Based on non-targeted metabolomics for differential components screening of Rosae Chinensis Flos and Rosae Rugosae Flos and their quality evaluation

Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants have some differences in efficacy,but the flower buds are easily confused for similar traits.In addition,large-scale cultivation of ornamental rose flowers may lead to a decrease in the effective components of medicinal roses.Therefore,it is necessary to study the chemical composition and make quality evaluation of Rosae Chinensis Flos(Yueji)and Rosae Rugosae Flos(Meigui).Methods:In this study,40 batches of samples including Meigui and Yueji from different regions in China were collected to establish high-performance liquid chromatography fingerprints.Then,the fingerprints data was analyzed using principal component analysis,hierarchical cluster analysis,and partial least squares discriminant analysis analysis chemometrics to obtain information on intergroup differences,and non-targeted metabolomic techniques were applied to identify and compare chemical compositions of samples which were chosen from groups with large differences.Differential compounds were screened by orthogonal partial least-squares discriminant analysis and S-plot,and finally multi-component quantification was performed to comprehensively evaluate the quality of Yueji and Meigui.Results:The similarity between the fingerprints of 40 batches roses and the reference print R was 0.73 to 0.93,indicating that there were similarities and differences between the samples.Through principal component analysis and hierarchical cluster analysis of fingerprints data,the samples from different origins and varieties were intuitively divided into four groups.Partial least-squares discriminant analysis analysis showed that Meigui and Yueji cluster into two categories and the model was reliable.A total of 89 compounds were identified by high resolution mass spectrometry,mainly were flavonoids and flavonoid glycosides,as well as phenolic acids.Eight differential components were screened out by orthogonal partial least-squares discriminant analysis and S-plot analysis.Quantitative analyses of the eight compounds,including gallic acid,ellagic acid,hyperoside,isoquercitrin,etc.,showed that Yueji was generally richer in phenolic acids and flavonoids than Meigui,and the quality of Yueji from Shandong and Hebei was better.It is worth noting that Xinjiang rose is rich in various components,which is worth focusing on more in-depth research.Conclusion:In this study,the fingerprints of Meigui and Yueji were established.The chemical components information of roses was further improved based on non-targeted metabolomics and mass spectrometry technology.At the same time,eight differential components of Meigui and Yueji were screened out and quantitatively analyzed.The research results provided a scientific basis for the quality control and rational development and utilization of Rosae Chinensis Flos and Rosae Rugosae Flos,and also laid a foundation for the study of their pharmacodynamic material basis.

Comparison of Nutrient Components in the Muscle of Wild and Artificially Reared Takifugu obscurus

[Objective] The aim of this study was to evaluate the nutritive value of Takifugu obscurus and provide the scientific basis for artificially feed research.[Method] The nutrient components and nutritive qualities in the muscle of wild and artificially reared Takifugu obscurus were comparatively analyzed.[Result] The contents of crude protein,crude fat,crude ash,total amino acids,essential amino acids and half essential amino acid in the muscle of wild Takifugu obscurus were all higher than those of the artificially reared.The content of four delicious amino acids in the muscle of wild and artificially reared Takifugu obscurus was 17.59% and 14.44%(percentage of dry weight),respectively.The essential amino acid index(EAAI)was 52 and 40 separately,and the constitutional rate of the essential amino acids met the FAO/WHO standard.Valine was the first limiting amino acid of Takifugu obscurus.[Conclusion] The muscle of wild and artificially reared Takifugu obscurus were all high quality food full of animal protein,while the protein nutritive value of wild Takifugu obscurus was higher than that of the artificially reared.

