CYW-KH口腔力智能测量仪的研制和应用

本仪器在前人研制的基础上进行了较大改进,采用了更符合牙齿排列特点的剪力式传感器,在(牙合)力测量、计算部分采用了微电脑控制模式,测量灵敏度及精确度高;显示部分采用LED显示器直接数码显示,结果直观、清晰,可动态观察瞬时(牙合)力,另外配有外接插口可按打印机即时打印并可与计算机接口进行数据处理.本文以该仪器测量了正常青年男女各100名的(牙合)力并进行了统计分析。

Data processing method for aerial testing of rotating accelerometer gravity gradiometer

A novel method for noise removal from the rotating accelerometer gravity gradiometer(MAGG)is presented.It introduces a head-to-tail data expansion technique based on the zero-phase filtering principle.A scheme for determining band-pass filter parameters based on signal-to-noise ratio gain,smoothness index,and cross-correlation coefficient is designed using the Chebyshev optimal consistent approximation theory.Additionally,a wavelet denoising evaluation function is constructed,with the dmey wavelet basis function identified as most effective for processing gravity gradient data.The results of hard-in-the-loop simulation and prototype experiments show that the proposed processing method has shown a 14%improvement in the measurement variance of gravity gradient signals,and the measurement accuracy has reached within 4E,compared to other commonly used methods,which verifies that the proposed method effectively removes noise from the gradient signals,improved gravity gradiometry accuracy,and has certain technical insights for high-precision airborne gravity gradiometry.

Frequency characteristics and far-field effect of gravity perturbation before earthquake

We used high-pass filtering and the Fourier transform to analyze tidal gravity data prior to five earthquakes from four superconducting gravity stations around the world. A stable gravitational perturbation signal is received within a few days before the earthquakes. The gravitational perturbation signal before the Wenchuan earthquake on May 12, 2008 has main frequency of 0.1–0.3 Hz, and the other four have frequency bands of 0.12-0.17 Hz and 0.06-0.085 Hz. For earthquakes in continental and oceanic plate fault zones, gravity anomalies often appear on the superconducting gravimeters away from the epicenter, whereas the stations near the epicenter record small or no anomalies. The results suggest that this kind of gravitational perturbation signals correlate with earthquake occurrence, making them potentially useful earthquake predictors. The far-field effect of the gravitational perturbation signals may reveal the interaction mechanisms of the Earth’s tectonic plates. However, owing to the uneven distribution of gravity tide stations, the results need to be further confirmed in the future.

Cascade Kalman filter for gravity anomaly distortion correction based on second order potential model

Using a gravity anomaly covariance function based on the second-order Ganssian Markov gravity anomaly potential model, the state equation of a gravity anomaly signal is obtained in marine gravimetry. Combined with the system state equation and the measurement equation, a new method of the cascade Kalman filter is proposed and applied to the correction of gravity anomaly distortion. In the signal processing procedure, an inverse Kalman filter is used to restore the gravity anomaly signal and high frequency noises first. Then an adaptive Kalman filter, which uses the gravity anomaly state equation as the system equation, is set to estimate the actual gravity anomaly data. Emulations and experiments indicate that both the cascade Kalman filter method and the single inverse Kalman filter method are effective in alleviating the distortion of the gravity anomaly signal, but the performance of the cascade Kalman filter method is better than that of the single inverse Kalman filter method.

Novel gravity passive navigation system

According to the characteristics of gravity passive navigation, this paper presents a novel gravity passive navigation system （GPNS）, which consists of the rate azimuth platform （RAP）, gravity sensor, digitally stored gravity maps, depth sensor and relative log. The algorithm of rate azimuth platform inertial navigation system, error state-space equations, measurement equations and GPNS optimal filter are described. In view of the measurements made by an onboard gravity sensor the Eotvos effect is introduced in the gravity measurement equation of a GPNS optimal filter. A GPNS is studied with the Matlab/Simulink tools; simulation results demonstrate that a GPNS has small errors in platform attitude and position. Because the inertial navigation platform is the rate azimuth platform in the GPNS and gravity sensor is mounted on the rate azimuth platform, the cost of the GPNS is lower than existing GPNS＇s and according to the above results the GPNS meets the need to maintain accuracy navigation for underwater vehicles over long intervals.

