高分辨高阶数紫外／可见导数光谱及其应用

简述高分辩高阶数紫外／可见导数光谱法的基本概况及其在分析化学中的应用。并列举一些实例实例。

Numerical simulation of LWD resistivity response of carbonate formation using self-adaptive hp-FEM

Most of the carbonate formation are highly heterogeneous with cavities of different sizes, which makes the prediction of cavity-filled reservoir in carbonate rocks difficult. Large cavities in carbonate formations pose serious threat to drilling operations. Logging-whiledrilling （LWD） is currently used to accurately identify and evaluate cavities in reservoirs during drilling. In this study, we use the self-adaptive hp-FEM algorithm simulate and calculate the LWD resistivity responses of fracture-cavity reservoir cavities. Compared with the traditional h-FEM method, the self-adaptive hp-FEM algorithm has the characteristics of the self-adaptive mesh refinement and the calculations exponentially converge to highly accurate solutions. Using numerical simulations, we investigated the effect of the cavity size, distance between cavity and borehole, and transmitted frequency on the LWD resistivity response. Based on the results, a method for recognizing cavities is proposed. This research can provide the theoretical basis for the accurate identification and quantitative evaluation of various carbonate reservoirs with cavities encountered in practice.

Selecting the optimum location of the corner using gravity gradient method

The conventional gravity gradient method to plot the geologic body location is fuzzy. When the depth is large and the geologic body is small, the Vzz and Vzx derivative errors are also large. We describe that using the status distinguishing factor to optimally determine the comer location is more accurate than the conventional higher-order derivative method. Thus, a better small geologic body and fault resolution is obtained by using the gravity gradient method and trial theoretical model calculation. The actual data is better processed, providing a better basis for prospecting and determination of subsurface geologic structure.

High-order generalized screen propagator migration based on particle swarm optimization

Various migration methods have been proposed to image high-angle geological structures and media with strong lateral velocity variations; however, the problems of low precision and high computational cost remain unresolved. To describe the seismic wave propagation in media with lateral velocity variations and to image high-angle structures, we propose the generalized screen propagator based on particle swarm optimization （PSO-GSP）, for the precise fitting of the single-square-root operator. We use the 2D SEG/EAGE salt model to test the proposed PSO-GSP migration method to image the faults beneath the salt dome and compare the results to those of the conventional high-order generalized screen propagator （GSP） migration and split-step Fourier （SSF） migration. Moreover, we use 2D marine data from the South China Sea to show that the PSO-GSP migration can better image strong reflectors than conventional imaging methods.

我创造了当今世界“幻方”之最

"幻方"的奇妙深邃,使你越是接近它,越为之倾倒;越是钻研它,越为之赞叹。本刊曾于今年第5期发表《奥妙无穷的古题》一文,加以介绍。(藉此更正一下:该文中的九幅幻方图都被印刷成长方形,这是不恰当的,幻方图理应绘制为正方形。)这里再对我国今年的一项幻方研究新成果——目前已知最大243阶幻方,作一介绍,期望广大读者了解我国的这一领先世界的业绩内容。

NUMERICAL SIMULATIONS OF EVOLUTIONS FROM WALL PULSE TO TURBULENT COHE RENT STRUCTURES

The high order compact d if ference method is developed for solving the perturbation equations based on Navi er Stokes equations, and is used in studying complex evolution processes from w all negative pulse to the turbulent coherent structure in the channel flow. Th is method contains three dimensional coupling difference scheme with high accur acy and high resolution, and the high order time splitting methods. Compared with the general spectral method, the method can be used to research turbule nt coherent structure under more general boundary conditions and in flow domains . In this paper, the generation and evolution of the turbulent coherent structur es ind uced by wall pulse in the channel flow are simulated, and the basic characterist ics and rules of the turbulent coherent structure are shown. Computational r esults indicate that a wall negative pulse is more convenient than the resonant three wave model.

HIGH-ORDER RUNGE-KUTTA DISCONTINUOUS GALERKIN FINITE ELEMENT METHOD FOR 2-D RESONATOR PROBLEM

The Runge-Kutta discontinuous Galerkin finite element method （RK-DGFEM） is introduced to solve the classical resonator problem in the time domain. DGFEM uses unstructured grid discretization in the space domain and it is explicit in the time domain. Consequently it is a best mixture of FEM and finite volume method （FVM）. RK-DGFEM can obtain local high-order accuracy by using high-order polynomial basis. Numerical experiments of transverse magnetic （TM） wave propagation in a 2-D resonator are performed. A high-order Lagrange polynomial basis is adopted. Numerical results agree well with analytical solution. And different order Lagrange interpolation polynomial basis impacts on simulation result accuracy are discussed. Computational results indicate that the accuracy is evidently improved when the order of interpolation basis is increased. Finally, L^2 errors of different order polynomial basis in RK-DGFEM are presented. Computational results show that L^2 error declines exponentially as the order of basis increases.