Evaluation of Chinese Cabbage Sensory Quality and Its Relationship with Contents of Main Nutrient Components

In order to establish a comprehensive evaluation system for quality of Chinese cabbage, 28 Chinese cabbage cultivars or inbreeds were selected as ex- perimental materials to identify the raw and cooked taste and determine the nutrient component contents, and the subjective factors （taste） and objective factors （nutrient component contents） influencing the sensory quality of Chinese cabbage were ana- lyzed by multiple regression and path analysis. The results showed that two regres- sion equations were obtained： yr （raw quality）=0.310 3＋0.254 0xl （juiciness）＋0.176 2 x2 （sweetness）＋0.221 6x3 （crispness）＋0.319 9x4 （flavor）; Yc （cooked quality）=0.204 4＋ 0.250 9 xs （residue）＋0.246 9x6 （cooked sweetness）＋0.182 5x7 （softness）＋0.323 lx8 （cooked flavor）. The path analysis results showed that among the sensory indices, the total coefficients of sweetness and juiciness were 0.445 3 and 0.427 6, respec- tively. It indicated they were the main factors affecting the raw quality of Chinese cab- bage, followed by flavor and crispness. Sweetness, with total coefficient of 0.515 2, showed the greatest effect on the cooked quality of Chinese cabbage, followed by residue, cooked flavor and softness. The effects of nutrient component contents on the sensory quality of Chinese cabbage were further analyzed, and the regression equa- tions were obtained： y, =-32.192 0＋0.389 3xw （moisture content）＋1.169 8x~ （soluble sugar content）; Yc = 7.497 1＋0.732 6xs - 5.668 8x, （organic acid content）-2.176 3x~ （crude fiber content）. The standardized regression coefficients of soluble sugar con- tent were all highest with the value of 0.580 7 in the raw quality regression equa- tion and 0.325 0 in the cooked quality one, indicating that among the six nutrient components, the soluble sugar content was the main factor affecting both raw and cooked quality of Chinese cabbage. This study will provide certain basis for quality evaluation, selection and breeding of high-quality Chinese cabbage.

Nontraditional energy-assisted mechanical machining of difficult-to-cut materials and components in aerospace community:a comparative analysis

The aerospace community widely uses difficult-to-cut materials,such as titanium alloys,high-temperature alloys,metal/ceramic/polymer matrix composites,hard and brittle materials,and geometrically complex components,such as thin-walled structures,microchannels,and complex surfaces.Mechanical machining is the main material removal process for the vast majority of aerospace components.However,many problems exist,including severe and rapid tool wear,low machining efficiency,and poor surface integrity.Nontraditional energy-assisted mechanical machining is a hybrid process that uses nontraditional energies(vibration,laser,electricity,etc)to improve the machinability of local materials and decrease the burden of mechanical machining.This provides a feasible and promising method to improve the material removal rate and surface quality,reduce process forces,and prolong tool life.However,systematic reviews of this technology are lacking with respect to the current research status and development direction.This paper reviews the recent progress in the nontraditional energy-assisted mechanical machining of difficult-to-cut materials and components in the aerospace community.In addition,this paper focuses on the processing principles,material responses under nontraditional energy,resultant forces and temperatures,material removal mechanisms,and applications of these processes,including vibration-,laser-,electric-,magnetic-,chemical-,advanced coolant-,and hybrid nontraditional energy-assisted mechanical machining.Finally,a comprehensive summary of the principles,advantages,and limitations of each hybrid process is provided,and future perspectives on forward design,device development,and sustainability of nontraditional energy-assisted mechanical machining processes are discussed.

Effects of main components on energy output characteristics of thermobaric explosive——A case study of typical formulations

As a kind of high-efficiency explosive with compound destructive capability, the energy output law of thermobaric explosives has been receiving great attention. In order to investigate the effects of main components on the explosive characteristics of thermobaric explosives, various high explosives and oxidants were selected to formulate five different types of thermobaric explosive. Then they were tested in both open space and closed space respectively. Pressure measurement system, high-speed camera,infrared thermal imager and multispectral temperature measurement system were used for pressure,temperature and fireball recording. The effects of different components on the explosive characteristics of thermobaric explosive were analyzed. The results showed that in open space, the overpressure is dominated by the high explosives content in the formulation. The addition of the oxidants will decrease the explosion overpressure but will increase the duration and overall brightness of the fireball. While in closed space, the quasi-static pressure formed after the explosion is positively correlated with the temperature and gas production. In addition, it was found that the differences in shell constraints can also alter the afterburning reaction of thermobaric explosives, thus affecting their energy output characteristics. PVC shell constraint obviously increases the overpressure and makes the fireball burn more violently.

