In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot...In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.展开更多
Objective Body fluid mixtures are complex biological samples that frequently occur in crime scenes,and can provide important clues for criminal case analysis.DNA methylation assay has been applied in the identificatio...Objective Body fluid mixtures are complex biological samples that frequently occur in crime scenes,and can provide important clues for criminal case analysis.DNA methylation assay has been applied in the identification of human body fluids,and has exhibited excellent performance in predicting single-source body fluids.The present study aims to develop a methylation SNaPshot multiplex system for body fluid identification,and accurately predict the mixture samples.In addition,the value of DNA methylation in the prediction of body fluid mixtures was further explored.Methods In the present study,420 samples of body fluid mixtures and 250 samples of single body fluids were tested using an optimized multiplex methylation system.Each kind of body fluid sample presented the specific methylation profiles of the 10 markers.Results Significant differences in methylation levels were observed between the mixtures and single body fluids.For all kinds of mixtures,the Spearman’s correlation analysis revealed a significantly strong correlation between the methylation levels and component proportions(1:20,1:10,1:5,1:1,5:1,10:1 and 20:1).Two random forest classification models were trained for the prediction of mixture types and the prediction of the mixture proportion of 2 components,based on the methylation levels of 10 markers.For the mixture prediction,Model-1 presented outstanding prediction accuracy,which reached up to 99.3%in 427 training samples,and had a remarkable accuracy of 100%in 243 independent test samples.For the mixture proportion prediction,Model-2 demonstrated an excellent accuracy of 98.8%in 252 training samples,and 98.2%in 168 independent test samples.The total prediction accuracy reached 99.3%for body fluid mixtures and 98.6%for the mixture proportions.Conclusion These results indicate the excellent capability and powerful value of the multiplex methylation system in the identification of forensic body fluid mixtures.展开更多
The increased adoption of Internet of Medical Things (IoMT) technologies has resulted in the widespread use ofBody Area Networks (BANs) in medical and non-medical domains. However, the performance of IEEE 802.15.4-bas...The increased adoption of Internet of Medical Things (IoMT) technologies has resulted in the widespread use ofBody Area Networks (BANs) in medical and non-medical domains. However, the performance of IEEE 802.15.4-based BANs is impacted by challenges related to heterogeneous data traffic requirements among nodes, includingcontention during finite backoff periods, association delays, and traffic channel access through clear channelassessment (CCA) algorithms. These challenges lead to increased packet collisions, queuing delays, retransmissions,and the neglect of critical traffic, thereby hindering performance indicators such as throughput, packet deliveryratio, packet drop rate, and packet delay. Therefore, we propose Dynamic Next Backoff Period and Clear ChannelAssessment (DNBP-CCA) schemes to address these issues. The DNBP-CCA schemes leverage a combination ofthe Dynamic Next Backoff Period (DNBP) scheme and the Dynamic Next Clear Channel Assessment (DNCCA)scheme. The DNBP scheme employs a fuzzy Takagi, Sugeno, and Kang (TSK) model’s inference system toquantitatively analyze backoff exponent, channel clearance, collision ratio, and data rate as input parameters. Onthe other hand, the DNCCA scheme dynamically adapts the CCA process based on requested data transmission tothe coordinator, considering input parameters such as buffer status ratio and acknowledgement ratio. As a result,simulations demonstrate that our proposed schemes are better than some existing representative approaches andenhance data transmission, reduce node collisions, improve average throughput, and packet delivery ratio, anddecrease average packet drop rate and packet delay.展开更多
Based on the geochemical,seismic,logging and drilling data,the Fuyu reservoirs of the Lower Cretaceous Quantou Formation in northern Songliao Basin are systematically studied in terms of the geological characteristics...Based on the geochemical,seismic,logging and drilling data,the Fuyu reservoirs of the Lower Cretaceous Quantou Formation in northern Songliao Basin are systematically studied in terms of the geological characteristics,the tight oil enrichment model and its major controlling factors.First,the Quantou Formation is overlaid by high-quality source rocks of the Upper Cretaceous Qingshankou Formation,with the development of nose structure around sag and the broad and continuous distribution of sand bodies.The reservoirs are tight on the whole.Second,the configuration of multiple elements,such as high-quality source rocks,reservoir rocks,fault,overpressure and structure,controls the tight oil enrichment in the Fuyu reservoirs.The source-reservoir combination controls the tight oil distribution pattern.The pressure difference between source and reservoir drives the charging of tight oil.The fault-sandbody transport system determines the migration and accumulation of oil and gas.The positive structure is the favorable place for tight oil enrichment,and the fault-horst zone is the key part of syncline area for tight oil exploration.Third,based on the source-reservoir relationship,transport mode,accumulation dynamics and other elements,three tight oil enrichment models are recognized in the Fuyu reservoirs:(1)vertical or lateral migration of hydrocarbon from source rocks to adjacent reservoir rocks,that is,driven by overpressure,hydrocarbon generated is migrated vertically or laterally to and accumulates in the adjacent reservoir rocks;(2)transport of hydrocarbon through faults between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downward through faults to the sandbodies that are separated from the source rocks;and(3)migration of hydrocarbon through faults and sandbodies between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downwards through faults to the reservoir rocks that are separated from the source rocks,and then migrates laterally through sandbodies.Fourth,the differences in oil source conditions,charging drive,fault distribution,sandbody and reservoir physical properties cause the differential enrichment of tight oil in the Fuyu reservoirs.Comprehensive analysis suggests that the Fuyu reservoir in the Qijia-Gulong Sag has good conditions for tight oil enrichment and has been less explored,and it is an important new zone for tight oil exploration in the future.展开更多
