传递原理在稠油复合蒸汽驱方案优选中的应用

在分析稠油复合蒸汽驱驱油机理的基础上,利用油田实际数据,建立稠油蒸汽驱数学模型;应用传递原理,结合油藏数值模拟技术,计算相关传递指标,并将采油速度作为统一评价标准,对4种稠油蒸汽驱技术进行评价、筛选。结果表明:采油速度从高到低的驱动方式依次为蒸汽氮气泡沫连续驱、蒸汽氮气泡沫段塞驱、蒸汽氮气驱和纯蒸汽驱;驱动功率与采油速度之间具有较强的正相关性,说明应用传递原理进行稠油热驱技术方案的筛选是可行的。

传递研究的形成脉络与发展现状

传递研究针对不同形式的转换与同一形式的传递,旨在通过探讨传递过程的变化规律及其影响因素,从而达到对传递过程进行动态调节和控制的目的。从传递与能量传递共同构成能研究的完整体系、传递与不平衡势场密不可分、传递是分析在动态层面的必要补充、传递用于描述多场耦合驱替机理的有益扩展等角度,阐述了传递研究的形成脉络与发展现状,指出传递研究不应偏离工程应用的主要方向,并应在传递系数的内在机制及评价多场耦合传递过程的参数指标体系等方面进行更为深入的研究。

高压加热器传递分析

基于热力学第一、第二定律和非平衡热力学理论,从传递的观点出发,对高压加热器稳定运行工况下的换热过程进行了研究;推导出流动状态下的传递方程,得到局部传系数和平均传系数计算公式,并计算出加热器各段在运行时的传量,验证了凝结段为加热器换热的主要单元,还可对加热器传效果进行有效评价。

电磁流体中的传递和转换关系

审视了多组分黏性电磁流体(包含热传输、对流、电磁能传输、质量传输和化学反应过程)的动量传递方程、质量传递方程、能量传递方程,重新构建了电磁流体的熵传递方程。通过定义热、压、化学、动能、势能、电磁火用,重新构建了不同形式火用传递的分量方程及其总火用传递方程。通过分解这些传递方程,揭示了不同形式火用之间可逆与不可逆的传递和转换关系,为理解不可逆传递过程的机制、正确计算不可逆性的火用损及其改善电磁流体传递过程的性能和用能效率提供了有效的途径。

Synthesis and Luminescence Improvement of CaAlSiN_(3) Phosphors Doped with Eu^(2+) and Mn^(2+) for White LEDs

Eu^(2+) and Mn^(2+) co-activated CaAlSiN_(3) red phosphors were produced using the solid-state reaction tech⁃nique in a N2 environment.Excitation spectra,emission spectra,and diffuse reflection spectra were used to study the luminescence characteristics,energy gap,and thermal stability in detail.CaAlSiN_(3)∶Eu^(2+) exhibits an extended emission band when stimulated with 450 nm blue light,which is caused by the 4f65d to 4f7 transition of Eu^(2+).Similar⁃ly,CaAlSiN_(3)∶Mn^(2+) displays a wide emission band centered at 628 nm,which results from Mn^(2+)’s transition from 4T1(4G) to 6A1(6S).When the ions of Mn^(2+)were combined into CaAlSiN_(3)∶Eu^(2+),the photoluminescence intensity of Eu^(2+ )was greatly boosted because there was energy transfer and co-emission between Mn^(2+) and Eu^(2+).Beyond that,CaAlSiN_(3)∶Eu^(2+),Mn^(2+) emerges with splendid thermostability and high quantum efficiency,the quenching temperature surpasses 300℃,and the internal quantum efficiency is determined to be around 84.9%.The white LED was pack⁃aged with a combination of CaAlSiN_(3)∶Eu^(2+),Mn^(2+),LuAG∶Ce3+ and a blue chip.At a warm white-light corresponding color temperature(3009 K) with CIE coordinates(0.4223,0.3748),the color rendering index Ra has reached 93.2.CaAlSiN_(3)∶Eu^(2+),Mn^(2+) would have great application potential as a red-emitting phosphor for white LEDs.

