For the requirement of safe and stable operation,the combined sealing structure was used for reciprocating motion in the deep sea high-pressure environment,and the effects of different seawater depths and shaft moveme...For the requirement of safe and stable operation,the combined sealing structure was used for reciprocating motion in the deep sea high-pressure environment,and the effects of different seawater depths and shaft movement speed on the sealing performance of the combined sealing structure were studied.The change rule of the sealing performance of the combined sealing structure of reciprocating motion under different working conditions is proved.The study shows that in the combined sealing structure of reciprocating movement,the Von Mises stress and the contact stress of the O-ring varies with the direction of the shaft movement.The Von Mises stress and contact stress of the O-ring,the Von Mises stress and the contact stress on each sealing lip of the slip ring gradually increase with the increasing of seawater depths.At the same time,the Von Mises stress of the O-ring which in the process of the shaft upward movement is greater than the shaft downward movement,making the shaft upward movement more likely to cause the O-ring relaxation and fatigue.The shaft movement speed has no significant influence on the Von Mises stress and contact stress of the O-ring.The research results provide theoretical guidance and technical support for the selection and optimization of the geometrical parameters of the combined sealing structure in the deep-sea high-pressure environment.展开更多
The starches were isolated by alkaline extraction from white and red sorghum, predominant cultivars in the Sahara of Algeria. Morphological, thermal properties and amylose content of isolated starches were examined. T...The starches were isolated by alkaline extraction from white and red sorghum, predominant cultivars in the Sahara of Algeria. Morphological, thermal properties and amylose content of isolated starches were examined. The starches of two sorghum landraces of white and pigmented kernels growing in hyper arid environmental conditions showed significant differences in granule size, amylose content and thermal behavior which ultimately affect the physicochemical and functional properties. When observed using environmental scanning electron microscopy （ESEM）. The starch granules showed polyhedral shape. Some of them showed pinholes. The granular size ranged between 6.325-39.905 μm and 7.096-44.774 μm, respectively for white and red sorghum starches. The granule size distribution was unimodal. The amylose content in white sorghum starch （27.1%） was higher than that in red sorghum （24.8%）. Differential scanning calorimetry （DSC） analysis revealed that sorghum starches present higher temperatures at the peak （70.60℃ and 72.28℃ for white and red sorghum starches, respectively） and lower gelatinization enthalpies （9.087 J/g and 8.270 J/g for white and red sorghum starches, respectively） than other cereal starches. The determination of these properties is relevant to the comprehension of starch and starch-based foods digestibility in order to direct them towards the specific applications in food and nonfood sectors.展开更多
HVFA （high-volume fly ash） concrete could be a sustainable way for by-product utilization to conserve natural resources and protect environment. HVFA concrete can play the role of a high-performance material that ma...HVFA （high-volume fly ash） concrete could be a sustainable way for by-product utilization to conserve natural resources and protect environment. HVFA concrete can play the role of a high-performance material that may be comparable to the conventional Portland cement concrete. The results of the research programme concerning the relationships between the composition of concrete （w/b ratio, fly ash content and type of cement） and their physical and mechanical properties are presented and discussed in the paper. It is found that the introduction of high-volume fly ash into concrete has caused a decrease in compressive strength at the early age of storage. The significant increase in strength was observed between 28 days and 90 days of curing. The high-volume fly ash concretes were characterized with lower water absorbability and sorptivity than control concrete.展开更多