Aboveground nutrient components of Eucalyptus camaldulensis and E. grandis in semiarid Brazil under the nature and the mycorrhizal inoculation conditions

A study was conducted to evaluate the aboveground biomass, nutrient content and the percentages of mycorrhizal colonization in Eucalyptus camaldulensis and Eucalyptus grand＆ plantations in the semiarid region （ 15° 09′ S 43° 49′ W） in the north of the State of Minas Gerais in Brazil. Results show that the total above-ground biomass （dry matter） was 33.6 Mg.ha^-1 for E. camaldulensis and 53.1 Mg·ha^-1 for E. grandis. The biomass of the stem wood, leaves, branches, and stein bark for E. camaldulens accounted for 64.4%, 19.6%, 15.4%, and 0.6% of the total biomass, respectively （Table 2）; meanwhile a similar partition of the total above-ground biomass was also found for E. grand＆. The dry matter of leaves and branches of E. camaldulensis accounted for 35% of total biomass, and the contents of N, P, K, Ca, Mg, and S in leaves and branches accounted for 15.5%, 0.7%, 12.3%, 22.6%, 1.9%, and 1.4% of those in total above-ground biomass, respectively. In the trunk （bark and wood）, nutrient accumulation in general was lower. Nutrient content of E. grand＆ presented little variation compared with that orE. camaJd^llensis. Wood localized in superior parts of trunk presented a higher concentration of P and bark contained significant amounts of nutrients, especially in E. grand＆. This indicated that leaving vegetal waste is of importance on the site in reducing the loss of tree productivity in this semi-arid region. The two species showed mycotrophy.

Comparative Analysis of Nutrient Components of Yak Milk from Different Regions

[ Objective] To analyze the nutrient components of yak milk from different regions and provide a theoretical basis for further development and utilization of yak milk. [ Method] A total of 150 yak milk samples were collected from Tianzhu County, Maqu County and Tianjun County, and 90 yak milk samples were collected from three different yak farms in Tianzhu County. The content of milk protein, milk fat, fat solid, non-fat solid and lactose, as well as the density, freezing point and acidity were determined, respectively. [ Result] The milk protein content and milk fat content had significant differences between three regions. With the increasing altitude, the milk protein and milk fat were increased, but the content of fat solid, non-fat solid and lactose, density, freezing point and acidity had no obviously regular change. The milk protein content and milk fat content had no significant difference between three yak farms in Tianzhu County. [ Conclusion] The altitude may affect the milk protein content and milk fat content of yak milk.

Using deep neural networks coupled with principal component analysis for ore production forecasting at open-pit mines

Ore production is usually affected by multiple influencing inputs at open-pit mines.Nevertheless,the complex nonlinear relationships between these inputs and ore production remain unclear.This becomes even more challenging when training data(e.g.truck haulage information and weather conditions)are massive.In machine learning(ML)algorithms,deep neural network(DNN)is a superior method for processing nonlinear and massive data by adjusting the amount of neurons and hidden layers.This study adopted DNN to forecast ore production using truck haulage information and weather conditions at open-pit mines as training data.Before the prediction models were built,principal component analysis(PCA)was employed to reduce the data dimensionality and eliminate the multicollinearity among highly correlated input variables.To verify the superiority of DNN,three ANNs containing only one hidden layer and six traditional ML models were established as benchmark models.The DNN model with multiple hidden layers performed better than the ANN models with a single hidden layer.The DNN model outperformed the extensively applied benchmark models in predicting ore production.This can provide engineers and researchers with an accurate method to forecast ore production,which helps make sound budgetary decisions and mine planning at open-pit mines.