Vertical distribution characteristics of soil saturated hydraulic conductivity under different land use patterns in the Mu Us sandy land

Background,aim,and scope Soil saturated hydraulic conductivity(K_(s))is a key parameter in the hydrological cycle of soil;however,we have very limited understanding of K_(s) characteristics and the factors that inf luence this key parameter in the Mu Us sandy land(MUSL).Quantifying the impact of changes in land use in the Mu Us sandy land on K_(s) will provide a key foundation for understanding the regional water cycle,but will also provide a scientific basis for the governance of the MUSL.Materials and methods In this study,we determined K_(s) and the basic physical and chemical properties of soil(i.e.,organic matter,bulk density,and soil particle composition)within the first 100 cm layer of four different land use patterns(farmland,tree,shrub,and grassland)in the MUSL.The vertical variation of K_(s) and the factors that influence this key parameter were analyzed and a transfer function for estimating K_(s) was established based on a multiple stepwise regression model.Results The K_(s) of farmland,tree,and shrub increased gradually with soil depth while that of grassland remained unchanged.The K_(s) of the four patterns of land use were moderately variable;mean K_(s)values were ranked as follows:grassland(1.38 mm·min^(-1))<tree(1.76 mm·min^(-1))<farmland(1.82 mm·min^(-1))<shrub(3.30 mm·min^(-1)).The correlation between K_(s) and organic matter,bulk density,and soil particle composition,varied across different land use patterns.A multiple stepwise regression model showed that silt,coarse sand,bulk density,and organic matter,were key predictive factors for the K_(s) of farmland,tree,shrub,and grassland,in the MUSL.Discussion The vertical distribution trend for K_(s) in farmland is known to be predominantly influenced by cultivation,fertilization,and other factors.The general aim is to improve the water-holding capacity of shallow soil on farmland(0-30 cm in depth)to conserve water and nutrients;research has shown that the K_(s) of farmland increases with soil depth.The root growth of tree and shrub in sandy land exerts mechanical force on the soil due to biophysical processes involving rhizospheres,thus leading to a significant change in K_(s).We found that shallow high-density fine roots increased the volume of soil pores and eliminated large pores,thus resulting in a reduction in shallow K_(s).Therefore,the K_(s) of tree and shrub increased with soil depth.Analysis also showed that the K_(s) of grassland did not change significantly and exhibited the lowest mean value when compared to other land use patterns.This finding was predominantly due to the shallow root system of grasslands and because this land use pattern is not subject to human activities such as cultivation and fertilization;consequently,there was no significant change in K_(s) with depth;grassland also had the lowest mean K_(s).We also established a transfer function for K_(s) for different land use patterns in the MUSL.However,the predictive factors for K_(s) in different land use patterns are known to be affected by soil cultivation methods,vegetation restoration modes,the distribution of soil moisture,and other factors,thus resulting in key differences.Therefore,when using the transfer function to predict K_(s) in other areas,it will be necessary to perform parameter calibration and further verification.Conclusions In the MUSL,the K_(s) of farmland,tree,and shrub gradually increased with soil depth;however,the K_(s) of grassland showed no significant variation in terms of vertical distribution.The mean K_(s) values of different land use patterns were ranked as follows:shrub>farmland>tree>grassland;all land use patterns showed moderate levels of variability.The K_(s) for different land use patterns exhibited differing degrees of correlation with soil physical and chemical properties;of these,clay,silt,sand,bulk density,and organic matter,were identified as important variables for predicting K_(s) in farmland,tree,shrub,and grassland,respectively.Recommendations and perspectives In this study,we used a stepwise multiple regression model to establish a transfer function prediction model for K_(s) for different land use patterns;this model possessed high estimation accuracy.The ability to predict K_(s) in the MUSL is very important in terms of the conservation of water and nutrients.

