期刊文献+
共找到13篇文章
< 1 >
每页显示 20 50 100
高温液相色谱的原理及研究进展 被引量:10
1
作者 富玉 陈能武 《中国测试技术》 2007年第3期36-40,共5页
高温液相色谱是色谱发展的一个新领域。温度升高,流动相的粘度降低,分析物的扩散速度加快,则溶质及溶剂的传质阻力降低,可实现在较高的流速下分离,同时系统的压力会随着温度的升高而降低。升高色谱柱的温度,不仅可以加快分析速度,而且... 高温液相色谱是色谱发展的一个新领域。温度升高,流动相的粘度降低,分析物的扩散速度加快,则溶质及溶剂的传质阻力降低,可实现在较高的流速下分离,同时系统的压力会随着温度的升高而降低。升高色谱柱的温度,不仅可以加快分析速度,而且还可以改善峰形,减少有机溶剂的使用。在此基础上发展出的亚临界水色谱,更符合绿色色谱的要求,同时扩大了液相色谱的应用范围。本文综述了高温条件下,温度对柱效、保留值、选择性、溶剂洗脱特征及色谱柱稳定性的影响,介绍了高温色谱的应用进展。 展开更多
关键词 高温液相色谱 柱效 选择性 温度梯度 柱稳定性
下载PDF
某些酚类的高温液相色谱行为
2
作者 富玉 宋瑞娟 +2 位作者 石宏宇 龙远德 黄天宝 《分析化学》 SCIE EI CAS CSCD 北大核心 2007年第5期727-730,共4页
建立了高温液相色谱系统,在高温条件下,采用甲醇-水作为流动相,在Polymerx RP-1聚合物(PS-DVB)色谱柱上考察了6种酚类样品的色谱行为。实验条件:温度40~160℃,流速0.2~5.5mL/min,流动相中甲醇浓度范围40%~80%。考察了温度、流速和流... 建立了高温液相色谱系统,在高温条件下,采用甲醇-水作为流动相,在Polymerx RP-1聚合物(PS-DVB)色谱柱上考察了6种酚类样品的色谱行为。实验条件:温度40~160℃,流速0.2~5.5mL/min,流动相中甲醇浓度范围40%~80%。考察了温度、流速和流动相组成对酚类样品的保留、分辨、柱效和系统压力的影响,探讨了酚类样品在聚合物柱上的热力学行为。温度升高2.35℃大约相当于流动相中甲醇浓度增加1%,可以通过改变色谱柱温度调节样品保留和改变选择性。柱温升高,降低了流动相的粘度,允许在高温条件下使用较高的流速实现快速分离。在160℃、V(甲醇)∶V(水)=40∶60,为流动相和3mL/min流速条件下,可于2.5min内实现6种酚类的完全分离。 展开更多
关键词 高温液相色谱 酚类 热力学 保留 柱效
下载PDF
高温液相色谱仪器系统概述
3
作者 成洪达 邢占芬 郑艳 《广州化工》 CAS 2009年第3期147-149,156,共4页
高温液相色谱(HTLC)是液相色谱发展的一个重要方向,HTLC通过调节色谱分析的温度,不仅可以加快分析速度、提高分离效率,而且还可以改善峰形、调节选择性。概述了高温液相色谱关于固定相的选择、流动相的洗脱特征和检测器的选择情况,介绍... 高温液相色谱(HTLC)是液相色谱发展的一个重要方向,HTLC通过调节色谱分析的温度,不仅可以加快分析速度、提高分离效率,而且还可以改善峰形、调节选择性。概述了高温液相色谱关于固定相的选择、流动相的洗脱特征和检测器的选择情况,介绍了高温液相色谱的应用前景。 展开更多
关键词 高温液相色谱 HTLC 综述
下载PDF
色谱分析的新领域—高温液相色谱 被引量:12
4
作者 刘光会 《天然气化工—C1化学与化工》 CAS CSCD 北大核心 2000年第6期46-52,共7页
升高柱温是提高液相色谱分离效果的有效手段。在高温液相色谱 (HTLC)条件下 ,可以同时实现气相色谱的高分离效率和液相色谱的高选择性。介绍了HTLC技术国内外发展情况和主要研究成果。
关键词 高温液相色谱 分析 理论塔板 分离效率
全文增补中
高温液相色谱法在中药成分检测中的应用
5
作者 王远 《黑龙江环境通报》 2014年第4期51-55,共5页
采用高温操作,对六味地黄丸的有效成分进行了分析。当柱温提高到60℃时,采用黏度大而洗脱能力强的异丙醇混合物为流动相,分离时间比升温前缩短30 min;总峰数目为83,其中紫外检测器可识别峰个数为65,蒸发光散射检测器可识别峰个数为59。
关键词 高温液相色谱 串联检测器 中药 六味地黄丸
下载PDF
快速高效液相色谱分离技术在中药分析中的应用 被引量:23
6
作者 刘颖 周建良 李萍 《色谱》 CAS CSCD 北大核心 2009年第5期682-689,共8页
中药化学成分分析是中药药效物质阐明及质量控制的关键问题之一。由于中药化学成分的复杂性,中药成分分析一直存在着分离难度大、分析时间长等问题。为此,针对这些问题发展起来的快速、高效液相色谱技术(主要包括超高压液相色谱、基于... 中药化学成分分析是中药药效物质阐明及质量控制的关键问题之一。由于中药化学成分的复杂性,中药成分分析一直存在着分离难度大、分析时间长等问题。为此,针对这些问题发展起来的快速、高效液相色谱技术(主要包括超高压液相色谱、基于整体柱的高效液相色谱和高温液相色谱)备受关注。本文结合本实验室近年的研究,对该技术在中药复杂体系化学成分分析中的应用做简要综述,内容主要包括这些技术的原理、分离性能及其在中药复杂体系中的应用。 展开更多
关键词 快速高效液相 超高压液相 整体柱高效液相 高温液相色谱 中药分析
下载PDF
用于高温毛细管柱液相色谱激光散射检测器的改进
7
作者 Torone,R 傅若龙 《国外分析仪器技术与应用》 2001年第4期33-36,共4页
本文阐述了对高温液相色谱仪光蒸发散射器的改进,自制雾化器与雾化器加热系统连成一体,消除了信号波动问题。雾化器线性大大改善,可达lng。对Irganox3114的检测限小于lng。
关键词 ELSD 毛细管雾化器 填充毛细管 高温液相色谱
下载PDF
色谱技术的分析比较及其新发展趋势 被引量:3
8
作者 孙建琴 《凯里学院学报》 2009年第6期41-44,共4页
