The tolerance of a restorer line R1056 of rice and its hybrid combinations to high temperature at flowering stage was evaluated by sowing them at three dif- ferent dates and transplanting them into a greenhouse equipp...The tolerance of a restorer line R1056 of rice and its hybrid combinations to high temperature at flowering stage was evaluated by sowing them at three dif- ferent dates and transplanting them into a greenhouse equipped with heating system at flowering stage. Several important agronomic traits of these rice varieties or combinations were also measured. The results revealed that treated by high temper- ature （38 ℃） at flowering stage, the seed setting rate （70.4%）, percentage of dehis- cent anthers （75.5%）, and pollen number per floret （78） of R1056 were close to those of N22, which is tolerant to high temperature, and significantly higher than those of the rice varieties sensitive to high temperature. The seed setting rate, per- centage of dehiscent anthers, and pollen number per floret of the hybrid combina- tions generated from R1056 were smaller than those of R1056, but higher than those of the rice varieties sensitive to high temperature. R1056 had excellent agro- nomic traits, and good combining ability, and its hybrid combinations had low plant height, numerous panicles and high yield, suggesting that R1056 is not only an ex- cellent rice variety with tolerance to high temperature, but also an excellent restorer in three-line hybrid rice breeding.展开更多
Two heat-tolerant rice varieties, N5 and TQ, were chosen as test materi- als. Specifically, rice seedlings （leaf age at 2.1）, cultivated in room, were treated at 40 ℃ for 7 d and some indices were measured, includi...Two heat-tolerant rice varieties, N5 and TQ, were chosen as test materi- als. Specifically, rice seedlings （leaf age at 2.1）, cultivated in room, were treated at 40 ℃ for 7 d and some indices were measured, including plant height, dry weight, leaf color, proline, malondialdehyde and conductivity. The results showed that high temperature advanced the growth of N5 seedlings, for example, plant height, root length and dry weight of ground parts all increased. However, high temperature prevented TQ seedlings growth, plant height in particular. Furthermore, high temper- ature treatment increased the content of chlorophyll of N5 and had none effects on PSII of N5, with little damages on membrane system. On the other hand, high temperature actually reduced PSII activity of TQ, and seriously damaged TQ mem- brane system. It is speculated that the differences of the two varieties lie on pro- duction or removing capacity of reactive oxide species.展开更多
[Objective] Mononychellus tanajoa is a mite speices recently invaded into China in 2008. Temperature is one of the most important ecological factors affecting the growth and reproduction of M. tanajoa. The objective o...[Objective] Mononychellus tanajoa is a mite speices recently invaded into China in 2008. Temperature is one of the most important ecological factors affecting the growth and reproduction of M. tanajoa. The objective of the current study was to reveal the effects of high temperature incubation on the activities of some protective enzymes in M. tanajoa at different growth stages. The results would contribute to the understanding of the adaptable distribution of M. tanajoa after its invasion into China, the mechanisms in its invasion, diffusion and ecological adaptation, and the monitor- ing, early warning and effective prevention of its damage. [Method] Six protective enzymes, Le. polyphenol oxidase （PPO）, peroxidase （POD）, ascorbate oxidase （AsA- POD）, catalase （CAT）, superoxide dismutase （SOD） and esterase （EST）, were cho- sen to study their activities after the mites at different growth stages were incubated at a extremely high temperature of 42 ~C for a certain period of time up to 24 h. The activities were measured by spectrophotometric endpoint assay method. [Results] Enzyme activities in M. tanajoa were affected by the high temperature incubation. However, differences in enzyme activity changes were found among different protec- tive enzymes and among different growth stages of M. tanajoa. Activities of PPO, POD, AsA-POD and CAT were significantly increased in the larval mites and female adult mites of M. tanajoa. CAT activity was significantly decreased in protonymph and deutonymph of M. tanajoa. Activities of PPO, POD and AsA-POD in protonymph and deutonymph showed no obvious difference from the control. [Conclusion] The activity changes of some protective enzymes in M. tanajoa following high-temperature treatment are part of its anti-stress reaction mechanism. In mite protonymph and deutonymph, activities of PPO, POD and AsA-POD are similar to the untreated con- trol which may be associated with the thermostability of M. tanajoa. It is concluded that, the long-time stress of extreme temperature may result in the increase of the thermostability of mite individuals, the enhancement of the population thermal stability and subsequently lead to rapid expansion of the population.展开更多