Study on rate azimuth platform inertial navigation system

The cost of the gravity passive inertial navigation system will be lower witha rate azimuth platform and gravity sensor constituting a gravity measurement and navigationsystem. According to the system performance characteristics, we study the rate azimuth platforminertial navigation system (RAPINS), give the system navigation algorithm, error equations of theattitude, velocity and position of the rate azimuth platform, and random error models of theaccelerometer and gyro. Using the MATLAB/Simulink tools, we study the RAPINS and RAPINS withvelocity damping. Simulation results demonstrate that the RAPINS with velocity damping has smallerrors in platform attitude and position and satisfies gravity measurement and navigationrequirement.

Research on the Testing Methods of Instrumental System in the Marine Magnetic Survey

Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.

Force measurement between mica surfaces in electrolyte solutions

The forces between two molecularly smooth mica surfaces are measured in monovalent and divalent cations electrolyte solutions by a surface force apparatus （SFA）. The properties of K＋, Na＋, and Mg2＋ between molecularly smooth mica surfaces are investigated. The Derjagui-Landau- Verwey-Overbeek （DLVO） force and the hydration force are detected in the experiment. The results show that in lower concentrations of a monovalent electrolyte solution （about 10-4 mol/L）, the force curves are completely in good agreement with those computed by the DLVO theory. However, additional short-range repulsive forces which deviate from the DLVO theory are observed when the concentrations of cations are above the critical bulk concentration, which is different for each electrolyte. The results show the properties of these cations on both the screening effect adsorbed on the mica surface and the hydration in solution. From the results, the interaction energy between two hydrated ions of potassium or sodium can also be estimated.

MATHEMATICAL MODEL OF ~4He QUANTUM INTERFEROMETER GYROSCOPE

The mathematical model of 4He quantum interferometer gyroscope is presented. The model includes the driven equation, the current equation and the position equation. Therefore, it can sufficiently describe the gyro- scope system. The driven equation shows the thermally driven gyroscope can work for a long time but the pres- sure driven one cannot. From the current equation, the superfluid currents passing through the weak link contain the AC currents which show the rotation flux, and other currents caused by drive. As shown in the position equa- tion, the displacement of diaphragm is the only detectable parameter in the gyroscope system. The model is tested by the simulations based on experimental parameters, and can be used to research performance of the gyroscope and analyse the gyroscope error.

Pressure-induced strongadhesion between chitosan nanofilms

The surface and adhesion forces between chitosan- coated mica surfaces in an acetic acid buffer solution were measured using a surface force apparatus （SFA）. The force- distance profiles were obtained under different pressure conditions. It was found that the chitosan was adsorbed on the mica surface and formed a stable nanofilm under acid conditions. The adsorbed chitosan nanofilms induced a short- range monotonically steric force when two such surfaces came close in the acid buffer. The adhesion forces between the two chitosan-coated mica surfaces varied with the loads. Strong adhesion between the two chitosan-coated mica surfaces was observed at high pressure. Such pressure-dependent adhesion properties are most likely related to the molecular configurations and hydrogen bonds reordering under high confinement.

Adsorption and desorption behaviors of ssDNA molecules on mica surface by surface forces apparatus

An approach for studying the adsorption and desorption behaviors of single-stranded DNA（ ssDNA） molecules on the mica surface by the surface forces apparatus（ SFA） is reported,which can be used to characterize the precise thickness,configuration and mechanical properties of ssDNA layers on the mica surface at a certain buffer solution. The formation of ss DNA layers is first studied by tuning the ssDNA concentrations, and the experimental results indicate that the ss DNA concentration of 100 ng / μL is ideal for forming a ssDNA monolayer structure on the mica surface, and the hardwall value measured to be 1.04 nm under this circumstance is regarded as the thickness of the ssDNA monolayer confined on mica. The desorption behavior of ssDNA molecules from the mica surface is further studied by observing and comparing different shapes of the force-distance curves under certain conditions. It is found that the desorption of ss DNA molecules from the mica surface occurs as the monovalent salts are added into the gap buffer. It is inferred that the competition effect between monovalent and divalent salts can induce the release of ssDNA from substrate.The results also reveal that 10 mmol / L monovalent salts（ Na~＋）is sufficient for the desorption of ssDNA from mica. This work provides an applicable method to study the binding mechanism of ss DNA molecules on inorganic substrates.