对各种色谱技术进行分析比较.指出GC对于可分析化合物的要求较高,因此分析选择性范围小,但其效率高、分析速度快;而HPLC由于其溶质在液相中的传质阻力较高,因此分离效率较差,但其选择性好;高温液相色谱(HTLC)既达到了气相色谱的高效率,... 对各种色谱技术进行分析比较.指出GC对于可分析化合物的要求较高,因此分析选择性范围小,但其效率高、分析速度快;而HPLC由于其溶质在液相中的传质阻力较高,因此分离效率较差,但其选择性好;高温液相色谱(HTLC)既达到了气相色谱的高效率,又保持了液相色谱选择性好的特点.展望色谱分析领域的新发展. 展开更多
关键词 气相(GC ) 高效液相(HPLC) 高温液相色谱(HTLC)
下载PDF
The Stability of Endomorphin-1 Solution
9
作者 刘晖 杨顶建 +1 位作者 倪京满 王锐 《Journal of Chinese Pharmaceutical Sciences》 CAS 2003年第3期131-134,共4页
Aim To study the most stable pH value of endomorphin-1 solution and toestimate the shelf-life of EM-1 solution. Methods The content of EM-1 in its solution was determinedby HPLC, and stability was studied by accelerat... Aim To study the most stable pH value of endomorphin-1 solution and toestimate the shelf-life of EM-1 solution. Methods The content of EM-1 in its solution was determinedby HPLC, and stability was studied by accelerated tests. Results The most stable pH value of EM-1solution was observed. By the accelerated tests we obtained the Arrhe-nius relationship and thepharmacokinetic parameters. Conclusion The most stable pH value of EM-1 solution is 4.5 -4.8. Thet_(1/2)(25℃) is 45 d. 展开更多
关键词 ENDOMORPHIN-1 most stable pH value accelerated tests HPLC
下载PDF
Determination of fermentable sugar in wort made from degermed corn extruded at low temperature as beer adjunct by HPLC
10
作者 CHEN Bing LI Hui-min +1 位作者 LIU Xiu-hua LI Hong-jun 《Chinese Food Science》 2012年第3期27-29,共3页
[Objective] To accurately determine the components and content of fermentable sugars in wort. [Method] The components and content of fermentable sugars in wort made from degermed corn extruded at low temperature as be... [Objective] To accurately determine the components and content of fermentable sugars in wort. [Method] The components and content of fermentable sugars in wort made from degermed corn extruded at low temperature as beer adjunct were determined by HPLC. [Result] The contents of sugar components were shown as below: fructose was 3.8 g/L, glucose was 7.4 g/L, sucrose was 4.2 g/L, maltose was 53.8 g/L and maltotriose was 10.6 g/L.The content of the five fermentable sugars had good linear relation within their peak area in the determination range, the correlation coefficient was 0.977 6-0.990 7, the recoveries of samples were >96%, the standard deviation was 1.27%-3.26%. [Conclusion] The method is simple and rapid with high sensitivity and good reproducibility, it provides reliable and accurate analytic method for determining the components of fermentable sugars in wort made from degermed corn extruded at low temperature as beer adjunct. 展开更多