Characterization of the spatial and temporal variability of stable isotopes in surface water is essential for interpreting hydrological processes.In this study,we collected the water samples of river water,groundwater...Characterization of the spatial and temporal variability of stable isotopes in surface water is essential for interpreting hydrological processes.In this study,we collected the water samples of river water,groundwater,and reservoir water in the Burqin River Basin of the Altay Mountains,China in 2021,and characterized the oxygen and hydrogen isotope variations in different water bodies via instrumental analytics and modeling.Results showed significant seasonal variations in stable isotope ratios of oxygen and hydrogen(δ18O andδ2H,respectively)and significant differences inδ18O andδ2H among different water bodies.Higherδ18O andδ2H values were mainly found in river water,while groundwater and reservoir water had lower isotope ratios.River water and groundwater showed differentδ18O-δ2H relationships with the local meteoric water line,implying that river water and groundwater are controlled by evaporative enrichment and multi-source recharge processes.The evaporative enrichment experienced by reservoir water was less significant and largely influenced by topography,recharge sources,local moisture cycling,and anthropogenic factors.Higher deuterium excess(d-excess)value of 14.34‰for river water probably represented the isotopic signature of combined contributions from direct precipitation,snow and glacial meltwater,and groundwater recharge.The average annual d-excess values of groundwater(10.60‰)and reservoir water(11.49‰)were similar to the value of global precipitation(10.00‰).The findings contribute to understanding the hydroclimatic information reflected in the month-by-month variations in stable isotopes in different water bodies and provide a reference for the study of hydrological processes and climate change in the Altay Mountains,China.展开更多
[Objectives]To investigate the synergistic effect of Arnebiae Radix after processing.[Methods]The effects of raw Arnebiae Radix and milk processed Arnebiae Radix on hypothermia in yeast-induced febrile rats were compa...[Objectives]To investigate the synergistic effect of Arnebiae Radix after processing.[Methods]The effects of raw Arnebiae Radix and milk processed Arnebiae Radix on hypothermia in yeast-induced febrile rats were compared.[Results]The processed and unprocessed Arnebiae Radix at high,medium and low doses all had a certain effect on inhibiting the rise of body temperature in rats.The high dose unprocessed group,the medium dose processed group and the high dose processed group had the best inhibitory effect on body temperature,the low dose processed group could delay the fever time,and the low dose unprocessed group had poor inhibitory effect on fever.[Conclusions]The prepared Arnebiae Radix has enhanced drug effect,and milk processed Arnebiae Radix can be used to replace common Arnebiae Radix to reduce the dosage of Arnebiae Radix and save Arnebiae Radix resources.展开更多
This brief note brings the reader up-to-date with the recent successes of the new Haug-Tatum cosmology model. In particular, the significance of recent proof that the Stefan-Boltzmann law applies to such a model is em...This brief note brings the reader up-to-date with the recent successes of the new Haug-Tatum cosmology model. In particular, the significance of recent proof that the Stefan-Boltzmann law applies to such a model is emphasized and a rationale for this is given. Remarkably, the proposed solutions of this model have incorporated all 580 supernova redshifts in the Union2 database. Therefore, one can usefully apply this thermodynamic law in the form of a continually expanding black-body universe model. To our knowledge, no other cosmological model has achieved such high-precision observational correlation.展开更多
The current agricultural conflicts of China are analyzed and the forms and drawbacks of current agricultural industrial structure are listed.The situations for intensifying the farmland with appropriate scale are anal...The current agricultural conflicts of China are analyzed and the forms and drawbacks of current agricultural industrial structure are listed.The situations for intensifying the farmland with appropriate scale are analyzed from the aspects of policy,farmers,farms and modernization of agriculture.It is pointed out that the situations for the intensive use of land are becoming mature.Taking the single pig-breeding chain as an example,the agricultural industrialization model,which takes farmers as the main body,is expounded.Besides,its functions and significance in solving "the three agriculture problems" and facilitating the modernization of agriculture are discussed.展开更多