Deterioration mechanism and rapid detection of performances of an existing subgrade in southern China

To relieve the increasing traffic load, many early built highways need to be widened or reconstructed. The rapid performance detection to existing subgrades is important to their reasonable evaluation and maximized utilization. Based on five kinds of soils taken from an existing highway in southern China, three commonly detecting methods were used to determine their moisture contents, compaction degrees and resilient moduli. The results showed that the measured moisture contents were greater than the design value, and the compaction degrees decreased sharply compared to the original ones. The moisture and heat exchange produced a decrease in the resilient modulus of plate loading test(PLT) from the standard 60 MPa down to 40 MPa. Afterwards, the portable falling weight deflectometer(PFWD) and dynamic cone penetrometer(DCP) were used to evaluate the subgrade performances. The measured PFWD moduli and the DCP penetration rates were correlated with the resilient moduli of PLT, deflections of the Beckman beam test, compaction degrees and moisture contents. The correlation analysis indicates that both of two methods are suitable in rapid detecting subgrade performances, but PFWD method is more recommended for it has higher accuracy and efficiency.

Design and implementation of square Helmholtz coil for uniform magnetic field generation

In order to calibrate electrical instruments and generate a constant magnetic field, a novel design method for square Helmholtz coil is proposed. According to the superposition principle in electromagnetics, the theory of the square Helmholtz coil is established, and the design method is verified by Matlab calculation. Compared with conventional circular Helmholtz coil, the novel square one is with a larger uniform region. Simulation work is conducted in Maxwell, and the distribution of the magnetic field is obtained. The results demonstrate the validation of the applied calculation method of the proposed Helmholtz model. The space utilization rate η is used to make a comparison between the square and circular coils for the uniform region. The square Helmholtz coil is fabricated, the length of a single square coil is 1.5 m, and the amplitude of the magnetic field is controlled by the current. The GSM-19 T proton magnetometer is used to measure the amplitude of the magnetic field generated by the square Helmholtz coil. Experimental results indicate that a wide-range variable uniform magnetic field from 0 to 120 μT is generated in the center of Helmholtz coils.

Effects of ion-ion correlations on surface charge inversion in mixture electrolyte solutions

As the structure of electrical double layer(EDL)is crucial for the transport properties of ions in micro/nanochannels,to demonstrate the effects of the ion-ion correlations on EDL structures in mixture electrolyte solutions,the interaction forces between two mica surfaces immersed in different volume fractions of LaCl3/KCl and LaCl3/MgCl2 mixture solutions with a total ionic strength of 10^-4 mol/L were measured using a surface forces apparatus(SFA).The results reveal that the surface charge of mica surfaces can be inversed at a critical concentration of La^3+ions in electrolyte solutions,due to the correlations between La^3+ions.The addition of monovalent has negligible effects on ion-ion correlations,while the charge inversion was slightly suppressed by introducing the divalent ions.The mechanism of charge inversion in mixture electrolyte solutions was analyzed based on the strongly correlated liquid(SCL)theory.These findings provide implications for understanding the effects of ion-ion correlations on EDL structures,surface charge properties,and ion transportation.

Comparison of retrieving methods of ocean wave periods from satellite altimeter with buoy measurements

For validating the results of retrieved mean wave period, four empirical algorithms established previously are introduced. Based on the data of over five years derived from TOPEX satellite altimeter for the entire East China Sea, ocean wave periods were calculated and statistical comparison among them was performed. The retrieved mean wave period 〈T〉 obtained with our new distribution parameters showed better agreement with the wave period TB measured by buoy than that calculated by other three algorithms. The difference between the mean values of 〈T〉 and that of TB is 0.16 s and the RMSE （root mean square error） of 〈T〉 is the lowest value （0.48）.