导热过程不同优化目标的优化准则

对于不同目的导热过程存在不同的优化目标。基于传递方程和火积传递方程,分别导出了以降低作功能力耗散为目标的导热过程优化准则和以降低传热能力耗散为目标的导热过程优化准则。以降低作功能力耗散为目标的导热过程优化准则表明,在总导热能力一定的条件下,相对温度梯度分布均匀导热最优;以降低传热能力耗散为目标的导热过程优化准则表明,在总导热能力一定的条件下,温度梯度分布均匀导热最优。

Enhancement of Photophosphorylation and Photosynthesis in Rice by Low Concentrations of NaHSO_3 Under Field Conditions

Spraying 1-2 mmol/L solution of NaHSO 3 on rice ( Oryza sativa L.) leaves resulted in the enhancement of net photosynthetic rate for more than three days. It was also observed that NaHSO 3 application caused increases both in ATP content in leaves and the millisecond_delayed light emission of leaves. The increase in net photosynthetic rate caused by NaHSO 3 treatment was similar to that by PMS (phenazine methosulfate) treatment. The grain yield of treated rice was enhanced approximately by 10% after duplicated application of NaHSO 3 in milk_ripening stage. It is suggested that the enhancement of photosynthesis by NaHSO 3 treatment resulted from the effect of increasing ATP supplement. Concomitant with an increase in the photosynthetic rate and ATP content in leaves, the transient increase in chlorophyll fluorescence after the termination of actinic light, which could be used as an index of the cyclic electron flow, was also enhanced by low concentration of NaHSO 3 treatment. Basing on these results it is proposed that the increase in rice photosynthesis caused by low concentrations of NaHSO 3 could be due to the stimulation of the cyclic electron flow around PSⅠ which in turn the enhancement of the coupled photophosphorylation and photosynthesis.

Bayesian network model for traffic flow estimation using prior link flows

In order to estimate traffic flow a Bayesian network BN model using prior link flows is proposed.This model sets link flows as parents of the origin-destination OD flows. Under normal distribution assumptions the model considers the level of total traffic flow the variability of link flows and the violation of the conservation law.Using prior link flows the prior distribution of all the variables is determined. By updating some observed link flows the posterior distribution is given.The variances of the posterior distribution normally decrease with the progressive update of the link flows. Based on the posterior distribution point estimations and the corresponding probability intervals are provided. To remove inconsistencies in OD matrices estimation and traffic assignment a combined BN and stochastic user equilibrium model is proposed in which the equilibrium solution is obtained through iterations.Results of the numerical example demonstrate the efficiency of the proposed BN model and the combined method.

FLIGHT CLASSIFICATION MODEL BASED ON TRANSITIVE CLOSURE ALGORITHM AND APPLICATION TO FLIGHT SEQUENCING PROBLEM

A new arrival and departure flight classification method based on the transitive closure algorithm （TCA） is proposed. Firstly, the fuzzy set theory and the transitive closure algorithm are introduced. Then four different factors are selected to establish the flight classification model and a method is given to calculate the delay cost for each class. Finally, the proposed method is implemented in the sequencing problems of flights in a terminal area, and results are compared with that of the traditional classification method（TCM）. Results show that the new classification model is effective in reducing the expenses of flight delays, thus optimizing the sequences of arrival and departure flights, and improving the efficiency of air traffic control.

Estimation of the Forces on Rubbing Rotor-Bearing System

It*ss very important to identify the load on rotor bearing system. Based on load identification in time domain, a new method combined with transfer matrix method is applied in rubbing rotor bearing system to estimate the force on rubbing rotor for the first time. Avoiding calculating the modal parameters, the outside excitation force on multi point and the distribute of internal forces on rubbing rotor bearing system can be identified by this way at the same time. Finally, the simulation is made on partial lateral rubbing rotor bearing system. For the faulty of rotor/stator rub, the point where rubbing occurs and the change of impact forces can be detected by this method in order to improve the accuracy of rotor/stator rub faulty diagnosis.