This paper analyzes the applications of four air terminal device(ATD)models(i.e.,the basic model,the box model,the N-point momentum model,the jet main region specification model)in computational fluid dynamics(CF...This paper analyzes the applications of four air terminal device(ATD)models(i.e.,the basic model,the box model,the N-point momentum model,the jet main region specification model)in computational fluid dynamics(CFD)simulation and their performance in case study.A full-scale experiment is performed in an environment chamber,and the measured air velocity and temperature fields are compared with the simulation results by using four ATD models.The velocity and temperature fields are measured by an omni-directional thermo-anemometer system.It demonstrates that the basic model and the box model are not applicable to complicated air terminal devices.At the occupant area,the relative errors between simulated and measured air velocities are less than 20% based on the N-point momentum model and the jet main region specification model.Around the ATD zone,the relative error between the numerical and measured air velocity based on the jet main region specification model is less than 15%.The jet main region specification model is proved to be an applicable approach and a more accurate way to study the airflow pattern around the ATD with complicated geometry.展开更多
According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are prese...According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.展开更多
Spot weld models are widely used in finite element analysis(FEA) of automotive body in white(BIW) to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on...Spot weld models are widely used in finite element analysis(FEA) of automotive body in white(BIW) to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on evaluation of the validity of these spot weld models in structural dynamic analysis of BIW.To evaluate the validity and accuracy of spot weld models in structural dynamic analysis of BIW,two object functions,error function and deviation function,are introduced innovatively.Modal analysis of Two-panel and Double-hat structures,which are the dominated structures in BIW,is conducted,and the values of these two object functions are obtained.Based on the values of object functions,the validity of these spot weld models are evaluated.It is found that the area contact method(ACM2) and weld element connection(CWELD) can give more precise prediction in modal analysis of these two classical structures,thus are more applicable to structural dynamic analysis of automotive BIW.Modal analysis of a classical BIW is performed,which further confirms this evaluation.The error function and deviation function proposed in this research can give guidance on the adaptability of spot weld models in structural dynamic analysis of BIW.And this evaluation method can also be adopted in evaluation of other finite element models in static,dynamic and other kinds of analysis for automotive structures.展开更多
Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch ...Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.展开更多
In order to determine the control dimensions of human body in pattern construction and provide the basis for size specification in clothing industry, a gray model is described and established in the application of pre...In order to determine the control dimensions of human body in pattern construction and provide the basis for size specification in clothing industry, a gray model is described and established in the application of predicting size specification. By comparing the features of gray model and regression model, it is proved that the former has many advantages over the latter, i.e. more practical and more effective in this application. So it is strongly suggested to apply the innovative gray model instead of the traditional regression model to facilitate the calculation procedure in pattern construction.展开更多
A new organization and management mechanism with the local government as the main body was created during the post-disaster reconstruction of the "4. 20 " Lushan earthquake,in which the experiences and lesso...A new organization and management mechanism with the local government as the main body was created during the post-disaster reconstruction of the "4. 20 " Lushan earthquake,in which the experiences and lessons were drawn from the "5. 12"Wenchuan earthquake. Correspondingly, the local government conducted an exploration of the organization and management mode in the field of planning and construction. The effective experiences have been accumulated, including working out a full coverage planning,taking the leading part in the urban-rural planning,and exercising whole space control over the disaster area. An innovation management mode named as "Five Generals Pattern"was implemented in the construction projects. In view that the rural housing reconstruction was a weak link, a new approach to improving the construction management was investigated,by means of strengthening on-site supervision,establishing a technical platform,and bolstering public participation.展开更多
This paper proposes the analysis model of sports human body based on computer vision tracking technology. Visual target tracking is an important research field of the computer vision, motion trajectory and it can prov...This paper proposes the analysis model of sports human body based on computer vision tracking technology. Visual target tracking is an important research field of the computer vision, motion trajectory and it can provide not only the goal, to provide the initial data movement analysis, scene understanding, behavior or the event detection in intelligent surveillance, human-computer interaction, robot visual navigation and motion recognition based on field has a broad application prospect. For this reason, it is possible to consider the use of a large number of unlabeled samples to assist the training classifier to improve its performance. This type of machine learning method using both labeled and that unlabeled samples is called the semi-supervised learning. This paper proposes the novel idea of the related research topics to propose the new perspective of the model that will be later give us the novel idea of making it efficient for further development of sport science.展开更多