关键词 EXTRUSION Degermed corn WORT HPLC Fermentable sugars
下载PDF
Variations of DON Content in Grain during Wheat Tempering at Different Temperatures
11
作者 Zhiming GENG Dan YANG +5 位作者 Pingping ZHANG Miaoping ZHOU Daoying WANG Fang LIU Muhan ZHANG Yongzhi ZHU 《Agricultural Science & Technology》 CAS 2014年第4期546-549,共4页
[Objective] The aim of this study was to observe variations of DON content in grain of two wheat cultivars during tempering at different temperatures, and explore the possible causes of the variations. [Method] Two na... [Objective] The aim of this study was to observe variations of DON content in grain of two wheat cultivars during tempering at different temperatures, and explore the possible causes of the variations. [Method] Two naturally Fusarium-infested wheat samples Youmai 3 and Yangmai 14 were selected as experimental materials. Tempering was carried out at different temperature (15, 25 and 35 ℃) for 48 h. During tempering, wheat grain samples were collected every 8 h. DON contents in tempered grain were measured by HPLC coupled with UV detector. [Result] For Youmai 3, DON contents were in the ranges of 3.94-12.49, 4.26-6.11 and 3.41- 7.91 μg/g during tempering at 15, 25 and 35 ℃, respectively. The highest DON contents were observed at the 32^nd hour at 15 ℃, the 8^th hour at 25 ℃ and the 32^rd hour at 35 ℃, respectively. After tempering for 48 h, DON contents in grain were increased by 175.1%, 27.5% and 7.2%, respectively. For Yangmai 14, DON contents were in the ranges of 0.55-1.56, 0.39-0.77 and 0.57-3.17 μg/g during tempering at 15, 25 and 35 ℃, respectively. The highest DON contents were ob- served at the 24^th hour at 15 ℃, the 40^th hour at 25 ℃ and the 48^th hour at 35 ℃, respectively. After tempering for 48 h, DON contents in grain were increased by 94.5% at 15 ℃ and 456.1% at 35 ℃, respectively, whereas it was decreased by 35.0% at 25 ℃. From the point of view of reducing DON level, 15 ℃ was not rea- sonable for the tempering of both wheat cultivars, and tempering at 35 ℃ for 16 h and tempering at 25 ℃ for 24 h appeared to be desirable for Youmai 3 and Yang- mai 14, respectively. [Conclusion] The results suggested controlling the tempering temperature and time would be helpful to reduce DON level in grain. 展开更多
关键词 FUSARIUM DEOXYNIVALENOL CEREALS Wheat tempering
下载PDF
Extraction and Powder Product of Fructo-oligosaccharide from Jerusalem Artichoke
12
作者 Winus Puminat Chowladda Teangpook 《Journal of Food Science and Engineering》 2013年第3期141-148,共8页