Numerical simulation of concrete shrinkage based on heat and moisture transfer in porous medium

To simulate the concrete shrinkage in varying temperature and moisture environments, a simulate procedure comprising an analytical process and a finite element analysis is proposed based on the coupled partial differential equations describing heat and moisture transfer in a porous medium. Using the Laplace transformation method and transfer function to simplify and solve the coupled equations in Laplace domain, the moisture and temperature distribution in time domain are obtained by inverse Laplace transformation. The shrinkage deformations of concrete are numerically simulated by the finite element method （FEM） based on the obtained temperature and moisture distribution. This approach avoids the complex eigenvalues, coupling difficulty and low accuracy found in other solving methods, and also effectively calculates the moisture induced shrinkage which is almost impossible using familiar FEM software. The validity of the simulation procedure is verified by Hundt＇s test data. The results reveal that the proposed approach can be considered a reliable and efficient method to simulate the coupling moisture and temperature shrinkage of concrete.

Electrochemistry of ABTS at Glassy Carbon Electrodes

The electrochemical and the mass transport behavior of ABTS2-/ABTS＇- （2,2＇-azinobis（3- ethylbenzothiazoline-6-sulfonate）） redox couple at glassy carbon electrode （GCE） in phos- phate buffer solution （PBS, pH=4.4） is studied in detail by cyclic voltammetry combined with rotating disk electrode system. From the i-E curves recorded at different electrode rotating rate, rate constant, and transfer coefficient for ABTS 2-←→ABTS^-＋e reaction at GCE electrode and the diffusion coefficient of ABTS2- in PBS are estimated to be 4.6× 10^-3 cm/s, 0.28, and 4.4× 10^-6 cm^2/s, respectively. The transfer coefficient with a value of ca. 0.28 differs largely from the value of 0.5 that is always assumed in the literature. The origins for the difference of the rate constant determined and the challenges for estimating the stan- dard rate constant are discussed. The performance for such ABTS2- mediated bio-cathode toward oxygen reduction reaction is discussed according to the over-potential drop as well as current output limit associated with the charge transfer kinetics of ABTS2- ←→ABTS-＋e redox reaction and/or the mass transport effect.

The Logical Properties of Filters of Lattice Implication Algebra

In this paper, we discuss some propertie s of lattice implication algebra and difine the transitivity of implication in a set, we show the transitivity of implication and the substitution Theorem hold i n filters. So every filter of lattice implication algebra satisfies the Syllogis m and substitution Theorem of propositional logic.

Inheritance and Sequence Homology Analysis of the Maize DNA Introgressed into the Wheat Doubled Haploid Plant Through Wheat×Maize Cross

A maize (Zea mays L.) genome_specific repeated DNA sequence (clone MR64) has been transferred into one DH line of wheat through wheat (Triticum persicum Vav. ex Zhuk.) and maize cross. In the present study by RFLP analysis the authors proved that this DNA sequence could stably transmit into DH3 plants, the next generation derived from DH2 self_crossing. A similarity search in all DNA databases using BLASTN program showed that the DNA sequence of MR64 had as high as 93% identity to PREM_2 and 79% to Opie_2 in nucleotides. Both PREM_2 and Opie_2 are known as retrotransposons in maize genome, suggesting that MR64 likely is the partial sequence of a maize retrotransposon. Therefore, the results indicate that some retrotransposon might involve the DNA introgression from maize to wheat genome through wide fertilization. Stable inheritance of this maize genome_specific retrotransposon_like DNA in the wheat genome opens up the possibility of using retrotransposon as a new tool for gene tagging, function analysis, and insertional mutagenesis in wheat genome.

Reference information time delay estimation and compensation in transfer alignment

To reduce the error in transfer alignment caused by reference information delay,a time delay estimation method is developed based on least-squares curve fitting of the angular rate integration.First,the gyro sensor measurements of the main strapdown inertial navigation system（M-SINS） and the slave strapdown inertial navigation system（S-SINS） are recorded for a few seconds and the integration of the data is calculated.Then,the possible maximum range of the delay value is defined and the points of the curve at different intervals are moved.The square of the differences between the corresponding points are calculated.Finally,the delay estimation can be acquired by the least-squares curve fitting of the M-SINS and the S-SINS.A delay compensation method by local data shifting is also presented.The simulation results demonstrate the effectiveness of delay estimation and indicate that the estimation accuracy is independent of the delay value.And the local data shifting compensation method can effectively reduce the errors of the transfer alignment caused by the reference information delay.