Bedrock and concrete lining are typical composite structures in the engineering field and the stability of the geological body and engineering body is directly connected to the mechanical properties of the composite b...Bedrock and concrete lining are typical composite structures in the engineering field and the stability of the geological body and engineering body is directly connected to the mechanical properties of the composite body.Under this background,the study provides the transverse isotropic equivalent model of concrete-granite double-layer composite based on the notion of strain energy equivalence.Assuming that the strength failure of concrete and granite meets the Mohr-Coulomb criterion,then the strength failure model of the combined body considering the joint roughness coefficient(JRC)is derived,and the influences of JRC,the height ratio of concrete to granite,and confining pressure on the strength failure characteristics of the combined body are emphatically analyzed.Finally,the model applicability is illustrated by the uniaxial and triaxial compression tests on concrete monomer,granite monomer and concretegranite composite samples(CGCSs)with different JRCs.The results revealed that the compressive strength of the composite is closer to the concrete with lower strength in the combined body under different confining pressures.Adding interface roughness causes to raise the compressive strength of the composite due to interfacial adhesion between concrete and granite,and a slowing growth trend is observed in compressive strength as roughness.The model can provide a certain reference for the stability design and evaluation of engineering rock mass.展开更多
In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with som...In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with some subsystems to form the complete integrated deep ocean mining pilot system and perform dynamic analysis, a new method for the dynamic modeling and analysis of the miner is proposed and developed in this paper, resulting in a simplified 3D single-body vehicle model with three translational and three rotational degrees of freedom, while the track-terrain interaction model is built by partitioning the track-terrain interface into discrete elements with parameterized force dements built on the theory of terramechanics acting on each discrete dement. To evaluate and verify the correctness and effectiveness of this new modeling and analysis method, typical comparative studies with regard to computational efficiency and solution accuracy are carried out between the traditional modeling method of building the tracked vehicle as a multi-body model and the new modeling method. In full consideration of the particMar structure design of the pilot miner, the special characteristics of the seafioor soil and the hydrodynamic force of near-seafloor currnt, the dynamic simulation analysis of the miner is performed and discussed, which can provide useful guidance and reference for the practical miner system in design and operation. This new method can not only realize the rapid dynamic simulation analysis of the miner but also make possible the integration and rapid dynamic analysis of the complete integrated deep ocean mining pilot system in further researches.展开更多
The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, howev- er, are expensive, limiting the availability of 3D body models. In this paper, we focus on the hu...The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, howev- er, are expensive, limiting the availability of 3D body models. In this paper, we focus on the human body 3D modeling using one Kinect sensor modeling method. To get the human body model fast, three steps in rapid modeling of the human body are carried out. Firstly, according to anthropometric parameters, the standard model is parameterized; Secondly, the Kinect depth image of the human body model is gotten through, then, by using the PCL library the point cloud data is processed and matched, and the human body model is optimized; Finally, the realistic human body model is obtained with the rapid integration of the standard model and PCL library.展开更多
The objective of this study was to estimate genetic parameters of body width(BW)to body length(BL)ratio(BW/BL)and of body weight traits(BWT)in turbot,and to elucidate the genetic mechanism of the two traits during ont...The objective of this study was to estimate genetic parameters of body width(BW)to body length(BL)ratio(BW/BL)and of body weight traits(BWT)in turbot,and to elucidate the genetic mechanism of the two traits during ontogeny by dynamic genetic analysis.From 3 to 27 months,BW,BL and BWT of each communally stocked fish were measured every 3 months.The BW/BL ratio was measured at different sampling ages.A twotrait animal model was used for genetic evaluation of traits.The results showed that the heritability values of BW/BL ratio ranged from 0.2168 to 0.3148,corresponding to moderate heritability.The BWT heritability values ranged from 0.2702 to 0.3479 corresponding to moderate heritability.The heritability of BW/BL ratio was lower than that of BWT,except at 3 months of age.Genetic correlation between BW/BL ratio and BWT decreased throughout the measurement period.Genetic correlations were higher than the phenotypic correlations.The current results for estimating genetic parameters demonstrate that the BW/BL ratio could be used as a phenotypic marker of fast-growing turbot,and the BW/BL ratio and BWT could be improved simultaneously through selective breeding.展开更多
基金Supported by the Sinopec Science and Technology Project(P21040-1).
文摘In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.
基金supported by the grants from the Natural Science Foundation of Hubei Province(No.2020CFB780)the Fundamental Research Funds for the Central Universities(No.2017KFYXJJ020).