A PV （photovoltaic） solar panels exhibit non-linear current--voltage characteristics, and according to the MPT （maximum power transform） theory, it can produce maximum power at only one particular OP （operating p...A PV （photovoltaic） solar panels exhibit non-linear current--voltage characteristics, and according to the MPT （maximum power transform） theory, it can produce maximum power at only one particular OP （operating point）; namely, when the source impedance matches with the load impedance, a match which cannot be guaranteed spontaneously. Furthermore, the MPP （maximum power point） changes with temperature and light intensity variations. Therefore, different algorithms have been developed for finding MPPT （maximum power point tracking） based on offline and online methods. Evaluating the performance of these algorithms for various PV systems operating under highly dynamic environments are essentials to ensure producing reliable, efficient, cost-effective and high performance systems. One possible approach for system evaluation is to use computer simulation. This paper addresses the use of Matlab software as a simulation tool for evaluating the performance of PV solar systems and finding the MPPT.展开更多
Located in the cold and very cold semiarid steppe climate zone, North Dakota boasts not only long cold winters but also hot summers, which significantly increases the energy consumption of buildings. In fact, North Da...Located in the cold and very cold semiarid steppe climate zone, North Dakota boasts not only long cold winters but also hot summers, which significantly increases the energy consumption of buildings. In fact, North Dakota has the highest energy consumption per capita in residential buildings （101 MM Btu in 2013）, and its energy consumption per capita in commercial buildings ranks the second （l 18 MM Btu in 2013） in the nation. When humans spend a long time indoors to escape the inclement weather, their health will be more susceptible to the indoor environment. In addition, North Dakota has the 3rd least number of green buildings certified by LEED （Leadership in Energy and Environmental Design） in the nation. This paper aims to investigate the status quo of buildings with respect to energy, health and sustainability in North Dakota, and attempts to propose strategies regarding research and higher education to rectify the current issues. These strategies include but not limited to forming the architectural engineering program, a comprehensive and interdisciplinary program in buildings.展开更多
Extreme ultraviolet lithography is most promising for the next generation lithography. However, debris from laser-produced plasma, particularly energetic ions, severely decreases the lifetime of extreme ultraviolet op...Extreme ultraviolet lithography is most promising for the next generation lithography. However, debris from laser-produced plasma, particularly energetic ions, severely decreases the lifetime of extreme ultraviolet optics. We measured the characteris- tics of ions from tin plasma by the time of flight method with a frequency-doubled Nd： YAG laser at the intensity of 3.5x1010 W/cm2 （532 nm, 8 ns）. Our measurement shows that the maximum and peak of tin ions energies from plasma under the above experimental parameters are about 4.2 and 1.8 keV, respectively. Moreover, it is found that kinetic energy angular distribution of tin ions can be fitted by cos0.8（θ）, where θ is the angle with respect to the target normal. We also investigated the mitigation effect of argon, helium gases to the tin ions, and found that tin ions from the plasma can be mitigated effectively at the pressure -38 mTorr for argon or -375 mTorr for helium, respectively.展开更多
基金supported by the National Natural Science Foundation of China (Grant No.51705145, 51779092)the National Key Research and Development Program of China (Grant No.2016YFC0300502 and No.2017YFC0307501)+1 种基金Natural Science Foundation of Hunan Province of China (Grant No.2019JJ50182)Research Foundation of Education Bureau of Hunan Province (Grant No.18B205)
文摘For the requirement of safe and stable operation,the combined sealing structure was used for reciprocating motion in the deep sea high-pressure environment,and the effects of different seawater depths and shaft movement speed on the sealing performance of the combined sealing structure were studied.The change rule of the sealing performance of the combined sealing structure of reciprocating motion under different working conditions is proved.The study shows that in the combined sealing structure of reciprocating movement,the Von Mises stress and the contact stress of the O-ring varies with the direction of the shaft movement.The Von Mises stress and contact stress of the O-ring,the Von Mises stress and the contact stress on each sealing lip of the slip ring gradually increase with the increasing of seawater depths.At the same time,the Von Mises stress of the O-ring which in the process of the shaft upward movement is greater than the shaft downward movement,making the shaft upward movement more likely to cause the O-ring relaxation and fatigue.The shaft movement speed has no significant influence on the Von Mises stress and contact stress of the O-ring.The research results provide theoretical guidance and technical support for the selection and optimization of the geometrical parameters of the combined sealing structure in the deep-sea high-pressure environment.