Generalizations of Euler Numbers and Euler Numbers of Higher Order

The purpose of this paper is to define the generalized Euler numbers and the generalized Euler numbers of higher order, their recursion formula and some properties were established, accordingly Euler numbers and Euler numbers of higher order were extended.

High-Order Radial Derivatives of Harmonic Function and Gravity Anomaly

The first through ninth radial derivatives of a harmonic function and gravity anomaly are derived in this paper. These derivatives can be used in the analytical continuation application. For the downward continuation of gravity anomaly, the Taylor series approach developed in the paper is equivalent theoretically to but more efficient and storage-saving computationally than the well-known gradient operator approach. Numerical simulation shows that Taylor series expansion constructed by the derived formulas for the radial derivatives of gravity disturbance is still convergent for height up to 4 km.

The Higher Derivatives of Bianalytic Functions

By using the Cauchy integral formula of bianalytic functions, the formula of higher derivatives of bianalytic functions and Weierstrass Theorem are obtained.

The Partition of Unity Method for High-Order Finite Volume Schemes Using Radial Basis Functions Reconstruction

This paper introduces the use of partition of unity method for the development of a high order finite volume discretization scheme on unstructured grids for solving diffusion models based on partial differential equations.The unknown function and its gradient can be accurately reconstructed using high order optimal recovery based on radial basis functions.The methodology proposed is applied to the noise removal problem in functional surfaces and images.Numerical results demonstrate the effectiveness of the new numerical approach and provide experimental order of convergence.

Construction of Wave-free Potentials and Multipoles in a Two-layer Fluid Having Free-surface Boundary Condition with Higher-order Derivatives

There is a large class of problems in the field of fluid structure interaction where higher-order boundary conditions arise for a second-order partial differential equation. Various methods are being used to tackle these kind of mixed boundary-value problems associated with the Laplace’s equation （or Helmholtz equation） arising in the study of waves propagating through solids or fluids. One of the widely used methods in wave structure interaction is the multipole expansion method. This expansion involves a general combination of a regular wave, a wave source, a wave dipole and a regular wave-free part. The wave-free part can be further expanded in terms of wave-free multipoles which are termed as wave-free potentials. These are singular solutions of Laplace’s equation or two-dimensional Helmholz equation. Construction of these wave-free potentials and multipoles are presented here in a systematic manner for a number of situations such as two-dimensional non-oblique and oblique waves, three dimensional waves in two-layer fluid with free surface condition with higher order partial derivative are considered. In particular, these are obtained taking into account of the effect of the presence of surface tension at the free surface and also in the presence of an ice-cover modelled as a thin elastic plate. Also for limiting case, it can be shown that the multipoles and wave-free potential functions go over to the single layer multipoles and wave-free potential.

Using a Time-domain Higher-order Boundary Element Method to Simulate Wave and Current Diffraction from a 3-D Body

To study wave-current actions on 3-D bodies a time-domain numerical model was established using a higher-order boundary element method(HOBEM).By assuming small flow velocities,the velocity potential could be expressed for linear and higher order components by perturbation expansion.A 4th-order Runge-Kutta method was applied for time marching.An artificial damping layer was adopted at the outer zone of the free surface mesh to dissipate scattering waves.Validation of the numerical method was carried out on run-up,wave exciting forces,and mean drift forces for wave-currents acting on a bottom-mounted vertical cylinder.The results were in close agreement with the results of a frequency-domain method and a published time-domain method.The model was then applied to compute wave-current forces and run-up on a Seastar mini tension-leg platform.

Distributed wide field electromagnetic method based on high-order 2^(n) sequence pseudo random signal

To make three-dimensional electromagnetic exploration achievable,the distributed wide field electromagnetic method(WFEM)based on the high-order 2^(n) sequence pseudo-random signal is proposed and realized.In this method,only one set of high-order pseudo-random waveforms,which contains all target frequencies,is needed.Based on high-order sequence pseudo-random signal construction algorithm,the waveform can be customized according to different exploration tasks.And the receivers are independent with each other and dynamically adjust the acquisition parameters according to different requirements.A field test in the deep iron ore of Qihe−Yucheng showed that the distributed WFEM based on high-order pseudo-random signal realizes the high-efficiency acquisition of massive electromagnetic data in quite a short time.Compared with traditional controlled-source electromagnetic methods,the distributed WFEM is much more efficient.Distributed WFEM can be applied to the large scale and high-resolution exploration for deep resources and minerals.

Higher-Order Lagrangian Equations of Higher-Order Motive Mechanical System

In this paper, if the condition of variation δt = 0 is satisfied, the higher-order Lagrangian equations and higher-order Hamilton＇s equations, which show the consistency with the results of traditional analytical mechanics, are obtained from the higher-order Lagrangian equations and higher-order Hamilton＇s equations. The results can enrich the theory of analytical mechanics.

