基于OpenCV的双波长光纤导引光在高精度装调上的应用

为了保证双波长光纤导引光在高精度装调设备中的成功应用,设计了一种基于OpenCV(Open Source Computer Vision Library)的图像处理算法。采用主动调整曝光模式对CCD(Charge-coupled Device)相机进行主动调焦,利用OpenCV分析典型图像处理算法,调整算法参数,通过最小二乘法拟合图像,绘制中心坐标,最终实现输出理想的图像。经检测分析,图像校准的精度平均值为4.54μrad。该算法能够捕捉、识别并实时跟踪目标,将计算机识别的中心坐标打印到输出的图像上,提高了双波长光纤导引光对装调设备的装调精度。

星载激光测距仪扩束系统的高精度装调

星载激光测距仪扩束系统为无焦系统,对光学装调有着苛刻的要求,装调精度是决定激光测距仪工作能力的关键因素。利用计算机辅助装调技术,确定光学系统对光学元件的敏感度和补偿调整参量。针对镜间距影响该系统性能参数的特点,提出采用高精度三坐标测量技术和双光路定心技术对扩束系统装调。最后,采用1 064 nm干涉仪对光学系统像质进行测试,使用套孔法对束散角进行测量。测试结果表明:该星载激光测距仪扩束系统RMS优于0.225λ,束散角为0.41 mrad,满足设计要求。

库德光路的五棱镜安装方法

为实现库德光路的快速高精度装调,提供了一种基于自准直原理的五棱镜安装方法,给出了库德光路的原理和安装方法,并对组装后的库德光路进行误差分析。得出应用此方法安装库德光路的光学静态误差在15″以内,满足一般库德光路的技术要求。因此,此方法不仅可以适用于库德光路,对反射镜的安装也有一定的借鉴和参考。

High-precision grating sensor demodulation device's network interface based on DM9000A

High-precision fiber Bragg grating se nsor demodulation instrument with wide-range dynamic scanning can effectivel y improve the measuring range of the optical fiber grating sensor.Ethernet com munication module is an extremely important part of the high-precision grating sensor demodulation device.Network interface based on Ethernet control chip D M9000A is used to send and receive the Bragg grating sensing pulse.The network transformer YL18-2050S is used to convert and filter the pulse from network.The transmitting and receiving program of grating demodulation,hardware circuit of Ethernet transmission interface are designed.The experimental results show that the network interface can achieve accurate and real-time transmissi on of the grating sensing information at high speed.