The risk of failure of the control loop can occur when a high-speed maglev train runs on viaduct.Meanwhile,the failure of the levitation magnets which balances the gravity of the maglev train could cause the train col...The risk of failure of the control loop can occur when a high-speed maglev train runs on viaduct.Meanwhile,the failure of the levitation magnets which balances the gravity of the maglev train could cause the train collision with track.To study the dynamic response of the train and the viaduct when the levitation magnet control loop failure occurs,a high-speed maglev train-viaduct coupling model,which includes a maglev controller fitted by measured force-gap data and considers the actual structure of train and viaduct,is established.Then the accuracy and effectiveness of the established approach are validated by comparing the computed dynamic responses and frequencies with the measurement results.After that,the dynamic responses of maglev train and viaduct are discussed under normal operation and control loop failures,and the most disadvantageous combination of control loop failures is obtained.The results show that when a single control loop fails,it only has a great influence on the failed electromagnet,and the maglev response of adjacent electromagnets has no obvious change and no collision occurs.But there is a risk of rail collisions when the dual control loop fails.展开更多
Recently, an interest in a hybrid system combining only the merits of the conventional wheel-rail system and Maglev propulsion system is growing as an alternative to high-speed maglev train. This hybrid-type system is...Recently, an interest in a hybrid system combining only the merits of the conventional wheel-rail system and Maglev propulsion system is growing as an alternative to high-speed maglev train. This hybrid-type system is based on wheel-rail method, but it enables to overcome the speed limitation by adhesion because it is operated through a non-contact method using a linear motor as a propulsion system and reduce the overall construction costs by its compatibility with the conventional railway systems. Therefore, a comparative analysis on electromagnetic characteristics according to the structural combinations on the stator-mover of LSM （linear synchronous motor） for VHST （very high speed train） maintaining the conventional wheel-rail method is conducted, and the structure of coreless superconducting LSM suitable for 600 km/h VHST is finally proposed in this paper.展开更多
With the increasing demand of higher travelling speed,a new streamlined high-speed maglev train has been designed to reach a speed of 600 km/h.To better capture the flow field structures around the maglev train,an imp...With the increasing demand of higher travelling speed,a new streamlined high-speed maglev train has been designed to reach a speed of 600 km/h.To better capture the flow field structures around the maglev train,an improved delayed detached eddy simulation(IDDES)is adopted to model the turbulence.Results show that the new maglev train has good aerodynamic load performance such as small drag coefficient contributing to energy conservation.The main frequencies of aerodynamic forces for each car have a scattered distribution.There are two pairs of counter-rotating large vortices in the non-streamlined part of the train that make the boundary layer thicker.Many high-intensity vortices are distributed in the narrow space between skirt plates or train floor and track.In the gap between the train floor and track(except near the tail car nose),the main frequency of vortex shedding remains constant and its strength increases exponentially in the streamwise direction.In the wake,the counter-rotating vortices gradually expand and reproduce some small vortices that move downward.The vortex has quite random and complex frequencydomain distribution characteristics in the wake.The maximum time-averaged velocity of the slipstream occurs near the nose of the head car,based on which,the track-side safety domain is divided.展开更多
基金Project(2021zzts0775) supported by the Independent Exploration and Innovation Project for Graduate Students of Central South University,ChinaProject(2021JJ30053) supported by the Hunan Natural Science Foundation,China。
文摘The risk of failure of the control loop can occur when a high-speed maglev train runs on viaduct.Meanwhile,the failure of the levitation magnets which balances the gravity of the maglev train could cause the train collision with track.To study the dynamic response of the train and the viaduct when the levitation magnet control loop failure occurs,a high-speed maglev train-viaduct coupling model,which includes a maglev controller fitted by measured force-gap data and considers the actual structure of train and viaduct,is established.Then the accuracy and effectiveness of the established approach are validated by comparing the computed dynamic responses and frequencies with the measurement results.After that,the dynamic responses of maglev train and viaduct are discussed under normal operation and control loop failures,and the most disadvantageous combination of control loop failures is obtained.The results show that when a single control loop fails,it only has a great influence on the failed electromagnet,and the maglev response of adjacent electromagnets has no obvious change and no collision occurs.But there is a risk of rail collisions when the dual control loop fails.
文摘Recently, an interest in a hybrid system combining only the merits of the conventional wheel-rail system and Maglev propulsion system is growing as an alternative to high-speed maglev train. This hybrid-type system is based on wheel-rail method, but it enables to overcome the speed limitation by adhesion because it is operated through a non-contact method using a linear motor as a propulsion system and reduce the overall construction costs by its compatibility with the conventional railway systems. Therefore, a comparative analysis on electromagnetic characteristics according to the structural combinations on the stator-mover of LSM （linear synchronous motor） for VHST （very high speed train） maintaining the conventional wheel-rail method is conducted, and the structure of coreless superconducting LSM suitable for 600 km/h VHST is finally proposed in this paper.
基金Project supported by the National Natural Science Foundation of China(No.51605397)the National Key R&D Program of China(No.2016YFB1200602-15)the Sichuan Provincial Science and Technology Support Program(No.2019YJ0227),China。
文摘With the increasing demand of higher travelling speed,a new streamlined high-speed maglev train has been designed to reach a speed of 600 km/h.To better capture the flow field structures around the maglev train,an improved delayed detached eddy simulation(IDDES)is adopted to model the turbulence.Results show that the new maglev train has good aerodynamic load performance such as small drag coefficient contributing to energy conservation.The main frequencies of aerodynamic forces for each car have a scattered distribution.There are two pairs of counter-rotating large vortices in the non-streamlined part of the train that make the boundary layer thicker.Many high-intensity vortices are distributed in the narrow space between skirt plates or train floor and track.In the gap between the train floor and track(except near the tail car nose),the main frequency of vortex shedding remains constant and its strength increases exponentially in the streamwise direction.In the wake,the counter-rotating vortices gradually expand and reproduce some small vortices that move downward.The vortex has quite random and complex frequencydomain distribution characteristics in the wake.The maximum time-averaged velocity of the slipstream occurs near the nose of the head car,based on which,the track-side safety domain is divided.