文摘Objective Body fluid mixtures are complex biological samples that frequently occur in crime scenes,and can provide important clues for criminal case analysis.DNA methylation assay has been applied in the identification of human body fluids,and has exhibited excellent performance in predicting single-source body fluids.The present study aims to develop a methylation SNaPshot multiplex system for body fluid identification,and accurately predict the mixture samples.In addition,the value of DNA methylation in the prediction of body fluid mixtures was further explored.Methods In the present study,420 samples of body fluid mixtures and 250 samples of single body fluids were tested using an optimized multiplex methylation system.Each kind of body fluid sample presented the specific methylation profiles of the 10 markers.Results Significant differences in methylation levels were observed between the mixtures and single body fluids.For all kinds of mixtures,the Spearman’s correlation analysis revealed a significantly strong correlation between the methylation levels and component proportions(1:20,1:10,1:5,1:1,5:1,10:1 and 20:1).Two random forest classification models were trained for the prediction of mixture types and the prediction of the mixture proportion of 2 components,based on the methylation levels of 10 markers.For the mixture prediction,Model-1 presented outstanding prediction accuracy,which reached up to 99.3%in 427 training samples,and had a remarkable accuracy of 100%in 243 independent test samples.For the mixture proportion prediction,Model-2 demonstrated an excellent accuracy of 98.8%in 252 training samples,and 98.2%in 168 independent test samples.The total prediction accuracy reached 99.3%for body fluid mixtures and 98.6%for the mixture proportions.Conclusion These results indicate the excellent capability and powerful value of the multiplex methylation system in the identification of forensic body fluid mixtures.
基金Research Supporting Project Number(RSP2024R421),King Saud University,Riyadh,Saudi Arabia。
文摘The increased adoption of Internet of Medical Things (IoMT) technologies has resulted in the widespread use ofBody Area Networks (BANs) in medical and non-medical domains. However, the performance of IEEE 802.15.4-based BANs is impacted by challenges related to heterogeneous data traffic requirements among nodes, includingcontention during finite backoff periods, association delays, and traffic channel access through clear channelassessment (CCA) algorithms. These challenges lead to increased packet collisions, queuing delays, retransmissions,and the neglect of critical traffic, thereby hindering performance indicators such as throughput, packet deliveryratio, packet drop rate, and packet delay. Therefore, we propose Dynamic Next Backoff Period and Clear ChannelAssessment (DNBP-CCA) schemes to address these issues. The DNBP-CCA schemes leverage a combination ofthe Dynamic Next Backoff Period (DNBP) scheme and the Dynamic Next Clear Channel Assessment (DNCCA)scheme. The DNBP scheme employs a fuzzy Takagi, Sugeno, and Kang (TSK) model’s inference system toquantitatively analyze backoff exponent, channel clearance, collision ratio, and data rate as input parameters. Onthe other hand, the DNCCA scheme dynamically adapts the CCA process based on requested data transmission tothe coordinator, considering input parameters such as buffer status ratio and acknowledgement ratio. As a result,simulations demonstrate that our proposed schemes are better than some existing representative approaches andenhance data transmission, reduce node collisions, improve average throughput, and packet delivery ratio, anddecrease average packet drop rate and packet delay.
基金Supported by the PetroChina Science and Technology Major Project(2016E0201)。
文摘Based on the geochemical,seismic,logging and drilling data,the Fuyu reservoirs of the Lower Cretaceous Quantou Formation in northern Songliao Basin are systematically studied in terms of the geological characteristics,the tight oil enrichment model and its major controlling factors.First,the Quantou Formation is overlaid by high-quality source rocks of the Upper Cretaceous Qingshankou Formation,with the development of nose structure around sag and the broad and continuous distribution of sand bodies.The reservoirs are tight on the whole.Second,the configuration of multiple elements,such as high-quality source rocks,reservoir rocks,fault,overpressure and structure,controls the tight oil enrichment in the Fuyu reservoirs.The source-reservoir combination controls the tight oil distribution pattern.The pressure difference between source and reservoir drives the charging of tight oil.The fault-sandbody transport system determines the migration and accumulation of oil and gas.The positive structure is the favorable place for tight oil enrichment,and the fault-horst zone is the key part of syncline area for tight oil exploration.Third,based on the source-reservoir relationship,transport mode,accumulation dynamics and other elements,three tight oil enrichment models are recognized in the Fuyu reservoirs:(1)vertical or lateral migration of hydrocarbon from source rocks to adjacent reservoir rocks,that is,driven by overpressure,hydrocarbon generated is migrated vertically or laterally to and accumulates in the adjacent reservoir rocks;(2)transport of hydrocarbon through faults between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downward through faults to the sandbodies that are separated from the source rocks;and(3)migration of hydrocarbon through faults and sandbodies between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downwards through faults to the reservoir rocks that are separated from the source rocks,and then migrates laterally through sandbodies.Fourth,the differences in oil source conditions,charging drive,fault distribution,sandbody and reservoir physical properties cause the differential enrichment of tight oil in the Fuyu reservoirs.Comprehensive analysis suggests that the Fuyu reservoir in the Qijia-Gulong Sag has good conditions for tight oil enrichment and has been less explored,and it is an important new zone for tight oil exploration in the future.