Fructo-oligosaccharide (FOS) is a type of dietary fiber. It can not be digested by enzymes in the body. It also helps to improve a digestion in the intestine, an excretion system and prevent the cancer. Jerusalem ar... Fructo-oligosaccharide (FOS) is a type of dietary fiber. It can not be digested by enzymes in the body. It also helps to improve a digestion in the intestine, an excretion system and prevent the cancer. Jerusalem artichoke is scanned and analyzed by High Performance Liquid Chromatography (HPLC) for quantity of FOS. They are selected for extraction and drying process. Studies on the extraction for a powder making, the conditions are optimum for maximum yield. Experiments manage using a factorial real 2 × 4 × 6 in 2 blocks of Randomized Complete Block Design (RCBD) models. The first factor studies on two types of solvent. The second factor is the four levels of temperature in the extraction with water at 25 ℃, 35 ℃, 50℃ and 60℃ for 30 min. The third factor is the ratio of sample per solvent as 5, 6, 10, 15, 20 and 30 times. The data and comparison of average is analyzed by Duncan's New Mutiple Range Test at the significant level 0.05. The concentrated extracts are processed to powder by freeze drying, a hot air and vacuum drying. Optimal conditions control the temperature and time by heating in both vacuum and conventional oven. The results of temperature on the extraction are significantly different at a = 0.05. In drying process with high temperature, the color of product is more yellow (b) and less white (L). The difference of color value is statistically significant at level a = 0.05. The sensory evaluation of food products are added the extracted powder and attribute by panelist. High level acceptance of product is aspectual about texture and flavor. FOS is the trend of functional foods for health. It is focus on low energy and on obesity including increasing the absorption of calcium. 展开更多
关键词 Fruto-oligosaccharide FRUCTAN Jerusalem artichoke HPLC
下载PDF
Borstar双峰聚合反应产品性质分析及模型建立 被引量:1
13
作者 赵晓军 郭晓军 +2 位作者 黄飞 徐心茹 杨敬一 《计算机与应用化学》 CAS CSCD 北大核心 2012年第5期561-566,共6页
通过对Borstar双峰聚合反应过程产品性质实验分析,Borstar双峰聚乙烯技术超临界环管反应器生产聚合物熔融指数相对于分子量呈指数规律变化,气相反应器生产的聚合物熔融指数随分子量增加而呈一定规律的减少,聚合物分子量继续增加聚合物... 通过对Borstar双峰聚合反应过程产品性质实验分析,Borstar双峰聚乙烯技术超临界环管反应器生产聚合物熔融指数相对于分子量呈指数规律变化,气相反应器生产的聚合物熔融指数随分子量增加而呈一定规律的减少,聚合物分子量继续增加聚合物熔融指数减少趋势缓慢;在实验分析的基础上,基于聚合反应机理应用MATLAB软件建立工业装置聚合过程聚乙烯熔融指数及密度等产品性质计算模型和确定模型参数,通过模型拟合值和实际值的比较,模型能够准确预测熔融指数和密度的变化趋势,有关聚乙烯在环管中的熔融指数、在流化床内的熔融指数和密度的质量模型相对平均误差分别为2.4%,0.5%和0.3%。通过产品质量预测模型的推导和分析,环管部分熔融指数主要受温度、[H2]/[C2H4]影响;而气相部分熔融指数既受环管聚合物来料性质影响。 展开更多
关键词 高温液相凝胶 熔融指数 双峰聚乙烯 模型
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部