高熵合金结构安全性能智能检测系统应用研究

高熵合金材料因其强度高、硬度高、耐腐蚀性好等特点成为了国民经济建设中非常重要的结构材料,但缺点高熵合金是脆性材料,容易发生事故、安全性差。一旦发生事故,会对国民经济和人身安全带来巨大的损失。因此,对于高熵合金的安全性能检测引起了人们越来越多的关注。通过硬件和软件两方面的研究设计一种高熵合金结构安全性能智能检测系统,再与传统检测方式进行比较,得出新型检测系统对于高熵合金材料安全性能的检测精度更高的结论。

A novel immiscible high entropy alloy strengthened via L1_(2)-nanoprecipitate

The low-cost Fe-Cu,Fe-Ni,and Cu-based high-entropy alloys exhibit a widespread utilization prospect.However,these potential applications have been limited by their low strength.In this study,a novel Fe_(31)Cu_(31)Ni_(28)Al_(4)Ti_(3)Co_(3) immiscible high-entropy alloy(HEA)was developed.After vacuum arc melting and copper mold suction casting,this HEA exhibits a unique phase separation microstructure,which consists of striped Cu-rich regions and Fe-rich region.Further magnification of the striped Cu-rich region reveals that it is composed of a Cu-rich dot-like phase and a Fe-rich region.The aging alloy is further strengthened by a L1_(2)-Ni_(3)(AlTi)nanoprecipitates,achieving excellent yield strength(1185 MPa)and uniform ductility(~8.8%).The differential distribution of the L1_(2) nanoprecipitate in the striped Cu-rich region and the external Fe-rich region increased the strength difference between these two regions,which increased the strain gradient and thus improved hetero-deformation induced(HDI)hardening.This work provides a new route to improve the HDI hardening of Fe-Cu alloys.

Structure and properties of FeCoNiCrCu_(0.5)Al_x high-entropy alloy

Effects of Al content and heat treatment on the structure,hardness and electrochemical properties of FeCoNiCrCu0.5Alx high-entropy alloys were investigated.The phase structure of as-cast alloys evolves from FCC phase to BCC phase with the increase of Al content.The stable phase of FeCoNiCrCu0.5Alx high-entropy alloys will transform from FCC phase to FCC＋BCC duplex phases when x value increases from 0.5 to 1.5.The hardness of BCC phase is higher than that of FCC phase,and the corrosion resistance of BCC phase is better than FCC phase in chlorine ion and acid medium.High hardness and good corrosion resistance can be obtained in as-cast FeCoNiCrCu0.5Al1.0 alloy.

Microstructures,tensile properties and serrated flow of Al_xCrMnFeCoNi high entropy alloys

Microstructures and mechanical properties of dual-phase AlxCrMnFeCoNi (x=0.4, 0.5, 0.6, at.%) alloys were investigated. Thermomechanical processing leads to a microstructural evolution from cast dendritic structures to equiaxed ones, consisting of face-centered cubic (fcc) and body-centered cubic (bcc) phases in the two states. The volume fraction of bcc phase increases and the size of fcc grain decreases with increasing Al content, resulting in remarkably improved tensile strength. Specifically, the serrated flow occurring at the medium temperatures varies from type A+B to B+C or C as the testing temperature increases. The average serration amplitude of these Al-containing alloys is larger than that of CoCrFeNiMn alloy due to the enhanced pinning effect. The early small strain produces low-density of dislocation arrays and bowed dislocations in fcc grains while the dislocation climb and shearing mechanism dominate inside bcc grains. The cross-slip and kinks of dislocations are frequently observed and high-density-tangled dislocations lead to dislocation cells after plastic deformation with a high strain.

Mechanical properties and fracture mechanism of as-cast MnFeCoCuNix high-entropy alloys

MnFeCoCuNix high-entropy alloys(HEAs)with different Ni contents were fabricated by vacuum induction melting.XRD and SEM−EDS were used to analyze the phase constitution and structure,and the tensile properties of the samples were determined using a universal tensile tester.The results show that the HEAs consist of a dual-phase structure,in which FCC1 phase is rich in Fe and Co,while the FCC2 phase has high contents of Cu and Mn.As Ni content increases,the segregation of Cu decreases,accompanied by the decrease of FCC2 phase.Moreover,the tensile strength of the HEAs increases first and then decreases,and the elongation increases slightly.This is attributed to the combined effect of interface strengthening and solid solution strengthening.The in-situ stretched MnFeCoCuNi0.5 alloy shows obvious neck shrinkage during the tensile fracture process.In the initial deformation stage,the slip lines show different morphologies in the dual-phase structure.However,in the later stage,the surface slip lines become longer and denser due to the redistribution of atoms and the re-separation of the dissolved phase.