基金This work was funded by the Science and Technology Program of Gansu Province(23ZDFA017,22ZD6FA005)the Third Xinjiang Scientific Expedition Program(2022xjkk0802).
文摘Characterization of the spatial and temporal variability of stable isotopes in surface water is essential for interpreting hydrological processes.In this study,we collected the water samples of river water,groundwater,and reservoir water in the Burqin River Basin of the Altay Mountains,China in 2021,and characterized the oxygen and hydrogen isotope variations in different water bodies via instrumental analytics and modeling.Results showed significant seasonal variations in stable isotope ratios of oxygen and hydrogen(δ18O andδ2H,respectively)and significant differences inδ18O andδ2H among different water bodies.Higherδ18O andδ2H values were mainly found in river water,while groundwater and reservoir water had lower isotope ratios.River water and groundwater showed differentδ18O-δ2H relationships with the local meteoric water line,implying that river water and groundwater are controlled by evaporative enrichment and multi-source recharge processes.The evaporative enrichment experienced by reservoir water was less significant and largely influenced by topography,recharge sources,local moisture cycling,and anthropogenic factors.Higher deuterium excess(d-excess)value of 14.34‰for river water probably represented the isotopic signature of combined contributions from direct precipitation,snow and glacial meltwater,and groundwater recharge.The average annual d-excess values of groundwater(10.60‰)and reservoir water(11.49‰)were similar to the value of global precipitation(10.00‰).The findings contribute to understanding the hydroclimatic information reflected in the month-by-month variations in stable isotopes in different water bodies and provide a reference for the study of hydrological processes and climate change in the Altay Mountains,China.
基金Health Science and Technology Program of Inner Mongolia Autonomous Region(202201450)Key R&D and Achievement Transformation Project of Inner Mongolia Autonomous Region(2023YFDZ0063)+3 种基金Project of Improving the Scientific Research and Innovation Ability of Young Teachers in Universities Directly under Inner Mongolia Autonomous Region(GXKY22139)Open Fund Project of National and Local Joint Engineering Research Center for Mongolian Medicine Research and Development(MDK2021026)Key Discipline Construction Project of Traditional Chinese Pharmacy(Mongolian Pharmacy)of Inner Mongolia Minzu University(ZYX007)Basic Operating Expenses for Scientific Research of Universities Directly under Inner Mongolia Autonomous Region in 2022"Study on the Change of Shikonin Content During Milk Processed Arnebiae Radix".
文摘[Objectives]To investigate the synergistic effect of Arnebiae Radix after processing.[Methods]The effects of raw Arnebiae Radix and milk processed Arnebiae Radix on hypothermia in yeast-induced febrile rats were compared.[Results]The processed and unprocessed Arnebiae Radix at high,medium and low doses all had a certain effect on inhibiting the rise of body temperature in rats.The high dose unprocessed group,the medium dose processed group and the high dose processed group had the best inhibitory effect on body temperature,the low dose processed group could delay the fever time,and the low dose unprocessed group had poor inhibitory effect on fever.[Conclusions]The prepared Arnebiae Radix has enhanced drug effect,and milk processed Arnebiae Radix can be used to replace common Arnebiae Radix to reduce the dosage of Arnebiae Radix and save Arnebiae Radix resources.
文摘This brief note brings the reader up-to-date with the recent successes of the new Haug-Tatum cosmology model. In particular, the significance of recent proof that the Stefan-Boltzmann law applies to such a model is emphasized and a rationale for this is given. Remarkably, the proposed solutions of this model have incorporated all 580 supernova redshifts in the Union2 database. Therefore, one can usefully apply this thermodynamic law in the form of a continually expanding black-body universe model. To our knowledge, no other cosmological model has achieved such high-precision observational correlation.
文摘The current agricultural conflicts of China are analyzed and the forms and drawbacks of current agricultural industrial structure are listed.The situations for intensifying the farmland with appropriate scale are analyzed from the aspects of policy,farmers,farms and modernization of agriculture.It is pointed out that the situations for the intensive use of land are becoming mature.Taking the single pig-breeding chain as an example,the agricultural industrialization model,which takes farmers as the main body,is expounded.Besides,its functions and significance in solving "the three agriculture problems" and facilitating the modernization of agriculture are discussed.