Exploring the factors affecting carbon and nutrient concentrations in tree biomass components in natural forests,forest plantations and short rotation forestry

Background: Coupling biomass models with nutrient concentrations can provide sound estimations of carbon and nutrient contents, enabling the improvement of carbon and nutrient balance in forest ecosystems. Although nutrient concentrations are often assumed to be constant for some species and specific tree components, at least in mature stands,the concentrations usually vary with age, site index and even with tree density. The main objective of this study was to evaluate the sources of variation in nutrient concentrations in biomass compartments usually removed during harvesting operations, covering a range of species and management conditions: semi-natural forest, conventional forest plantations and short rotation forestry(SRF). Five species(Betula pubescens, Quercus robur, Eucalyptus globulus, Eucalyptus nitens and Populus spp.) and 14 genotypes were considered. A total of 430 trees were sampled in 61 plots to obtain 6 biomass components:leaves, twigs, thin branches, thick branches, bark and wood. Aboveground leafless biomass was pooled together forpoplar.The concentrations of C, N, K, P, Ca, Mg, S, Fe, Mn, Cu, Zn and B were measured and the total biomass of each sampled tree and plot were determined. The data were analysed using boosted regression trees and conventional techniques.Results: The main sources of variation in nutrient concentrations were biomass component > > genotype(species) ≈ age >tree diameter. The concentrations of Ca, Mg and K were most strongly affected by genotype and age. The concentrations of P, K, Ca, Mg, S and Cu in the wood component decreased with age, whereas C concentrations increased, with a trend to reach 50% in the older trees. In the SRF, interamerican poplar and P. trichocarpa genotypes were comparatively more efficient in terms of Ca and K nutrient assimilation index(NAI)(+65-85%) than eucalypts, mainly because leafless biomass can be removed. In the conventional eucalypt plantations(rotation 15 years), debarking the wood at logging(savings of225% of Ca and 254% of Mg for E. globulus) or the use of selected genotypes(savings of 45% of P and 35% of Ca) will provide wood at a relatively lower nutrient cost. Considering all the E. globulus genotypes together, the management for pulp with removal of debarked wood shows NAI values well above(x 1.7-x 3.9) the ones found for poplar or eucalypt SRF and also higher(x 1.6-x4.0) than the ones found for oak and birch managed in medium or long rotations.The annual rates of nutrient removal were low in the native broadleaved species but the rates of available soil nutrients removed were high as compared to poplar or eucalypts. Management of native broadleaved species should consider nutrient stability through selection of the biomass compartments removed.(Continued on next page)(Continued from previous page)Conclusions: The nutrient assimilation index is higher in poplar grown under short rotation forestry management than in the other systems considered. Nutrient management of fast growing eucalyptus plantations could be improved by selecting efficient genotypes and limiting removal of wood. The values of the nutrient assimilation index are lower in the natural stands of native broadleaved species than in the other systems considered.

Discrimination of polysorbate 20 by high-performance liquid chromatography-charged aerosol detection and characterization for components by expanding compound database and library

Analyzing polysorbate 20(PS20)composition and the impact of each component on stability and safety is crucial due to formulation variations and individual tolerance.The similar structures and polarities of PS20 components make accurate separation,identification,and quantification challenging.In this work,a high-resolution quantitative method was developed using single-dimensional high-performance liquid chromatography(HPLC)with charged aerosol detection(CAD)to separate 18 key components with multiple esters.The separated components were characterized by ultra-high-performance liquid chromatography-quadrupole time-of-flight mass spectrometry(UHPLC-Q-TOF-MS)with an identical gradient as the HPLC-CAD analysis.The polysorbate compound database and library were expanded over 7-time compared to the commercial database.The method investigated differences in PS20 samples from various origins and grades for different dosage forms to evaluate the composition-process relationship.UHPLC-Q-TOF-MS identified 1329 to 1511 compounds in 4 batches of PS20 from different sources.The method observed the impact of 4 degradation conditions on peak components,identifying stable components and their tendencies to change.HPLC-CAD and UHPLC-Q-TOF-MS results provided insights into fingerprint differences,distinguishing quasi products.