文摘The starches were isolated by alkaline extraction from white and red sorghum, predominant cultivars in the Sahara of Algeria. Morphological, thermal properties and amylose content of isolated starches were examined. The starches of two sorghum landraces of white and pigmented kernels growing in hyper arid environmental conditions showed significant differences in granule size, amylose content and thermal behavior which ultimately affect the physicochemical and functional properties. When observed using environmental scanning electron microscopy （ESEM）. The starch granules showed polyhedral shape. Some of them showed pinholes. The granular size ranged between 6.325-39.905 μm and 7.096-44.774 μm, respectively for white and red sorghum starches. The granule size distribution was unimodal. The amylose content in white sorghum starch （27.1%） was higher than that in red sorghum （24.8%）. Differential scanning calorimetry （DSC） analysis revealed that sorghum starches present higher temperatures at the peak （70.60℃ and 72.28℃ for white and red sorghum starches, respectively） and lower gelatinization enthalpies （9.087 J/g and 8.270 J/g for white and red sorghum starches, respectively） than other cereal starches. The determination of these properties is relevant to the comprehension of starch and starch-based foods digestibility in order to direct them towards the specific applications in food and nonfood sectors.
文摘HVFA （high-volume fly ash） concrete could be a sustainable way for by-product utilization to conserve natural resources and protect environment. HVFA concrete can play the role of a high-performance material that may be comparable to the conventional Portland cement concrete. The results of the research programme concerning the relationships between the composition of concrete （w/b ratio, fly ash content and type of cement） and their physical and mechanical properties are presented and discussed in the paper. It is found that the introduction of high-volume fly ash into concrete has caused a decrease in compressive strength at the early age of storage. The significant increase in strength was observed between 28 days and 90 days of curing. The high-volume fly ash concretes were characterized with lower water absorbability and sorptivity than control concrete.
文摘A PV （photovoltaic） solar panels exhibit non-linear current--voltage characteristics, and according to the MPT （maximum power transform） theory, it can produce maximum power at only one particular OP （operating point）; namely, when the source impedance matches with the load impedance, a match which cannot be guaranteed spontaneously. Furthermore, the MPP （maximum power point） changes with temperature and light intensity variations. Therefore, different algorithms have been developed for finding MPPT （maximum power point tracking） based on offline and online methods. Evaluating the performance of these algorithms for various PV systems operating under highly dynamic environments are essentials to ensure producing reliable, efficient, cost-effective and high performance systems. One possible approach for system evaluation is to use computer simulation. This paper addresses the use of Matlab software as a simulation tool for evaluating the performance of PV solar systems and finding the MPPT.
文摘Located in the cold and very cold semiarid steppe climate zone, North Dakota boasts not only long cold winters but also hot summers, which significantly increases the energy consumption of buildings. In fact, North Dakota has the highest energy consumption per capita in residential buildings （101 MM Btu in 2013）, and its energy consumption per capita in commercial buildings ranks the second （l 18 MM Btu in 2013） in the nation. When humans spend a long time indoors to escape the inclement weather, their health will be more susceptible to the indoor environment. In addition, North Dakota has the 3rd least number of green buildings certified by LEED （Leadership in Energy and Environmental Design） in the nation. This paper aims to investigate the status quo of buildings with respect to energy, health and sustainability in North Dakota, and attempts to propose strategies regarding research and higher education to rectify the current issues. These strategies include but not limited to forming the architectural engineering program, a comprehensive and interdisciplinary program in buildings.
基金supported by the National Natural Science Foundation ofChina (Grant Nos. 60978014,61178022 and 11074027)the Basic Research Fund from Sci. & Tech. Department of Jilin Province (Grant Nos.20100521,20100168 and 20111812)
文摘Extreme ultraviolet lithography is most promising for the next generation lithography. However, debris from laser-produced plasma, particularly energetic ions, severely decreases the lifetime of extreme ultraviolet optics. We measured the characteris- tics of ions from tin plasma by the time of flight method with a frequency-doubled Nd： YAG laser at the intensity of 3.5x1010 W/cm2 （532 nm, 8 ns）. Our measurement shows that the maximum and peak of tin ions energies from plasma under the above experimental parameters are about 4.2 and 1.8 keV, respectively. Moreover, it is found that kinetic energy angular distribution of tin ions can be fitted by cos0.8（θ）, where θ is the angle with respect to the target normal. We also investigated the mitigation effect of argon, helium gases to the tin ions, and found that tin ions from the plasma can be mitigated effectively at the pressure -38 mTorr for argon or -375 mTorr for helium, respectively.
