Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerica...Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerical simulation of the self-mixing interference signal has been done,the results show that when the external cavity length is integral times of 1/2,1/3,2/3,1/4,3/4 of the effective cavity length,the intensity of the self-mixing interference signals reach maximum in value.While that of single mode laser is integral times of half of the effective cavity length,the measuring precision of displacement of single mode laser is λ/2.A conclusion can be drawn from the above results that the measuring precision of displacement of multi-mode laser is higher than that of single mode laser.展开更多
A multi-mode adaptive controller was proposed. The controller features in thecombination of Bang-bang and Fuzzy PID controls with state predictor. When large error exists, thecontroller operates in Bang-bang mode, oth...A multi-mode adaptive controller was proposed. The controller features in thecombination of Bang-bang and Fuzzy PID controls with state predictor. When large error exists, thecontroller operates in Bang-bang mode, otherwise it works as a fuzzy PID controller. For only fewparameters to be adjusted, the real time controlled system achieveed good stability and fastresponse. Furthermore, the introduction of state observer was also discussed to extend thecapability of the proposed controller to the plant with time-delay factors. The classical PIDcontroller and the multi-mode controller were applied to the same second-order system successively.By comparison of the simulation results, the effectiveness of the controller were shown. At last, onelectric-wire production line, this approach was practiced to control electric-wire diameter withan additive random disturbance signal. The test result further proved the effectiveness of themulti-mode controller.展开更多
The gestation and occurrence of strong earthquakes are closely related to fault activity, which is not only revealed by abundant experimentation and seismism but also proved by modern seismology. On the Chinese mainla...The gestation and occurrence of strong earthquakes are closely related to fault activity, which is not only revealed by abundant experimentation and seismism but also proved by modern seismology. On the Chinese mainland, the relation between earthquake activity and active faults is one of the bases for partitioning potential seismic sources, analyzing the seismotectonics and estimating location of strong earthquakes.Due to the nonuniformity of earth media, instability of observation systems and disturbance of the environment, etc, the variety of observational data is complicated, that is, there is no absolutely "normal" or "abnormal", and seismic anomalies can be divided into many mutually exclusive "abnormal states". In different conditions of combined time-space-strength, determining seismic anomalies by different monomial forecast methods and its efficiency could be different due to the uncertainty of a precursor itself or complexity of the relationship between a precursor and earthquake gestation. It is very difficult to discover and dispose of this difference in actual application in a "two-state" model. But in a "multi-state" model, the difference can be easily reflected and the optimal combination of forecasting parameters for a forecast method can also be determined easily.Based on the "multi-state" precursory model and the optimization method for parameters of earthquake forecast model under the condition of optimal forecast efficiency, the relationship of the spatial location of earthquake with M≥6.0 and active faults in three seismic belts are analyzed. The results demonstrate that in the Hetao Seismic Belt, seismicity is mostly concentrated in the range of 20 km along the fault, the optimization model can forecast the location of potential earthquakes of M≥6.0 near the faults with a relatively high accuracy and the reliability is 0.5; while in the Qilian Mt. Seismic Belt, the reliability only reaches 0.14 when we use the model to estimate earthquakes within 30 km range along the faults. The "multi-state" precursory model, the efficiency-evaluating model and the parameter selection of individual earthquake forecast model based on optimal efficiency are of certain revelatory and practicable meanings for developing knowledge about precursors, investigating the laws of earthquake preparation and searching for optimal forecasting methods.展开更多
文摘Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerical simulation of the self-mixing interference signal has been done,the results show that when the external cavity length is integral times of 1/2,1/3,2/3,1/4,3/4 of the effective cavity length,the intensity of the self-mixing interference signals reach maximum in value.While that of single mode laser is integral times of half of the effective cavity length,the measuring precision of displacement of single mode laser is λ/2.A conclusion can be drawn from the above results that the measuring precision of displacement of multi-mode laser is higher than that of single mode laser.
基金This research was financially supported by the Open Fund of the Fieldbus tech& Automation Beijing Key Lab (No.2002.19-21).
文摘A multi-mode adaptive controller was proposed. The controller features in thecombination of Bang-bang and Fuzzy PID controls with state predictor. When large error exists, thecontroller operates in Bang-bang mode, otherwise it works as a fuzzy PID controller. For only fewparameters to be adjusted, the real time controlled system achieveed good stability and fastresponse. Furthermore, the introduction of state observer was also discussed to extend thecapability of the proposed controller to the plant with time-delay factors. The classical PIDcontroller and the multi-mode controller were applied to the same second-order system successively.By comparison of the simulation results, the effectiveness of the controller were shown. At last, onelectric-wire production line, this approach was practiced to control electric-wire diameter withan additive random disturbance signal. The test result further proved the effectiveness of themulti-mode controller.
基金This project was sponsored by the Joint Earthquake Science Foundation of CEA(Grant No.103075 and No.104016)
文摘The gestation and occurrence of strong earthquakes are closely related to fault activity, which is not only revealed by abundant experimentation and seismism but also proved by modern seismology. On the Chinese mainland, the relation between earthquake activity and active faults is one of the bases for partitioning potential seismic sources, analyzing the seismotectonics and estimating location of strong earthquakes.Due to the nonuniformity of earth media, instability of observation systems and disturbance of the environment, etc, the variety of observational data is complicated, that is, there is no absolutely "normal" or "abnormal", and seismic anomalies can be divided into many mutually exclusive "abnormal states". In different conditions of combined time-space-strength, determining seismic anomalies by different monomial forecast methods and its efficiency could be different due to the uncertainty of a precursor itself or complexity of the relationship between a precursor and earthquake gestation. It is very difficult to discover and dispose of this difference in actual application in a "two-state" model. But in a "multi-state" model, the difference can be easily reflected and the optimal combination of forecasting parameters for a forecast method can also be determined easily.Based on the "multi-state" precursory model and the optimization method for parameters of earthquake forecast model under the condition of optimal forecast efficiency, the relationship of the spatial location of earthquake with M≥6.0 and active faults in three seismic belts are analyzed. The results demonstrate that in the Hetao Seismic Belt, seismicity is mostly concentrated in the range of 20 km along the fault, the optimization model can forecast the location of potential earthquakes of M≥6.0 near the faults with a relatively high accuracy and the reliability is 0.5; while in the Qilian Mt. Seismic Belt, the reliability only reaches 0.14 when we use the model to estimate earthquakes within 30 km range along the faults. The "multi-state" precursory model, the efficiency-evaluating model and the parameter selection of individual earthquake forecast model based on optimal efficiency are of certain revelatory and practicable meanings for developing knowledge about precursors, investigating the laws of earthquake preparation and searching for optimal forecasting methods.