Multi-omics analyses provide insights into the evolutionary history and the synthesis of medicinal components of the Chinese wingnut

Chinese wingnut(Pterocarya stenoptera)is a medicinally and economically important tree species within the family Juglandaceae.However,the lack of high-quality reference genome has hindered its in-depth research.In this study,we successfully assembled its chromosome-level genome and performed multiomics analyses to address its evolutionary history and synthesis of medicinal components.A thorough examination of genomes has uncovered a significant expansion in the Lateral Organ Boundaries Domain gene family among the winged group in Juglandaceae.This notable increase may be attributed to their frequent exposure to flood-prone environments.After further differentiation between Chinese wingnut and Cyclocarya paliurus,significant positive selection occurred on the genes of NADH dehydrogenase related to mitochondrial aerobic respiration in Chinese wingnut,enhancing its ability to cope with waterlogging stress.Comparative genomic analysis revealed Chinese wingnut evolved more unique genes related to arginine synthesis,potentially endowing it with a higher capacity to purify nutrient-rich water bodies.Expansion of terpene synthase families enables the production of increased quantities of terpenoid volatiles,potentially serving as an evolved defense mechanism against herbivorous insects.Through combined transcriptomic and metabolomic analysis,we identified the candidate genes involved in the synthesis of terpenoid volatiles.Our study offers essential genetic resources for Chinese wingnut,unveiling its evolutionary history and identifying key genes linked to the production of terpenoid volatiles.

Effect of Planting Date on Yield and Yield Components of Grain Sorghum Hybrids

In Kansas, productivity of grain sorghum [Sorghum bicolor (L.) Moench] is affected by weather conditions at planting and during pollination. Planting date management and selection of hybrid maturity group can help to avoid severe environmental stresses during these sensitive stages. The hypothesis of the study was that late May planting improves grain sorghum yield and yield components compared with late June planting. The objectives of this research were to investigate the influence of planting dates yield and yield components of different grain sorghum hybrids, and to determine the optimal planting date and hybrid combination for maximum biomass and grains production. Three sorghum hybrids (early, medium, and late maturing) were planted in late May and late June without irrigation in Kansas at Manhattan/Ashland Bottom Research Station, and Hutchinson in 2010;and at Manhattan/North Farm and Hutchinson in 2011. Data on dry matter production, yield and yield components were collected. Grain yield and yield components were influenced by planting date depending on environmental conditions. At Manhattan (2010), greater grain yield, number of heads per plant, were obtained with late-June planting compared with late May planting, while at Hutchinson (2010) greater yield was obtained with late May planting for all hybrids. The yield component most affected at Hutchinson was the number of kernels∙panicle−1 and plant density. Late-May planting was favorable for late maturing hybrid (P84G62) in all locations. However, the yield of early maturing hybrid (DKS 28-05) and medium maturing hybrid (DKS 37-07) was less affected by delayed planting. The effects of planting dates on yield and yield components of grain sorghum hybrids were found to be variable among hybrid maturity groups and locations.

Simultaneous purification of minor components in natural products using twin-column recycling chromatography with a step solvent gradient

The isolation of minor components from complex natural product matrices presents a significant challenge in the field of purification science due to their low concentrations and the presence of structurally similar compounds.This study introduces an optimized twin-column recycling chromatography method for the efficient and simultaneous purification of these elusive constituents.By introducing water at a small flowing rate between the twin columns,a step solvent gradient is created,by which the leading edge of concentration band would migrate at a slower rate than the trailing edge as it flowing from the upstream to downstream column.Hence,the band broadening is counterbalanced,resulting in an enrichment effect for those minor components in separation process.Herein,two target substances,which showed similar peak position in high performance liquid chromatography(HPLC)and did not exceed 1.8%in crude paclitaxel were selected as target compounds for separation.By using the twin-column recycling chromatography with a step solvent gradient,a successful purification was achieved in getting the two with the purity almost 100%.We suggest this method is suitable for the separation of most components in natural produces,which shows higher precision and recovery rate compared with the common lab-operated separation ways for natural products(thin-layer chromatography and prep-HPLC).

