设计了一种基于0.7μm的In P HBT工艺设计的12位8GSps的电流舵型数模转换器(DAC)。采用双采样技术,将输出采样率提高为时钟频率的两倍。并且将双采样开关与电流开关分离以减小码间串扰。借鉴常开电流源法改进了电流源开关结构。新的结...设计了一种基于0.7μm的In P HBT工艺设计的12位8GSps的电流舵型数模转换器(DAC)。采用双采样技术,将输出采样率提高为时钟频率的两倍。并且将双采样开关与电流开关分离以减小码间串扰。借鉴常开电流源法改进了电流源开关结构。新的结构增大了输出阻抗和稳定性,抑制了谐波失真,提高了芯片动态性能。通过仿真结果得到,这款芯片功耗2.45 W,实现了0.4 LSB的微分非线性误差(DNL)和0.35 LSB的积分非线性误差(INL)。低频下无杂散动态范围(SFDR)为71.53 d Bc,信号频率接近奈奎斯特频率时最差的SFDR为50.54 d Bc。在整个第一奈奎斯特域内,SFDR都大于50 d Bc,满足高端测试仪器的应用要求。展开更多
Sudden earthquakes pose a threat to the running safety of trains on high-speed railway bridges,and the stiffness of piers is one of the factors affecting the dynamic response of train-track-bridge system.In this paper...Sudden earthquakes pose a threat to the running safety of trains on high-speed railway bridges,and the stiffness of piers is one of the factors affecting the dynamic response of train-track-bridge system.In this paper,a experiment of a train running on a high-speed railway bridge is performed based on a dynamic experiment system,and the corresponding numerical model is established.The reliability of the numerical model is verified by experiments.Then,the experiment and numerical data are analyzed to reveal the pier height effects on the running safety of trains on bridges.The results show that when the pier height changes,the frequency of the bridge below the 30 m pier height changes greater;the increase of pier height causes the transverse fundamental frequency of the bridge close to that of the train,and the shaking angle and lateral displacement of the train are the largest for bridge with 50 m pier,which increases the risk of derailment;with the pier height increases from 8 m to 50 m,the derailment coefficient obtained by numerical simulations increases by 75% on average,and the spectral intensity obtained by experiments increases by 120% on average,two indicators exhibit logarithmic variation.展开更多
随着雷达信号处理技术的发展,对于宽带线性调频(Linear Frequency Modulation)信号发生器的需求也变得十分迫切。基于Xilinx公司的直接数字频率合成(Direct Digital frequency Synthesis,DDS)IP核和高速数模转换器(Digital-to-Analog Co...随着雷达信号处理技术的发展,对于宽带线性调频(Linear Frequency Modulation)信号发生器的需求也变得十分迫切。基于Xilinx公司的直接数字频率合成(Direct Digital frequency Synthesis,DDS)IP核和高速数模转换器(Digital-to-Analog Converter,DAC)的架构,设计了一种可实时切换参数的多相宽带线性调频信号发生器,并完成仿真和上板验证。经仿真和上板验证,该信号发生器能够根据任务要求实时切换线性调频信号的参数,生成的信号指标准确,实现方法可靠,具有一定的实用价值。展开更多
文摘设计了一种基于0.7μm的In P HBT工艺设计的12位8GSps的电流舵型数模转换器(DAC)。采用双采样技术,将输出采样率提高为时钟频率的两倍。并且将双采样开关与电流开关分离以减小码间串扰。借鉴常开电流源法改进了电流源开关结构。新的结构增大了输出阻抗和稳定性,抑制了谐波失真,提高了芯片动态性能。通过仿真结果得到,这款芯片功耗2.45 W,实现了0.4 LSB的微分非线性误差(DNL)和0.35 LSB的积分非线性误差(INL)。低频下无杂散动态范围(SFDR)为71.53 d Bc,信号频率接近奈奎斯特频率时最差的SFDR为50.54 d Bc。在整个第一奈奎斯特域内,SFDR都大于50 d Bc,满足高端测试仪器的应用要求。
基金Projects(52022113,52278546)supported by the National Natural Science Foundation of ChinaProject(2020EEEVL0403)supported by the China Earthquake Administration。
文摘Sudden earthquakes pose a threat to the running safety of trains on high-speed railway bridges,and the stiffness of piers is one of the factors affecting the dynamic response of train-track-bridge system.In this paper,a experiment of a train running on a high-speed railway bridge is performed based on a dynamic experiment system,and the corresponding numerical model is established.The reliability of the numerical model is verified by experiments.Then,the experiment and numerical data are analyzed to reveal the pier height effects on the running safety of trains on bridges.The results show that when the pier height changes,the frequency of the bridge below the 30 m pier height changes greater;the increase of pier height causes the transverse fundamental frequency of the bridge close to that of the train,and the shaking angle and lateral displacement of the train are the largest for bridge with 50 m pier,which increases the risk of derailment;with the pier height increases from 8 m to 50 m,the derailment coefficient obtained by numerical simulations increases by 75% on average,and the spectral intensity obtained by experiments increases by 120% on average,two indicators exhibit logarithmic variation.
文摘随着雷达信号处理技术的发展,对于宽带线性调频(Linear Frequency Modulation)信号发生器的需求也变得十分迫切。基于Xilinx公司的直接数字频率合成(Direct Digital frequency Synthesis,DDS)IP核和高速数模转换器(Digital-to-Analog Converter,DAC)的架构,设计了一种可实时切换参数的多相宽带线性调频信号发生器,并完成仿真和上板验证。经仿真和上板验证,该信号发生器能够根据任务要求实时切换线性调频信号的参数,生成的信号指标准确,实现方法可靠,具有一定的实用价值。
