高频高磁密时叠置硅钢片的铁芯损耗计算式改进

已有的铁芯损耗计算式并未考虑高频高磁密时频率和磁密对损耗系数的影响。为解决该问题,提出了一种改进的铁芯损耗计算式。基于几种典型硅钢片的出厂原始数据,以及通过构建的新型3维磁特性测试系统实验所得的宽频铁耗数据,采用改进计算式研究了涡流集肤效应和动态磁滞回线对损耗系数的影响。在此基础上绘制出新的铁芯损耗曲线,并与实测数据进行了比较。结果表明:采用该计算式所得铁耗与实测数据具有很好的一致性,该方法能显著提高计算精度,使最大误差由35%降低到10%以下;同时验证了在高频高磁密时,损耗系数应当随着频率和磁密的变化而变化。

一种电机用非晶合金铁心的制备及其磁性能研究

将叠层非晶薄带整体切割后机械固定成形,再采用热处理的方法,将非晶合金带材制作成电机定子铁心,并与相同尺寸的层间粘接法制作的非晶合金铁心以及硅钢铁心进行磁性能对比。结果显示,机械固定法制备的非晶合金铁心具有较低的铁心损耗和较高的磁导率,并且励磁磁场强度在0～2 000 A/m范围内具有较高的磁通密度。

110kV电磁式PT铁磁谐振过电压分析和对策

本文对贵溪冶炼厂总降压 110KV系统开关断口电容与电磁式电压互感器出现操作铁磁谐振过电压分析 ,提出解决操作产生谐振的对策。

Design and implementation of low-cost geomagnetic field monitoring equipment for high-density deployment

The observation of geomagnetic field variations is an important approach to studying earthquake precursors.Since 1987,the China Earthquake Administration has explored this seismomagnetic relationship.In particular,they studied local magnetic field anomalies over the Chinese mainland for earthquake prediction.Owing to the years of research on the seismomagnetic relationship,earthquake prediction experts have concluded that the compressive magnetic effect,tectonic magnetic effect,electric magnetic fluid effect,and other factors contribute to preearthquake magnetic anomalies.However,this involves a small magnitude of magnetic field changes.It is difficult to relate them to the abnormal changes of the extremely large magnetic field in regions with extreme earthquakes owing to the high cost of professional geomagnetic equipment,thereby limiting large-scale deployment.Moreover,it is difficult to obtain strong magnetic field changes before an earthquake.The Tianjin Earthquake Agency has developed low-cost geomagnetic field observation equipment through the Beijing–Tianjin–Hebei geomagnetic equipment test project.The new system was used to test the availability of equipment and determine the findings based on big data..

Fabricating a Micro Electromagnetic Actuator with High Energy Density

This paper introduces a new technology to fabricate a micro electromagnetic actuator with high energy density without an enclosed magnetic circuit. This technology includes fabricating multi-turns planar micro coils and fabricating the thick magnetic （NiFe） core on the silicon wafer. The multi-turns planar micro coils are fabricated by the electroplating method from the surface along the line and by dynamically controlling the current density of the copper electrolytes. In order to fabricate thick NiFe plating,the adhesion properties between the NiFe plating and the silicon substrates are improved by changing the surface roughness of the silicon substrates and increasing the thickness of the seed layer. Furthermore,the micro electromagnetic actuator is tested and the energy density of the actuator is evaluated by force testing. The experiments show that the microactuator is efficient in producing high magnetic energy density and high magnetic force.

Application of transient electromagnetic method in tunnel exploration

Along with the economic development,large tunnels need to be constructed in many high mountains or complex structure regions,and the design and construction of detailed tunnel exploration become particularly important.Transient electromagnetic method( TEM) uses a non-grounded loop or an electrode to send a primary electromagnetic pulse into the ground,and observes spatial and temporal distribution of secondary electromagnetic field,which is widely applied in mineral resource exploration,engineering geology,etc.The application of TEM in the tunnel construction of Kaiyuan Temple is researched in this study.The smoke loop inversion is adopted for inverting the transient electromagnetic data.The drilling data and high density resistivity method data are combined for comparison.The obtained inversion result greatly coincides with the actual conditions.Therefore,the geophysical prospecting basis can be provided for the division of stratum,delineation of geological structure,and design and construction of tunnel pavement.By virtue of TEM,drilling data and high density resistivity method,the tunnel construction of Kaiyuan Temple has obtained satisfactory results.