π-Extended giant dimeric acceptor as a third component enables highly efficient ternary organic solar cells with efficiency over 19.2%

Ternary strategy with a suitable third component is a successful strategy to improve the photovoltaic performance of organic solar cells(OSCs).Very recently,Y-series based giant molecule acceptors or oligomerized acceptors have emerged as promising materials for achieving highly efficient and stable binary OSCs,while application as third component for ternary OSCs is limited.Here a novelπ-extended giant dimeric acceptor,GDF,is developed based on central Y series core fusion and rigid BDT as linker,and then incorporated into the state-of-the-art PM1:PC6 system to construct ternary OSCs.The GDF has a near planar backbone,resulting in increasedπ-conjugation,excellent crystallinity,and good electron transport capacity.When GDF is introduced into the PM1:PC6 system,it ensues in a cascade like the lowest unoccupied molecular orbitals(LUMO)energy level alignment,a complementary absorption band with PM1 and PC6,higher and balanced hole and electron mobility,slightly smaller domain size,and a higher exciton dissociation probability for PM1:PC6:GDF(1:1.1:0.1)blend film.As a consequence,the PM1:PC6:GDF(1:1.1:0.1)ternary OSC achieves a champion PCE of 19.22%,with a significantly higher open-circuit voltage and short-circuit current density,compared to 18.45%for the PM1:PC6(1:1.2)binary OSC.Our findings show that employing aπ-extended giant dimeric acceptor as a third component significantly improves the photovoltaic performance of ternary OSCs.

Meter-Scale Thin-Walled Structure with Lattice Infill for Fuel Tank Supporting Component of Satellite:Multiscale Design and Experimental Verification

Lightweight thin-walled structures with lattice infill are widely desired in satellite for their high stiffness-to-weight ratio and superior buckling strength resulting fromthe sandwich effect.Such structures can be fabricated bymetallic additive manufacturing technique,such as selective laser melting(SLM).However,the maximum dimensions of actual structures are usually in a sub-meter scale,which results in restrictions on their appliance in aerospace and other fields.In this work,a meter-scale thin-walled structure with lattice infill is designed for the fuel tank supporting component of the satellite by integrating a self-supporting lattice into the thickness optimization of the thin-wall.The designed structure is fabricated by SLM of AlSi10Mg and cold metal transfer welding technique.Quasi-static mechanical tests and vibration tests are both conducted to verify the mechanical strength of the designed large-scale lattice thin-walled structure.The experimental results indicate that themeter-scale thin-walled structure with lattice infill could meet the dimension and lightweight requirements of most spacecrafts.

The water-soluble TF3 component from Eupolyphaga sinensis Walker promotes tibial fracture healing in rats by promoting osteoblast proliferation and angiogenesis

Objective:To determine the active components of Eupolyphaga sinensis Walker(Tu Bie Chong)and explore the mechanisms underlying its fracture-healing ability.Methods: A modified Einhorn method was used to develop a rat tibial fracture model.Progression of bone healing was assessed using radiological methods.Safranin O/fast green and CD31 immunohistochemical staining were performed to evaluate the growth of bone cells and angiogenesis at the fracture site.Methylthiazoletetrazolium blue and wound healing assays were used to analyze cell viability and migration.The Transwell assay was used to explore the invasion capacity of the cells.Tubule formation assays were used to assess the angiogenesis capacity of human vascular endothelial cells(HUVECs).qRT-PCR was used to evaluate the changes in gene transcription levels.Results: Tu Bie Chong fraction 3(TF3)significantly shortened the fracture healing time in model rats.X-ray results showed that on day 14,fracture healing in the TF3 treatment group was significantly better than that in the control group(P=.0086).Tissue staining showed that cartilage growth and the number of H-shaped blood vessels at the fracture site of the TF3 treatment group were better than those of the control group.In vitro,TF3 significantly promoted the proliferation and wound healing of MC3T3-E1s and HUVECs(all P<.01).Transwell assays showed that TF3 promoted the migration of HUVECs,but inhibited the migration of MC3T3-E1 cells.Tubule formation experiments confirmed that TF3 markedly promoted the ability of vascular endothelial cells to form microtubules.Gene expression analysis revealed that TF3 significantly promoted the expression of VEGFA,SPOCD1,NGF,and NGFR in HUVECs.In MC3T3-E1 cells,the transcript levels of RUNX2 and COL2A1 were significantly elevated following TF3 treatment.Conclusion: TF3 promotes fracture healing by promoting bone regeneration associated with the RUNX2 pathway and angiogenesis associated with the VEGFA pathway.