In order to improve corrosion resistance of stainless steel 316L in warm acidic solution, Ni？Cu？P coatings with high copper and phosphorus contents were deposited onto stainless steel 316L substrates via electroless...In order to improve corrosion resistance of stainless steel 316L in warm acidic solution, Ni？Cu？P coatings with high copper and phosphorus contents were deposited onto stainless steel 316L substrates via electroless plating. The structure of the film and its resistance to corrosion in a warm acidic environment were investigated using scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS）, X-ray diffraction spectrometry （XRD）, polarization curves, electrochemical impedance spectroscopy （EIS）, and dipping corrosion tests, respectively. The results demonstrate that Ni？Cu？P coatings consist of two types of nodules, which are 19.98% Cu and 39.17% Cu （mass fraction） respectively. The corrosion resistance of the 316L substrate when subjected to a warm acidic solution is significantly improved by the addition of the new type of the Ni？Cu？P coating. The as-plated coatings demonstrate better corrosion resistance than annealed coatings. As-plated coatings and those annealed at 673 K are found to corrode selectively, while pitting is observed to be the main corrosion mechanism of coatings annealed at 773 and 873 K.展开更多
The evolution of morphology, composition, thickness and corrosion resistance of the oxide film on pure Sn solder substrate submitted to high-temperature aging in 150 °C dry atmosphere was investigated. The result...The evolution of morphology, composition, thickness and corrosion resistance of the oxide film on pure Sn solder substrate submitted to high-temperature aging in 150 °C dry atmosphere was investigated. The results indicate that high-temperature aging accelerates the dehydration of Sn(OH)_(4)in the pre-existing native oxide film to form SnO_(2)and facilitates the oxidation of fresh Sn substrate, resulting in the gradual increase in oxide film thickness and surface roughness with prolonging aging time. However, the corrosion resistance of the film initially is enhanced and then deteriorated with an extending aging time. Besides, the formation and evolution mechanisms of the oxide film with aging time were discussed.展开更多
Researches about synthesis and modification of nylon 10T(PA10T)in domestic universities and scientific research institutions are reviewed in this paper.The results show that,due to the different performance requiremen...Researches about synthesis and modification of nylon 10T(PA10T)in domestic universities and scientific research institutions are reviewed in this paper.The results show that,due to the different performance requirements,PA10T is studied from the co-polymerization,blending modification and filling modification of these three aspects.Meanwhile,the existing problems are analyzed and the development prospect of PA10T is predicted.展开更多
There is low formation pressure coefficient and high formation temperature in ludong-wucaiwan area. Gas cut and gas channeling happen seriously during oil and gas well cementing. The existing anti-migration additive h...There is low formation pressure coefficient and high formation temperature in ludong-wucaiwan area. Gas cut and gas channeling happen seriously during oil and gas well cementing. The existing anti-migration additive has only effects on single trait, so it is difficult to meet cementing requirement. According to this situation we could use latex slurry to anti-gas channeling. We have synthesised a set of anti-gas channeling lightweight temperature-resistant latex slurry and formed a new channeling preventing latex slurry through plenty of previous laboratory experiments. Finally the performance of latex slurry on temperature-resistant, anti-gas channeling and the anti-gas channeling of cement paste are studied. The experimental results show that this latex system has strong temperature-resistant and anti-gas channeling, which completely meet the requirement of cementing in this area.展开更多
The compressive strength and ilexural toughness as well as fracture energy of fiber reinforced highperformance concrete （FRHPC） subjected to different high temperatures were studied. The results showed that after ex...The compressive strength and ilexural toughness as well as fracture energy of fiber reinforced highperformance concrete （FRHPC） subjected to different high temperatures were studied. The results showed that after exposure at 300,600 and 900℃, the concrete mixes retained 88.1% , 41.3% and 10.2% of the original compressive strength on average, respectively. Steel fiber and polypropylene （PP） fiber were both effective in minimizing the damage effect of high temperatures on the compressive strength. The HPC reinforced with steel fibers showed higher flexural toughness and fracture energy before and after the high-temperature exposures. In comparison, PP fibers had minor beneficial effects on the flexural toughness and fracture energy. The mechanical properties of HPC reinforced with hybrid fibers （steel fiber ＋ PP fiber） were equivalent to or better than those of HPC reinforced with steel fibers alone. In addition, the failure pattern of FRHPC beams changed from pull-out of steel fibers at lower temperatures （20, 300 and 600℃） to tensile failure of steel fibers at higher temperature （900 ℃）.展开更多
This paper describes the effects of fire on durability of reinforced concrete structures, and points out that fire not only damages the chemical composition and physical structure of concrete by high temperature, but ...This paper describes the effects of fire on durability of reinforced concrete structures, and points out that fire not only damages the chemical composition and physical structure of concrete by high temperature, but also leads to an additional risk due to the generation of polyvinyl chloride (PVC) combustion gases. A mathematical model is proposed to calculate chloride ingress profiles in fire damaged concrete, so as to explore the service life prediction of the structure. Rapid Chloride Migration (RCM) test was carried out to determine the chloride diffusion coefficients for the application of the mathematical model. Finally, the detected results of a reported case testified to the validity of the mathematical model.展开更多
