A flexible flat torque converter was proposed to fulfill the requirement of miniaturization and power density maximization for automobiles.Constructed by two arcs joined by lines,the torus was designed directly from d...A flexible flat torque converter was proposed to fulfill the requirement of miniaturization and power density maximization for automobiles.Constructed by two arcs joined by lines,the torus was designed directly from design path.The influence of flatness on the performance of the torque converter was evaluated.The software CFX and standard k-ε model were adopted to simulate the internal flow fields of the torque converter under different flatness ratios.The results indicated that the performance of the torque converter got worse as the flatness declined,but the capacity of pump increased.The efficiency and the torque ratio dropped slightly as the flatness ratio decreased.So the torque converter could be squashed appropriately to get high power density without too much efficiency sacrifice.But when the flatness ratio was below 0.2,there was a significant drop in the efficiency.展开更多
A flexible calibration method based on a front-coated flat mirror is proposed for a laser light-sectioning three-dimensional(3D)measurement system. Since the calibration target and its mirror image are spatially separ...A flexible calibration method based on a front-coated flat mirror is proposed for a laser light-sectioning three-dimensional(3D)measurement system. Since the calibration target and its mirror image are spatially separated and can be recorded in an image by a camera,the proposed method requires only a single composite image that contains a non-planar checkerboard pattern,a laser strip projected on the target and their mirror images to complete the calibration of the camera and the laser plane in one step. Levenberg-Marquardt(LM)algorithm is used to optimize the system parameters,and the measurement accuracy and speed are improved to enable online 3D inspection. Static and dynamic online 3D measurements are carried out on a cup and a triple stepped shaft,respectively,to validate the proposed method. The shaft has two steps with the depth of(0.5±0.01)mm and(2±0.01)mm to be measured online when the shaft is rotated and translated at the same time. The measurement results can be output at a frequency of 7 to 11 readings per second with standard deviations of 0.040 mm and 0.051 mm. The experimental results verify the effectiveness and flexibility of the proposed method.展开更多
We consider a highly unconventional superconducting state with chiral d-wave symmetry in doped graphene under strain with the Gutzwiller–RVB method in the momentum space. It is shown that flat bands emerge in the nor...We consider a highly unconventional superconducting state with chiral d-wave symmetry in doped graphene under strain with the Gutzwiller–RVB method in the momentum space. It is shown that flat bands emerge in the normal state for reasonable strain. As a result, the superconducting critical temperature is found to be linearly proportional to the strength of the electron–electron interaction. Furthermore, the chiral d-wave superconducting state is shown with coexistence of the charge density wave and the pair density wave. There are different coexisting states with those orders under different doping levels.展开更多
基金Supported by the National Natural Science Foundation of China (50905016)
文摘A flexible flat torque converter was proposed to fulfill the requirement of miniaturization and power density maximization for automobiles.Constructed by two arcs joined by lines,the torus was designed directly from design path.The influence of flatness on the performance of the torque converter was evaluated.The software CFX and standard k-ε model were adopted to simulate the internal flow fields of the torque converter under different flatness ratios.The results indicated that the performance of the torque converter got worse as the flatness declined,but the capacity of pump increased.The efficiency and the torque ratio dropped slightly as the flatness ratio decreased.So the torque converter could be squashed appropriately to get high power density without too much efficiency sacrifice.But when the flatness ratio was below 0.2,there was a significant drop in the efficiency.
基金supported in part by the National Natural Science Foundation of China (No. 11802132)the Natural Science Foundation of Jiangsu Province(No.BK20180446)。
文摘A flexible calibration method based on a front-coated flat mirror is proposed for a laser light-sectioning three-dimensional(3D)measurement system. Since the calibration target and its mirror image are spatially separated and can be recorded in an image by a camera,the proposed method requires only a single composite image that contains a non-planar checkerboard pattern,a laser strip projected on the target and their mirror images to complete the calibration of the camera and the laser plane in one step. Levenberg-Marquardt(LM)algorithm is used to optimize the system parameters,and the measurement accuracy and speed are improved to enable online 3D inspection. Static and dynamic online 3D measurements are carried out on a cup and a triple stepped shaft,respectively,to validate the proposed method. The shaft has two steps with the depth of(0.5±0.01)mm and(2±0.01)mm to be measured online when the shaft is rotated and translated at the same time. The measurement results can be output at a frequency of 7 to 11 readings per second with standard deviations of 0.040 mm and 0.051 mm. The experimental results verify the effectiveness and flexibility of the proposed method.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11804213 and 11605109)
文摘We consider a highly unconventional superconducting state with chiral d-wave symmetry in doped graphene under strain with the Gutzwiller–RVB method in the momentum space. It is shown that flat bands emerge in the normal state for reasonable strain. As a result, the superconducting critical temperature is found to be linearly proportional to the strength of the electron–electron interaction. Furthermore, the chiral d-wave superconducting state is shown with coexistence of the charge density wave and the pair density wave. There are different coexisting states with those orders under different doping levels.
