高硅烷含量硅丙复合乳液的性能及应用研究

将γ -甲基丙烯酰氧基丙基三甲氧基硅烷中水解速度较快的甲氧基置换成水解速度较慢的乙氧基或异丙氧基 ,通过乳液共聚 ,合成了新型高硅烷含量的硅丙复合乳液。用核磁共振 (NMR)对新型硅烷单体进行了结构表征 ,并采用傅里叶红外光谱 (FTIR)证实了共聚物结构。聚合物膜的应力 -应变及耐水性测试结果表明 :该聚合物具有优良的力学性能和较强的耐水性。用此硅丙乳液配制了一种高性能外墙乳胶漆 ,其各项性能指标均达到或超过了GB/T975 5— 1995国家一级品的标准。

高性能高硅烷含量硅丙复合乳液的研究

利用醇解反应 ,将γ-甲基丙烯酰氧基丙基三甲氧基硅烷中水解速度较快的甲氧基置换成水解速度较慢的乙氧基或异丙氧基 ,通过乳液共聚合成了高硅烷含量的硅丙复合乳液。用 NMR,GC对硅烷单体进行了结构分析及转化率测试 ,并利用红外光谱对共聚物进行了表征。研究了高有机硅含量对共聚物膜力学性能及吸水率的影响 ,证实了高含量硅烷组分能显著地提高丙烯酸酯乳液的物理性能。

Exploring suitable ZSM-5/MCM-41 zeolites for catalytic cracking of n-dodecane: Effect of initial particle size and Si/Al ratio

In this study,various ZSM-5/MCM-41 micro/mesoporous zeolite composites have been prepared by alkalidesilication and surfactant-directed recrystallization of ZSM-5.The effects of particle size and Si/Al ratio of initial ZSM-5 zeolites on the structure and catalytic performance of ZSM-5/MCM-41 composites are studied.The results of XRD,TEM N_2-adsorption-desorption,NH_3-TPD and in situ FT-IR revealed that ordered hexagonal MCM-41 mesopores with 3-4 nm pore size were formed around ZSM-5 crystals,and the specific surface area and mesopore volume of composites increased with increasing the Si/Al ratio of initial ZSM-5.Catalytic cracking of n-dodecane(550℃,4 MPa) showed that the ZSM-5/MCM-41 composites obtained from the high Si/Al ratio and nano-sized initial ZSM-5 zeolites exhibited superior catalytic performance,with the improvement higher than 87%in the catalytic activities and 21%in the deactivation rate compared with untreated zeolites.This could be ascribed to their suitable pore structure,which enhanced the diffusion of reactant molecules in pores of catalysts.

Effects of nano-SiO_2 on reinforcing and toughening polypropylene

SiO2 nano particle, through surface modification by silicane coupling agent KH-570, was successfully applied to make nano SiO2/PP composite material by the melt-out blending process with twin-screw extruder. Effects of nano SiO2on the reinforcing and toughening of PP were studied by analyzing the material impact broken fracture, the crystal structure and the diameter of SiO2nano particle using SEM, XRD and TEM, respectively. Results showed that the impact strength and the tensile strength of nano SiO2/PP composite material were improved apparently; the impact strength of PP was fracture was increased to 67% when the nano SiO2 content was 4%; while the nano SiO2 particle upon surface treatment will impose obvious heterogeneous nucleation function over PP crystal.

Structure Characterization of Fluorosilicone Oils

Fluorosilicone oil is polysiloxane with alkyl side chains containing fluorine, and because of its excellent thermal oxidation stability, cold flow property and cryogenic property, it can be widely used as a high temperature lubricant in the field of military aerospace industry. Two kinds of fluorosilicone oils, FSiO-a and FSiO-b, were synthesized by different pro- cessing means. FTICR MS was used to collect the information on composition and structure of the two polymers, respec- tively. The test results show that the two fluorosilicone oils have different contents of fluorine-containing chain segments (m/ n value), the maximum distribution of m/n value of FSiO-a oil ranges from 0.22 to 0.25, and that of FSiO-b oil ranges from 0.4 to 0.67. Difference in synthesis techniques makes this discrepancy and affects the quality and thermal stability of the fluoro- silicone oils.

Highly Efficient Asymmetric Transcyanation of Acetyltrimethylsilane with Acetone Cyanohydrin Catalyzed by (R)-Oxynitrilase from Prunus Japonica Seed Meal

Highly efficient asymmetric transcyanation of acetyltrimethylsilane with acetone cyanohydrin in an aqueous/organic biphasic system catalyzed with （R）-oxynitrilase from defatted Prunus Japonica seed meal for the preparation of optically active （R）-2-trimethylsilyl-2-hydroxyl-propionitrile was successfully carried out for the first time. For better understanding of the reaction, various influential variables were examined with respect to the initial reaction rate, the substrate conversion and the product enantiomeric excess （e.e.）. Diisopropyl ether was found to be the best organic phase for this reaction among all the organic solvents tested. The optimal concentrations of Prunus Japonica seed meal powder, acetyltrimethylsilane and acetone cyanohydrin, volume ratio of aqueous phase to organic phase, buffer pH value and the reaction temperature were 34.5g·L^-1 and 14mmol· L^-1, 28mmol· L^-1, 13% （by volume）, 5.0 and 30℃, respectively, while the initial reaction rate, the substrate conversion and the product enantiomeric excess were 1.34 mmol·L^-1·h^-1, 99.0% and 99.0%, respectively. The comparative study demonstrated that silicon atom in substrate showed great effect on the reaction and acetyltrimethylsilane was a much better substrate for （R）-hydroxynitrile lyase from Prunus Japonica seed than its carbon analogue 3,3-dimethyl-2-butanone.

Stress-deconcentrated ultrasensitive strain sensor with hydrogen-bonding-tuned fracture resilience for robust biomechanical monitoring

Recently,rapid advances in flexible strain sensors have broadened their application scenario in monitoring of various mechanophysiological signals.Among various strain sensors,the crack-based strain sensors have drawn increasing attention in monitoring subtle mechanical deformation due to their high sensitivity.However,early generation and rapid propagation of cracks in the conductive sensing layer result in a narrow working range,limiting their application in monitoring large biomechanical signals.Herein,we developed a stress-deconcentrated ultrasensitive strain(SDUS)sensor with ultrahigh sensitivity(gauge factor up to2.3×10^(6))and a wide working range(0%-50%)via incorporating notch-insensitive elastic substrate and microcrack-tunable conductive layer.Furthermore,the highly elastic amine-based polymer-modified polydimethylsiloxane substrate without obvious hysteresis endows our SDUS sensor with a rapid response time(2.33 ms)to external stimuli.The accurate detection of the radial pulse,joint motion,and vocal cord vibration proves the capability of SDUS sensor for healthcare monitoring and human-machine communications.