文摘This paper analyzes the applications of four air terminal device(ATD)models(i.e.,the basic model,the box model,the N-point momentum model,the jet main region specification model)in computational fluid dynamics(CFD)simulation and their performance in case study.A full-scale experiment is performed in an environment chamber,and the measured air velocity and temperature fields are compared with the simulation results by using four ATD models.The velocity and temperature fields are measured by an omni-directional thermo-anemometer system.It demonstrates that the basic model and the box model are not applicable to complicated air terminal devices.At the occupant area,the relative errors between simulated and measured air velocities are less than 20% based on the N-point momentum model and the jet main region specification model.Around the ATD zone,the relative error between the numerical and measured air velocity based on the jet main region specification model is less than 15%.The jet main region specification model is proved to be an applicable approach and a more accurate way to study the airflow pattern around the ATD with complicated geometry.
文摘According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.
基金supported by National Natural Science Foundation of China(Grant No.10772060)Heilongjiang Provincial Natural Science Foundation with Excellent Young Investigators of China(GrantNo.JC2006-13)
文摘Spot weld models are widely used in finite element analysis(FEA) of automotive body in white(BIW) to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on evaluation of the validity of these spot weld models in structural dynamic analysis of BIW.To evaluate the validity and accuracy of spot weld models in structural dynamic analysis of BIW,two object functions,error function and deviation function,are introduced innovatively.Modal analysis of Two-panel and Double-hat structures,which are the dominated structures in BIW,is conducted,and the values of these two object functions are obtained.Based on the values of object functions,the validity of these spot weld models are evaluated.It is found that the area contact method(ACM2) and weld element connection(CWELD) can give more precise prediction in modal analysis of these two classical structures,thus are more applicable to structural dynamic analysis of automotive BIW.Modal analysis of a classical BIW is performed,which further confirms this evaluation.The error function and deviation function proposed in this research can give guidance on the adaptability of spot weld models in structural dynamic analysis of BIW.And this evaluation method can also be adopted in evaluation of other finite element models in static,dynamic and other kinds of analysis for automotive structures.
基金supported by National Natural Science Foundation of China (Grant No. 60873003)
文摘Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.
文摘In order to determine the control dimensions of human body in pattern construction and provide the basis for size specification in clothing industry, a gray model is described and established in the application of predicting size specification. By comparing the features of gray model and regression model, it is proved that the former has many advantages over the latter, i.e. more practical and more effective in this application. So it is strongly suggested to apply the innovative gray model instead of the traditional regression model to facilitate the calculation procedure in pattern construction.
基金sponsored by the Science and Technology Support Project Funds of Sichuan Province ( Item No. 2013FZ0009 )Educational Reform Project Funds of Sichuan AgriculturalUniversity ( Item No. 2015064 )the National Natural Science Foundation of China ( Item No. 51278421)
文摘A new organization and management mechanism with the local government as the main body was created during the post-disaster reconstruction of the "4. 20 " Lushan earthquake,in which the experiences and lessons were drawn from the "5. 12"Wenchuan earthquake. Correspondingly, the local government conducted an exploration of the organization and management mode in the field of planning and construction. The effective experiences have been accumulated, including working out a full coverage planning,taking the leading part in the urban-rural planning,and exercising whole space control over the disaster area. An innovation management mode named as "Five Generals Pattern"was implemented in the construction projects. In view that the rural housing reconstruction was a weak link, a new approach to improving the construction management was investigated,by means of strengthening on-site supervision,establishing a technical platform,and bolstering public participation.
文摘This paper proposes the analysis model of sports human body based on computer vision tracking technology. Visual target tracking is an important research field of the computer vision, motion trajectory and it can provide not only the goal, to provide the initial data movement analysis, scene understanding, behavior or the event detection in intelligent surveillance, human-computer interaction, robot visual navigation and motion recognition based on field has a broad application prospect. For this reason, it is possible to consider the use of a large number of unlabeled samples to assist the training classifier to improve its performance. This type of machine learning method using both labeled and that unlabeled samples is called the semi-supervised learning. This paper proposes the novel idea of the related research topics to propose the new perspective of the model that will be later give us the novel idea of making it efficient for further development of sport science.
基金The authors would like to acknowledge financial supports from the National Natural Science Foundation of China(Nos.41941019 and 52274145)Department of Science and Technology of Shaanxi Province(No.2021TD-55)+2 种基金“111”Center,Program of the Ministry of Education of China(No.B18046)Natural Science Foundation of Shaanxi Province(No.2020JQ-373)the Fundamental Research Funds for the Central Universities,CHD(No.300102261101).