Evaluation of microstructure and texture formation during annealing of cold-rolled FeCrCuMnNi multiphase high-entropy alloy

Microstructure and texture variations of a cold-rolled multiphase FeCrCuMnNi high-entropy alloy were studied after different annealing treatments.Samples were heat-treated at different temperatures and for different time,and then,subjected to different tests including XRD and SEM-EBSD.The results reveal that the FCC1 phase,which goes through more strain,has lower melting temperature,and recrystallizes earlier(lower temperature and shorter time).In addition,it is seen that particle stimulated nucleation is more effective on the recrystallization of this phase compared to FCC2 phase.A significant number of FCC1 nuclei form around the BCC particles.Nucleation of FCC2 phase initiated at 800℃mostly at the grain boundaries and the inhomogeneities.The FCC1 phase was almost fully recrystallized at this temperature.The annealing process led to the elimination of rolling textures,while the Brass component remained a major component in the recrystallized samples.Increasing annealing temperature as well as annealing time led to the formation of Cube texture component,which is a major component of recrystallized low stacking fault energy materials.Furthermore,D and Rt-Co components formed during recrystallization as a result of the formation of annealing twins.

Modifying element diffusion pathway by transition layer structure in high-entropy alloy particle reinforced Cu matrix composites

The Al0.3CoCrFeNi high-entropy alloy(HEA)particles reinforced Cu matrix composites(CMCs)were fabricated by mechanical alloying and sintering.Transition layer structure was obtained by multi-step ball milling to investigate the related influence on element diffusion behavior and wear properties of CMCs.The results indicate that a new Cu transition layer is generated,and the thickness is about 5μm.Cr element diffuses into the interface via the transition layer,which forms the complex oxide.Because of the structure of Cu transition layer,the diffusion rates of Ni,Co and Fe increase,especially the Ni element.The wear resistance of CMCs is improved by 30%,which is due to the improvement of interface bonding strength,compared with the CMCs without transition layer.This method is applicable to the development of advanced HEA reinforced metallic matrix composites.

Interstitially carbon-alloyed refractory high-entropy alloys with a body-centered cubic structure

The introduction of carbon interstitials into high-entropy alloys(HEAs)provides an effective way to improve their properties.However,all such HEA systems explored so far are limited to those with the face-centered-cubic(fcc)structure.Here we report the structural,mechanical and physical properties of the refractory(Nb_(0.375)Ta_(0.25)Mo_(0.125)W_(0.125)Re_(0.125))_(100−x)C_(x) HEAs over a wide x range of 0≤x≤20.It is found that,whereas the starting HEA(x=0)is composed of a major body-centered-cubic(bcc)phase with significant impurities,the bcc phase fraction increases with the C concentration and achieves almost 100%at x=20.Moreover,the increase of C content x results in an expansion of the bcc lattice,an enhancement of the microhardness,an increase in residual resistivity and a small variation of density of states at the Fermi level.All these features are consistent with the expectation that carbon atoms occupy the interstitial site.For x≥11.1,the X-ray photoelectron spectroscopy indicates the bond formation between the carbon and metal atoms,suggesting that some carbon atoms may also reside in the lattice site.In addition,a semiquantitative analysis shows that the enhanced mixing entropy caused by carbon addition plays a key role in stabilizing the(nearly)single solid-solution phase.Our study not only provides the first series of carbon interstitial HEAs with a bcc structure,but also helps to better understand the alloying behavior of carbon in refractory HEAs.

Near-equiatomic high-entropy decagonal quasicrystal in Al20Si20Mn20Fe20Ga20

High-entropy alloys(HEAs)contain multiple principal alloying elements,but usually with simple crystal structures.Quasicrystals are structurally complex phases,but are generally dominated by only one element.However,nearequiatomic high-entropy quasicrystals have rarely been reported because they are difficult to prepare experimentally and predict theoretically.Therefore,the preparation and crystal structures of near-equiatomic high-entropy quasicrystals have drawn much interest.We report a quinary decagonal quasicrystal(DQC)with near-equiatomic alloying elements in Al20Si20Mn20Fe20Ga20 melt-spun ribbons,which is the first to our knowledge.Meanwhile,the structural features of the DQC are characterized in detail.The configurational entropy of both the alloy and DQC satisfies the entropy-based criterion for HEAs,suggesting a high-entropy DQC.Our findings provide a new strategy to develop high-entropy quasicrystals.