基金Supported by the Fund from Agricultural Science and Technology Innovation Center of Hubei Province(2007-620-001-003)Key Project of Natural Science Foundation of Hubei Province(2014CFA103)~~
文摘The tolerance of a restorer line R1056 of rice and its hybrid combinations to high temperature at flowering stage was evaluated by sowing them at three dif- ferent dates and transplanting them into a greenhouse equipped with heating system at flowering stage. Several important agronomic traits of these rice varieties or combinations were also measured. The results revealed that treated by high temper- ature （38 ℃） at flowering stage, the seed setting rate （70.4%）, percentage of dehis- cent anthers （75.5%）, and pollen number per floret （78） of R1056 were close to those of N22, which is tolerant to high temperature, and significantly higher than those of the rice varieties sensitive to high temperature. The seed setting rate, per- centage of dehiscent anthers, and pollen number per floret of the hybrid combina- tions generated from R1056 were smaller than those of R1056, but higher than those of the rice varieties sensitive to high temperature. R1056 had excellent agro- nomic traits, and good combining ability, and its hybrid combinations had low plant height, numerous panicles and high yield, suggesting that R1056 is not only an ex- cellent rice variety with tolerance to high temperature, but also an excellent restorer in three-line hybrid rice breeding.
基金Supported by National Natural Science Foundation of China(30771156,31200387)~~
文摘Two heat-tolerant rice varieties, N5 and TQ, were chosen as test materi- als. Specifically, rice seedlings （leaf age at 2.1）, cultivated in room, were treated at 40 ℃ for 7 d and some indices were measured, including plant height, dry weight, leaf color, proline, malondialdehyde and conductivity. The results showed that high temperature advanced the growth of N5 seedlings, for example, plant height, root length and dry weight of ground parts all increased. However, high temperature prevented TQ seedlings growth, plant height in particular. Furthermore, high temper- ature treatment increased the content of chlorophyll of N5 and had none effects on PSII of N5, with little damages on membrane system. On the other hand, high temperature actually reduced PSII activity of TQ, and seriously damaged TQ mem- brane system. It is speculated that the differences of the two varieties lie on pro- duction or removing capacity of reactive oxide species.
基金Supported by Special Fund for Cassava Technology System Fund (CARS-12-hncq)the Central-level Public Welfare Research Institutes for Basic R & D Operations (No.2011h-zs1J014,No.2009hzs1J013)+1 种基金Agricultural Public Welfare Industry-specific (200903034-5)Science and Technology Program Project of Hainan Province (ZDXM20100022,ZDXM20110032)~~
文摘[Objective] Mononychellus tanajoa is a mite speices recently invaded into China in 2008. Temperature is one of the most important ecological factors affecting the growth and reproduction of M. tanajoa. The objective of the current study was to reveal the effects of high temperature incubation on the activities of some protective enzymes in M. tanajoa at different growth stages. The results would contribute to the understanding of the adaptable distribution of M. tanajoa after its invasion into China, the mechanisms in its invasion, diffusion and ecological adaptation, and the monitor- ing, early warning and effective prevention of its damage. [Method] Six protective enzymes, Le. polyphenol oxidase （PPO）, peroxidase （POD）, ascorbate oxidase （AsA- POD）, catalase （CAT）, superoxide dismutase （SOD） and esterase （EST）, were cho- sen to study their activities after the mites at different growth stages were incubated at a extremely high temperature of 42 ~C for a certain period of time up to 24 h. The activities were measured by spectrophotometric endpoint assay method. [Results] Enzyme activities in M. tanajoa were affected by the high temperature incubation. However, differences in enzyme activity changes were found among different protec- tive enzymes and among different growth stages of M. tanajoa. Activities of PPO, POD, AsA-POD and CAT were significantly increased in the larval mites and female adult mites of M. tanajoa. CAT activity was significantly decreased in protonymph and deutonymph of M. tanajoa. Activities of PPO, POD and AsA-POD in protonymph and deutonymph showed no obvious difference from the control. [Conclusion] The activity changes of some protective enzymes in M. tanajoa following high-temperature treatment are part of its anti-stress reaction mechanism. In mite protonymph and deutonymph, activities of PPO, POD and AsA-POD are similar to the untreated con- trol which may be associated with the thermostability of M. tanajoa. It is concluded that, the long-time stress of extreme temperature may result in the increase of the thermostability of mite individuals, the enhancement of the population thermal stability and subsequently lead to rapid expansion of the population.