A new apparatus for investigating stress,deformation and seepage coupling properties of rock fractures

A true triaxial apparatus which is composed of three units was presented.The apparatus allows for investigations on deformation and seepage behaviors of a single rock fracture subjected to lateral stress and normal stress.The first unit has three jacks which can apply loads independently in three orthogonal directions.The second unit is used to supply water inflow,control seepage pressure and measure flow velocity in real time.The third unit is for measuring the normal deformation of rock fractures.Some tests for investigating the normal deformation and seepage behaviors of rock fractures subjected to normal and lateral loads on hard granite specimens with an artificial persistent fracture,were introduced.The results show that both the normal deformation and the hydraulic conductivity are influenced not only by the normal stress but also by the lateral stress.It is also shown that the aperture and the hydraulic conductivity decrease with the increasing normal stress but increase with the increasing lateral stress and both the aperture and the hydraulic conductivity obey exponential relationships with the normal stress and the lateral stress.

Analysis on monthly-averaged distribution of sea surface wind and wave over the seas southeast of Asia using ERS-2 scatterometer data

variation. In the area of 2 The wind system over the seas southeast of Asia （SSEA） plays an important role in China＇s climate this paper, ERS scatterometer winds covering the period from January 2000 to December 2000 and 41°N, 105 130°E were analyzed with a distance-weighting interpolation method and the monthly mean distribution of the sea surface wind speed were given, The seasonal characteristics of winds in the SSEA were analyzed. Based on WAVEWATCH Ⅲ model, distribution of significant wave height was calculated.

Stress test and analysis based on SMS fiber structure with high sensitivity

Single mode-multimode-single mode （SMS） sensor is widely used for parameters measurement, such as bending, dis-placement, temperature, strain, refractive index, etc. Generally, SMS sensor has advantages of simple structure, low cost and easy layout, therefore it has become a research hotspot in recent years. In this paper, the multimode fiber with large core is used for manufacturing SMS structure with high sensitivity. Firstly, the multimode fiber with core/cladding diameters of 105/ 125 jitm has access to the system by means of single mode optical fiber. Secondly, SMS device structure is manufactured by welding the eccentric shaft of multimode optical fiber. Afterwards, mode interference effect and spectral response characteristics of the structure of single mode-multimode-single mode optical fiber are analyzed theoretically. Finally, with the help of a wide spectrum light source and a spectrum analyzer, the transmission spectra characteristics of SMS optical fiber with strain is tested. By observing the curve that the wave changes with stress, the sensitivity is calculated and it is consistent with theoretical value .

Cross-Coupling Correction for LaCoste ＆ Romberg Airborne Gravimeter

Abstract The cross-coupling corrections for the LaCoste ＆ Romberg airborne gravimeter are computed as a linear combination of 5 so-called cross-coupling monitors. The weight factors （coefficients） determined from marine gravity data by the factory are obviously not optimal for airborne application. These coefficients are recalibrated by minimizing the difference between airborne data and upward continued surface data （external calibration） and by minimizing the errors at line crossings （internal calibration） respectively. An integrating method to recalibrate the above-mentioned coefficients and the beam scale factor simultaneously is also presented. Experimental results show that the systemic errors in the airborne gravity anomalies can be greatly reduced by using any of the recalibrated coefficients. For example, the systemic error is reduced from 4.8 mGal to 1.8 mGal in Datong test.

Validity and reliability of three methods of stiffness assessment

Background：Stiffness is commonly assessed in relation to injury and athletic performance.The purpose of this research was to compare the validity and reliability of 3 in vivo methods of stiffness assessment using 1 cohort of participants.Methods：To determine inter-day reliability,15 female netballers were assessed for stiffness twice within 1 week using unilateral hopping（vertical stiffness）,free oscillations of the calf,and myometry of various muscles of the triceps surae.To establish convergent construct validity,stiffness was compared to static and dynamic strength measurements.Results：Test–retest stiffness results revealed that vertical stiffness produced moderate to high reliability results and myometry presented moderate to very high reliability.In contrast,the free oscillation technique displayed low to moderate reliability.Vertical stiffness demonstrated a significa t correlation with rate of force development during a squat jump,whilst myometer stiffness measurements from 3 sites in the lower limb revealed significan correlations with isometric rate of force development.Further,significan negative correlations were evident between the eccentric utilisation ratio and various myometer stiffness results.No relationships were established between the free oscillation technique and any of the performance measurements.Conclusion：These results suggest that vertical stiffness and myometry are valid and reliable methods for assessing stiffness.