文摘Bedrock and concrete lining are typical composite structures in the engineering field and the stability of the geological body and engineering body is directly connected to the mechanical properties of the composite body.Under this background,the study provides the transverse isotropic equivalent model of concrete-granite double-layer composite based on the notion of strain energy equivalence.Assuming that the strength failure of concrete and granite meets the Mohr-Coulomb criterion,then the strength failure model of the combined body considering the joint roughness coefficient(JRC)is derived,and the influences of JRC,the height ratio of concrete to granite,and confining pressure on the strength failure characteristics of the combined body are emphatically analyzed.Finally,the model applicability is illustrated by the uniaxial and triaxial compression tests on concrete monomer,granite monomer and concretegranite composite samples(CGCSs)with different JRCs.The results revealed that the compressive strength of the composite is closer to the concrete with lower strength in the combined body under different confining pressures.Adding interface roughness causes to raise the compressive strength of the composite due to interfacial adhesion between concrete and granite,and a slowing growth trend is observed in compressive strength as roughness.The model can provide a certain reference for the stability design and evaluation of engineering rock mass.
基金supported by the National High Technology Research and Development Program of China(863 Program, Grant No.2006AA09Z240)the National Deep-Sea Technology Project of Development and Re-search(Grant No.DYXM-115-04-02-01)
文摘In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with some subsystems to form the complete integrated deep ocean mining pilot system and perform dynamic analysis, a new method for the dynamic modeling and analysis of the miner is proposed and developed in this paper, resulting in a simplified 3D single-body vehicle model with three translational and three rotational degrees of freedom, while the track-terrain interaction model is built by partitioning the track-terrain interface into discrete elements with parameterized force dements built on the theory of terramechanics acting on each discrete dement. To evaluate and verify the correctness and effectiveness of this new modeling and analysis method, typical comparative studies with regard to computational efficiency and solution accuracy are carried out between the traditional modeling method of building the tracked vehicle as a multi-body model and the new modeling method. In full consideration of the particMar structure design of the pilot miner, the special characteristics of the seafioor soil and the hydrodynamic force of near-seafloor currnt, the dynamic simulation analysis of the miner is performed and discussed, which can provide useful guidance and reference for the practical miner system in design and operation. This new method can not only realize the rapid dynamic simulation analysis of the miner but also make possible the integration and rapid dynamic analysis of the complete integrated deep ocean mining pilot system in further researches.
基金Supported by MOE(Ministry of Education in China)Project of Humanities and Social Sciences(No.13YJC890027)the National Natural Science Foundations of China(No.61003173)+1 种基金the Fundamental Research Funds for the Central Universities(No.2012ZZ0063)the Science and Technology Project of Guangzhou City(No.2012J4100002)
文摘The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, howev- er, are expensive, limiting the availability of 3D body models. In this paper, we focus on the human body 3D modeling using one Kinect sensor modeling method. To get the human body model fast, three steps in rapid modeling of the human body are carried out. Firstly, according to anthropometric parameters, the standard model is parameterized; Secondly, the Kinect depth image of the human body model is gotten through, then, by using the PCL library the point cloud data is processed and matched, and the human body model is optimized; Finally, the realistic human body model is obtained with the rapid integration of the standard model and PCL library.
基金The Earmarked Fund for Modern Agro-Industry Technology Research System under contract No.CARS-47-G01the Ao Shan Talents Cultivation Program supported by Qingdao National Laboratory for Marine Science and Technology under contract No.2017ASTCP-OS04+2 种基金the Agricultural Fine Breed Project of Shandong under contract No.2016LZGC031the Chinese Academy of Fishery Sciences Basal Research Fund under contract No.2016HY-JC0302the National Key Research and Development Program under contract No.2018YFD0900102
文摘The objective of this study was to estimate genetic parameters of body width(BW)to body length(BL)ratio(BW/BL)and of body weight traits(BWT)in turbot,and to elucidate the genetic mechanism of the two traits during ontogeny by dynamic genetic analysis.From 3 to 27 months,BW,BL and BWT of each communally stocked fish were measured every 3 months.The BW/BL ratio was measured at different sampling ages.A twotrait animal model was used for genetic evaluation of traits.The results showed that the heritability values of BW/BL ratio ranged from 0.2168 to 0.3148,corresponding to moderate heritability.The BWT heritability values ranged from 0.2702 to 0.3479 corresponding to moderate heritability.The heritability of BW/BL ratio was lower than that of BWT,except at 3 months of age.Genetic correlation between BW/BL ratio and BWT decreased throughout the measurement period.Genetic correlations were higher than the phenotypic correlations.The current results for estimating genetic parameters demonstrate that the BW/BL ratio could be used as a phenotypic marker of fast-growing turbot,and the BW/BL ratio and BWT could be improved simultaneously through selective breeding.