基金Project(CKJA201202)supported by the Innovation Fund Key Project of Nanjing Institute of Technology,ChinaProject(51301088)supported by the National Natural Science Foundation of China
文摘In order to improve corrosion resistance of stainless steel 316L in warm acidic solution, Ni？Cu？P coatings with high copper and phosphorus contents were deposited onto stainless steel 316L substrates via electroless plating. The structure of the film and its resistance to corrosion in a warm acidic environment were investigated using scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS）, X-ray diffraction spectrometry （XRD）, polarization curves, electrochemical impedance spectroscopy （EIS）, and dipping corrosion tests, respectively. The results demonstrate that Ni？Cu？P coatings consist of two types of nodules, which are 19.98% Cu and 39.17% Cu （mass fraction） respectively. The corrosion resistance of the 316L substrate when subjected to a warm acidic solution is significantly improved by the addition of the new type of the Ni？Cu？P coating. The as-plated coatings demonstrate better corrosion resistance than annealed coatings. As-plated coatings and those annealed at 673 K are found to corrode selectively, while pitting is observed to be the main corrosion mechanism of coatings annealed at 773 and 873 K.
基金financial support from CAS Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese Academy of Sciences。
文摘The evolution of morphology, composition, thickness and corrosion resistance of the oxide film on pure Sn solder substrate submitted to high-temperature aging in 150 °C dry atmosphere was investigated. The results indicate that high-temperature aging accelerates the dehydration of Sn(OH)_(4)in the pre-existing native oxide film to form SnO_(2)and facilitates the oxidation of fresh Sn substrate, resulting in the gradual increase in oxide film thickness and surface roughness with prolonging aging time. However, the corrosion resistance of the film initially is enhanced and then deteriorated with an extending aging time. Besides, the formation and evolution mechanisms of the oxide film with aging time were discussed.
文摘Researches about synthesis and modification of nylon 10T(PA10T)in domestic universities and scientific research institutions are reviewed in this paper.The results show that,due to the different performance requirements,PA10T is studied from the co-polymerization,blending modification and filling modification of these three aspects.Meanwhile,the existing problems are analyzed and the development prospect of PA10T is predicted.
文摘There is low formation pressure coefficient and high formation temperature in ludong-wucaiwan area. Gas cut and gas channeling happen seriously during oil and gas well cementing. The existing anti-migration additive has only effects on single trait, so it is difficult to meet cementing requirement. According to this situation we could use latex slurry to anti-gas channeling. We have synthesised a set of anti-gas channeling lightweight temperature-resistant latex slurry and formed a new channeling preventing latex slurry through plenty of previous laboratory experiments. Finally the performance of latex slurry on temperature-resistant, anti-gas channeling and the anti-gas channeling of cement paste are studied. The experimental results show that this latex system has strong temperature-resistant and anti-gas channeling, which completely meet the requirement of cementing in this area.
基金Sponsored by the National Natural Science Foundation of China (Grant No.50278013)
文摘The compressive strength and ilexural toughness as well as fracture energy of fiber reinforced highperformance concrete （FRHPC） subjected to different high temperatures were studied. The results showed that after exposure at 300,600 and 900℃, the concrete mixes retained 88.1% , 41.3% and 10.2% of the original compressive strength on average, respectively. Steel fiber and polypropylene （PP） fiber were both effective in minimizing the damage effect of high temperatures on the compressive strength. The HPC reinforced with steel fibers showed higher flexural toughness and fracture energy before and after the high-temperature exposures. In comparison, PP fibers had minor beneficial effects on the flexural toughness and fracture energy. The mechanical properties of HPC reinforced with hybrid fibers （steel fiber ＋ PP fiber） were equivalent to or better than those of HPC reinforced with steel fibers alone. In addition, the failure pattern of FRHPC beams changed from pull-out of steel fibers at lower temperatures （20, 300 and 600℃） to tensile failure of steel fibers at higher temperature （900 ℃）.
基金Project (No. 50538070) supported by the National Natural ScienceFoundation of China
文摘This paper describes the effects of fire on durability of reinforced concrete structures, and points out that fire not only damages the chemical composition and physical structure of concrete by high temperature, but also leads to an additional risk due to the generation of polyvinyl chloride (PVC) combustion gases. A mathematical model is proposed to calculate chloride ingress profiles in fire damaged concrete, so as to explore the service life prediction of the structure. Rapid Chloride Migration (RCM) test was carried out to determine the chloride diffusion coefficients for the application of the mathematical model. Finally, the detected results of a reported case testified to the validity of the mathematical model.