Data Component:An Innovative Framework for Information Value Metrics in the Digital Economy

The increasing dependence on data highlights the need for a detailed understanding of its behavior,encompassing the challenges involved in processing and evaluating it.However,current research lacks a comprehensive structure for measuring the worth of data elements,hindering effective navigation of the changing digital environment.This paper aims to fill this research gap by introducing the innovative concept of“data components.”It proposes a graphtheoretic representation model that presents a clear mathematical definition and demonstrates the superiority of data components over traditional processing methods.Additionally,the paper introduces an information measurement model that provides a way to calculate the information entropy of data components and establish their increased informational value.The paper also assesses the value of information,suggesting a pricing mechanism based on its significance.In conclusion,this paper establishes a robust framework for understanding and quantifying the value of implicit information in data,laying the groundwork for future research and practical applications.

Transcriptomic analysis of Andrias davidianus meat and experimental validation for exploring its bioactive components as functional foods

Andrias davidianus(Chinese giant salamander,CGS)is the largest and oldest extant amphibian species in the world and is a source of prospective functional food in China.However,the progress of functional peptides mining was slow due to lack of reference genome and protein sequence data.In this study,we illustrated full-length transcriptome sequencing to interpret the proteome of CGS meat and obtain 10703 coding DNA sequences.By functional annotation and amino acid composition analysis,we have discovered various genes related to signal transduction,and 16 genes related to longevity.We have also found vast variety of functional peptides through protein coding sequence(CDS)analysis by comparing the data obtained with the functional peptide database.Val-Pro-Ile predicted by the CDS analysis was released from the CGS meat through enzymatic hydrolysis,suggesting that our approach is reliable.This study suggested that transcriptomic analysis can be used as a reference to guide polypeptide mining in CGS meat,thereby providing a powerful mining strategy for the bioresources with unknown genomic and proteomic sequences.

基于Visual Components的套筒类零件柔性制造单元的应用研究

为实现多品种中、小批量零件的智能化加工,以套筒类零件加工为研究对象,通过对零件工艺的分析,为满足单元加工、搬运、翻转等功能需求,对数控机床和工业机器人进行选型,实现柔性制造单元的设计。利用Visual Components软件进行单元搭建、仿真优化反馈以提高真实产线运行效率。利用Profinet实现制造单元真实搭建,完成单元安装调试。套筒类零件柔性制造单元的设计为生产线设计提供了新思路。

Umami taste components in chicken-spices blends and potential effect of aroma on umami taste intensity

In this study,umami taste intensity(UTI)and umami taste components in chicken breast(CB)and chickenspices blends were characterized using sensory and instrumental analysis.Our main objective was to assess the aroma-umami taste interactions in different food matrices and reconcile the aroma-taste perception to assist future product development.The impact of key aroma,including vegetable-note"2-pentylfuran",meaty"methional",green"hexanal",and spicy-note-estragole and caryophyllene"on UTI was evaluated in monosodium glutamate and chicken extract.We found that spices significantly decreased UTI and umami taste components in CB.Interestingly,the perceptually similar odorants and tastants exhibited the potential to enhance UTI in food matrices.Methional was able to increase the UTI,whereas spicy and green-note components could reduce the UTI significantly.This information would be valuable to food engineers and formulators in aroma selection to control the UTI perceived by consumers,thus,improving the quality and acceptability of the chicken products.