FREE VIBRATION ANALYSIS AND PHYSICAL PARAMETER IDENTIFICATION OF NON-UNIFORM BEAM CARRYING SPRING-MASS SYSTEMS

To analyze a multibody system composed of non-uniform beam and spring-mass subsystems, the model discretization is carried on by utilizing the finite element method（FEM）, the dynamic model of non-uniform beam is developed by using the transfer matrix method of multibody system（MS-TMM）, the transfer matrix of non-u- niform beam is derived, and the natural frequencies are computed. Compared with the numerical assembly method （NAM）, the results by MS-TMM have good agreement with the results by FEM, and are better than the results by NAM. When using the high precision method, the global dynamic equations of the complex multibody system are not needed and the orders of involved system matrices are decreased greatly. For the investigation on the re- verse problem of the physical parameter identification of multibody system, MS-TMM and the optimization tech- nology based on genetic algorithms（GAs） are combined and extended. The identification problem is exchanged for an optimization problem, and it is formulated as a global minimum solution of the objective function with respect to natural frequencies of multibody system. At last, the numerical example of non-uniform beam with attach- ments is discussed, and the identification results indicate the feasibility and the effectivity of the proposed aop- proach.

Modal macro-strain identification from operational macro-strain shape under changing loading conditions

To develop modal macro-strain （ MMS ） identification techniques and improve their applicability in a continuous health monitoring system for civil infrastructures, the concept of operational macro-strain shape （OMSS） and the corresponding identification method are proposed under unknown ever-changing loading conditions, and the MMS is then obtained. The core of the proposed technique is mainly based on the specific property that the macro-strain transmissibility tends to be independent of external excitations at the poles of the system and converges to a unique value. The proposed method is verified using the experimental data from a three-span continuous beam excited by an impact hammer at different locations. The identified results are also compared with the commonly used methods, such as the peak- picking （PP） method, the stochastic subspace identification （SSI） method, and numerical results, in the case of unknown input forces. Results show that the proposed technique has unique merits in accuracy and robustness due to its combining multiple tests under changing loading conditions, which also reveal the promising application of the distributed strain sensing system in identifying MMS of operational structures, as well as in the structural health monitoring （SHM） field.

Effects of Membrane Lipids on the Electron Transfer Activity of Cytochrome b_6f Complex from Spinach

A lipid_depleted cytochrome b 6f (Cyt b 6f) preparation was obtained from spinach (Spinacia oleracea L.) chloroplasts. Upon reconstitution of this preparation with the membrane lipids purified from spinach thylakoid, the effects of different membrane lipids on the electron transfer activity were studied. The results show that the electron transfer activity of Cyt b 6f is obviously stimulated to different extents, respectively, by monogalactosyldiacylglycerol (MGDG), digalactosyldiacylglycerol (DGDG), phosphatidylcholine (PC), phosphatidylglycerol (PG) and sulfoquinovosyldiacylglycerol (SQDG), and that the extents of stimulation may be closely related to the charge of the membrane lipids. The stimulation of non_charged lipids (MGDG, DGDG) and neutrally_charged lipid (PC) was high with a maximum enhancement of 89%, 75% and 77%, respectively; but the stimulation of two kinds of negatively_charged lipid (PG and SQDG) was relatively low with a maximum enhancement of 43% and 26%, respectively.

ISOLATION DESIGN AND SIMULATIONAL EXPERIMENT OF NANOMETER MICRO MOVEMENT TEST-BED

The relation of mass, stiffness and rate of damping is obtained by using the mechanical analysis of the obstructive vibration system of two dimensions for the design of the obstructive vibration system of more freedom and the micro vibration test bed. The result of stimulational experiment indicates that the isolation of vibration of this system is satisfactory. The design method of vibration can be used as the reference to ultra precision machine tool, super micro orientation machanism and so on.