High densities of magnetic nanoparticles supported on graphene fabricated by atomic layer deposition and their use as efficient synergistic microwave absorbers

An atomic layer deposition （ALD） method has been employed to synthesize Fe3O4/graphene and Ni/graphene composites. The structure and microwave absorbing properties of the as-prepared composites are investigated. The surfaces of graphene are densely covered by Fe3O4 or Ni nanoparticles with a narrow size distribution, and the magnetic nanoparticles are well distributed on each graphene sheet without significant conglomeration or large vacancies. The coated graphene materials exhibit remarkably improved electromagnetic （EM） absorption properties compared to the pristine graphene. The optimal reflection loss （RL） reaches -46.4 dB at 15.6 GHz with a thickness of only 1.4 mm for the Fe3O4/graphene composites obtained by applying 100 cycles of Fe2O3 deposition followed by a hydrogen reduction. The enhanced absorption ability arises from the effective impedance matching, multiple interfacial polarization and increased magnetic loss from the added magnetic constituents. Moreover, compared with other recently reported materials, the composites have a lower filling ratio and smaller coating thickness resulting in significantly increased EM absorption properties. This demonstrates that nanoscale surface modification of magnetic particles on graphene by ALD is a very promising way to design lightweight and high-efficiency microwave absorbers.

The Effect of Magnetic Field on an Asymmetrical Gaussian Potential Quantum Well Qubit

Under the influence of an applied magnetic field(MF), the eigenenergies and the eigenfunctions of the ground and the first excited states(GFES) are obtained by using a variational method of the Pekar type(VMPT) in a strong electron-LO-phonon coupling asymmetrical Gaussian potential quantum well(AGPQW). This AGPQW system may be employed as a two-level qubit. The numerical results have indicated(i) that when the electron situates in the superposition state of the GFES, we obtain the time evolution and the coordinate change of the electron probability density in the AGPQW,(ii) that due to the presence of the asymmetrical potential in the growth direction of the AGPQW, the probability density shows double-peak configuration, whereas there is only one peak if the confinement is a two dimensional symmetric one in the xy plane of the AGPQW,(iii) that the oscillatory period is a decreasing function of the cyclotron frequency of the MF, the height of the AGPQW and the polaron radius,(iv) and that as the range of the confinement potential(RCP) decreases the oscillatory period will decrease firstly and then increase and it will take a minimum when R =-0.234 nm.

Giant magnetostrictive materials

Giant magnetostrictive materials are a kind of functional materials developed since 1970s, known as their large magnetostrain and high energy density. In this paper, an introduction of magnetostriction and the history of magnetostrictive materials are described firstly. Then we review the recent developments of both rare earth and non-rare earth magnetostrictive materials. Finally, the tendency of developing new giant magnetostrictive materials is presented.

Revealing interfacial space charge storage of Li^(+)/Na^(+)/K^(+)by operando magnetometry

Interfacial space charge storage between ionic and electronic conductor is a promising scheme to further improve energy and power density of alkali metal ion batteries(AMIBs).However,the general behavior of space charge storage in AMIBs has been less investigated experimentally,mostly due to the complicated electrochemical behavior and lack of proper characterization techniques.Here,we use operando magnetometry to verify that in FeSe_(2)AMIBs,abundant Li^(+)/Na^(+)/K^(+)(M^(+))can be stored at M_(2)Se phase while electrons accumulate at Fe nanoparticles,forming interfacial space charge layers.Magnetic and dynamics tests further demonstrate that with increasing ionic radius from Li^(+),Na^(+)to K^(+),the reaction kinetics can be hindered,resulting in limited Fe formation and reduced space charge storage capacity.This work lays solid foundation for studying the complex interfacial effect in electrochemical processes and designing advanced energy storage devices with substantial capacity and considerable power density.