Determination of fractional energy loss of waves in nearshore waters using an improved high-order Boussinesq-type model

Fractional energy losses of waves due to wave breaking when passing over a submerged bar are studied systematically using a modified numerical code that is based on the high-order Boussinesq-type equations.The model is first tested by the additional experimental data,and the model's capability of simulating the wave transformation over both gentle slope and steep slope is demonstrated.Then,the model's breaking index is replaced and tested.The new breaking index,which is optimized from the several breaking indices,is not sensitive to the spatial grid length and includes the bottom slopes.Numerical tests show that the modified model with the new breaking index is more stable and efficient for the shallow-water wave breaking.Finally,the modified model is used to study the fractional energy losses for the regular waves propagating and breaking over a submerged bar.Our results have revealed that how the nonlinearity and the dispersion of the incident waves as well as the dimensionless bar height(normalized by water depth) dominate the fractional energy losses.It is also found that the bar slope(limited to gentle slopes that less than 1:10) and the dimensionless bar length(normalized by incident wave length) have negligible effects on the fractional energy losses.

Development and Comparison of Numerical Fluxes for LWDG Methods

The discontinuous Galerkin （DO） or local discontinuous Galerkin （LDG） method is a spatial discretization procedure for convection-diffusion equations, which employs useful features from high resolution finite volume schemes, such as the exact or approximate Riemann solvers serving as numerical fluxes and limiters. The Lax- Wendroff time discretization procedure is an altemative method for time discretization to the popular total variation diminishing （TVD） Runge-Kutta time discretizations. In this paper, we develop fluxes for the method of DG with Lax-Wendroff time discretization procedure （LWDG） based on different numerical fluxes for finite volume or finite difference schemes, including the first-order monotone fluxes such as the Lax-Friedfichs flux, Godunov flux, the Engquist-Osher flux etc. and the second-order TVD fluxes. We systematically investigate the performance of the LWDG methods based on these different numerical fluxes for convection terms with the objective of obtaining better performance by choosing suitable numerical fluxes. The detailed numerical study is mainly performed for the one-dimensional system case, addressing the issues of CPU cost, accuracy, non-oscillatory property, and resolution of discontinuities. Numerical tests are also performed for two dimensional systems.

Numerical Simulation for Water Entry of a Wedge at Varying Speed by a High Order Boundary Element Method

A high order boundary element method was developed for the complex velocity potential problem. The method ensures not only the continuity of the potential at the nodes of each element but also the velocity. It can be applied to a variety of velocity potential problems. The present paper, however, focused on its application to the problem of water entry of a wedge with varying speed. The continuity of the velocity achieved herein is particularly important for this kind of nonlinear free surface flow problem, because when the time stepping method is used, the free surface is updated through the velocity obtained at each node and the accuracy of the velocity is therefore crucial. Calculation was made for a case when the distance S that the wedge has travelled and time t follow the relationship s=Dtα, where D and α are constants, which is found to lead to a self similar flow field when the effect due to gravity is ignored.

Simulation of crack coalescence mechanism underneath single and double disc cutters by higher order displacement discontinuity method

The present research is focused on the numerical crack coalescence analysis of the micro-cracks and cracks produced during the cutting action of TBM disc cutters. The linear elastic fracture mechanics(LEFM) concepts and the maximum tangential stress criterion are used to investigate the micro crack propagation and its direction underneath the excavating discs. A higher order displacement discontinuity method with quadratic displacement discontinuity elements is used to estimate the stress intensity factors near the crack tips. Rock cutting mechanisms under single and double type discs are simulated by the proposed numerical method.The main purposes of the present modeling are to simulate the chip formation process of indented rocks by single and double discs.The effects of specific disc parameters(except speed) on the thrust force Ft, the rolling force Fr, and the specific energy ES are investigated. It has been shown that the specific energy(energy required to cut through a unit volume of rock) of the double disc is less than that of the single disc. Crack propagation in rocks under disc cutters is numerically modeled and the optimum ratio of disc spacing S to penetration depth Pd(i.e. S/Pd ratio) of about 10 is obtained, which is in good agreement with the theoretical and experimental results cited in the literature.

Objective Reduction Solutions to Higher-Order Boussinesq System in (2+1)-Dimensions

With the help of an objective reduction approach （ORA）, abundant exact solutions of （2＋1）-dimensional higher-order Boussinesq system （including some hyperboloid function solutions, trigonometric function solutions, and a rational function solution） are obtained. It is shown that some novel soliton structures, like single linearity soliton structure, breath soliton structure, single linearity y-periodic solitary wave structure, libration dromion structure, and kink-like multisoliton structure with actual physical meaning exist in the （2＋1）-dimensional higher-order Boussinesq system.