure and creep properties of Mg-4Al-2Sn alloys were examined. Tensile tests at 25 ℃ and 200 ℃ and creep tests at 150 ℃ and 200 ℃ were carried out to estimate the room temperature and high temperature mechanical properties of these alloys. The microstrueture of the Mg-4Al-2Sn alloy showed dendritic a-Mg, Mg17Al12 and Mg2Sn phases. The latter two phases precipitated along the grain boundaries. The addition of Ca and Sr resulted in the formation of ternary CaMgSn and SrMgSn phases within the grain. The grain size was reduced slightly with the addition of Sr and Ca. The tensile strength was decreased by the addition of Ca and Sr at room temperature. However, the high temperature tensile strength was increased. The creep strength was improved by the addition of Ca and Sr. 展开更多
关键词 magnesium alloys CA SR void initiation mechanical properties creep mechanism
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部