Bimodal-grained Ti containing coarse and fine grains was fabricated by high-energy ball milling and spark plasma sintering (SPS). The microstructure and mechanical properties of the compacts sintered by Ti powders bal...Bimodal-grained Ti containing coarse and fine grains was fabricated by high-energy ball milling and spark plasma sintering (SPS). The microstructure and mechanical properties of the compacts sintered by Ti powders ball-milled for different time were studied. Experimental results indicated that when the ball-milling time increased, the microstructure of sintered Ti was firstly changed from coarse-grained to bimodal-grained structure, subsequently transformed to a homogeneous fine-grained structure. Compared with coarse-grained Ti and fine-grained Ti, bimodal-grained Ti exhibited balanced strength and ductility. The sample sintered from Ti powders ball-milled for 10 h consisting of 65.3% (volume fraction) fine-grained region (average grain size 1 μm) and 34.7% coarse-grained region (grain size > 5 μm) exhibited a compress strength of 1028 MPa as well as a plastic strain to failure of 22%.展开更多
In the leaching solution of high-sulfur bauxite roasted by sulfuric acid,a high concentration of aluminum presented along with titanium and iron.The present work was to remove Ti(IV)from the leach liquor by calcium al...In the leaching solution of high-sulfur bauxite roasted by sulfuric acid,a high concentration of aluminum presented along with titanium and iron.The present work was to remove Ti(IV)from the leach liquor by calcium alginate microsphere sorbent material(CA-P204)based on natural alginate impregnated with di-(2-ethylhexyl)phosphoric acid(D2EHPA)to purify leaching solution.Cation exchange and chelation make major contributions to the adsorption mechanism according to Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis.The results showed that Ti(IV)was successfully removed by the CA-P204 adsorbent from the Ti(IV)-Al(III)-Fe(III)ternary system with a dynamic column experiment.The removal rate of titanium was nearly 95%under optimal conditions and the maximum adsorption capacity was 66.79 mg/g at pH 1.0.Reusability of CA-P204 was evaluated over three consecutive adsorption/desorption cycles.The adsorption process was simple,low-cost,and had no waste discharge,suggesting that the CA-P204 was promising,efficient,and economical for removing Ti(IV)from high-sulfur bauxite leaching solution.展开更多
Large specific surface area is critical for Li4Ti5O12 to achieve good rate capacity and cycling stability, since it can increase the contact area between electrolyte/ electrode and shorten the transport paths for elec...Large specific surface area is critical for Li4Ti5O12 to achieve good rate capacity and cycling stability, since it can increase the contact area between electrolyte/ electrode and shorten the transport paths for electrons and lithium ions. In this study, hierarchical hollow Li4Ti5O12 urchin-like microspheres with ultra-high specific surface area of over 140 m2·g^-1 and diameter more than 500 nm have been successfully synthesized by combining the versatile sol-gel process and a hydrothermal reaction, and exhibit excellent electrochemical performance with a high specific capacity of 120 mA-h.g-1 at 20 C and long cycling stability of 〈 2% decay after 100 cycles. Ex situ electron energy loss spectroscopy （EELS） analysis of Li4Ti5O12 microspheres at different charge-discharge stages indicates that only a fraction of the TP＊ ions are reduced to Ti3＋ and a phase transformation occurs whereby the spinel phase Li4TisO12 is converted into the rock-salt phase Li7Ti5O12. Even after 100 cycles, the oxidation-reduction reaction between Ti3＋ and Ti4＋ can be carried out much more effectively on the surface of Li4Ti5O12 nanosheets than on commercially available Li4Ti5O12 particles. All the results suggest that these Li4Ti5O12 microspheres may be attractive candidate anode materials for lithium ion batteries.展开更多
基金Project(51104066)supported by the National Natural Science Foundation of ChinaProjects(2015A010105011,2015A020214008)supported by Science and Technology Program of Guangdong Province,ChinaProject(201505040925029)supported by Science and Technology Research Program of Guangzhou,China
文摘Bimodal-grained Ti containing coarse and fine grains was fabricated by high-energy ball milling and spark plasma sintering (SPS). The microstructure and mechanical properties of the compacts sintered by Ti powders ball-milled for different time were studied. Experimental results indicated that when the ball-milling time increased, the microstructure of sintered Ti was firstly changed from coarse-grained to bimodal-grained structure, subsequently transformed to a homogeneous fine-grained structure. Compared with coarse-grained Ti and fine-grained Ti, bimodal-grained Ti exhibited balanced strength and ductility. The sample sintered from Ti powders ball-milled for 10 h consisting of 65.3% (volume fraction) fine-grained region (average grain size 1 μm) and 34.7% coarse-grained region (grain size > 5 μm) exhibited a compress strength of 1028 MPa as well as a plastic strain to failure of 22%.
基金Project(21201094) supported by the National Natural Science Foundation of China
文摘In the leaching solution of high-sulfur bauxite roasted by sulfuric acid,a high concentration of aluminum presented along with titanium and iron.The present work was to remove Ti(IV)from the leach liquor by calcium alginate microsphere sorbent material(CA-P204)based on natural alginate impregnated with di-(2-ethylhexyl)phosphoric acid(D2EHPA)to purify leaching solution.Cation exchange and chelation make major contributions to the adsorption mechanism according to Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis.The results showed that Ti(IV)was successfully removed by the CA-P204 adsorbent from the Ti(IV)-Al(III)-Fe(III)ternary system with a dynamic column experiment.The removal rate of titanium was nearly 95%under optimal conditions and the maximum adsorption capacity was 66.79 mg/g at pH 1.0.Reusability of CA-P204 was evaluated over three consecutive adsorption/desorption cycles.The adsorption process was simple,low-cost,and had no waste discharge,suggesting that the CA-P204 was promising,efficient,and economical for removing Ti(IV)from high-sulfur bauxite leaching solution.
文摘Large specific surface area is critical for Li4Ti5O12 to achieve good rate capacity and cycling stability, since it can increase the contact area between electrolyte/ electrode and shorten the transport paths for electrons and lithium ions. In this study, hierarchical hollow Li4Ti5O12 urchin-like microspheres with ultra-high specific surface area of over 140 m2·g^-1 and diameter more than 500 nm have been successfully synthesized by combining the versatile sol-gel process and a hydrothermal reaction, and exhibit excellent electrochemical performance with a high specific capacity of 120 mA-h.g-1 at 20 C and long cycling stability of 〈 2% decay after 100 cycles. Ex situ electron energy loss spectroscopy （EELS） analysis of Li4Ti5O12 microspheres at different charge-discharge stages indicates that only a fraction of the TP＊ ions are reduced to Ti3＋ and a phase transformation occurs whereby the spinel phase Li4TisO12 is converted into the rock-salt phase Li7Ti5O12. Even after 100 cycles, the oxidation-reduction reaction between Ti3＋ and Ti4＋ can be carried out much more effectively on the surface of Li4Ti5O12 nanosheets than on commercially available Li4Ti5O12 particles. All the results suggest that these Li4Ti5O12 microspheres may be attractive candidate anode materials for lithium ion batteries.
