Core-shell mesoporous carbon hollow spheres as Se hosts for advanced Al-Se batteries

Incorporating a selenium(Se)positive electrode into aluminum(Al)-ion batteries is an effective strategy for improving the overall battery performance.However,the cycling stability of Se positive electrodes has challenges due to the dissolution of intermediate reaction products.In this work,we aim to harness the advantages of Se while reducing its limitations by preparing a core-shell mesoporous carbon hollow sphere with a titanium nitride(C@TiN)host to load 63.9wt%Se as the positive electrode material for Al-Se batteries.Using the physical and chemical confinement offered by the hollow mesoporous carbon and TiN,the obtained core-shell mesoporous carbon hollow spheres coated with Se(Se@C@TiN)display superior utilization of the active material and remarkable cycling stability.As a result,Al-Se batteries equipped with the as-prepared Se@C@TiN composite positive electrodes show an initial discharge specific capacity of 377 mAh·g^(-1)at a current density of 1000 mA·g^(-1)while maintaining a discharge specific capacity of 86.0 mAh·g^(-1)over 200 cycles.This improved cycling performance is ascribed to the high electrical conductivity of the core-shell mesoporous carbon hollow spheres and the unique three-dimensional hierarchical architecture of Se@C@TiN.

Pharmacodynamic Experiment of Dachengqi Decoction and Separated Decoction on Incomplete Intestinal Obstruction in Rats

[Objectives]To investigate the effect and mechanism of Dachengqi Decoction and separated decoction on incomplete intestinal obstruction in rats.[Methods]80 healthy SD rats were selected to establish incomplete intestinal obstruction model by silk ligation.The dosage was 20 mL/kg for 3 d,and the damage index of ileocecal mucosa was analyzed;the morphology of ileocecal mucosa was observed by HE staining;the serum levels of IL-1α,IL-1β,IL-6,IL-18,Ach,NO,ET,IL-1,TNF-αand ultra-micro Na+-K+-ATPase were detected by ELISA.[Results]Compared with the model group,the mucosal damage index of Dachengqi Decoction and each separated decoction group decreased significantly(P<0.05);compared with the normal group and sham operation group,the serum level of IL-1,IL-6,TNF-αand other factors in the model group increased significantly(P<0.05);compared with the model group,the serum IL-1,IL-6 and TNF-αsecretion levels of rats in Dachengqi Decoction group and separated decoction group decreased(P<0.01).[Conclusions]Dachengqi Decoction and each separated decoction can effectively improve intestinal tissue pathological damage in the incomplete intestinal obstruction model rats,and reduce the inflammatory reaction in the rat body.

Separate-layer balanced waterflooding development technology for thick and complex carbonate reservoirs in the Middle East

Based on the waterflooding development in carbonate reservoirs in the Middle East,in order to solve the problem of the poor development effects caused by commingled injection and production,taking the thick bioclastic limestone reservoirs of Cretaceous in Iran-Iraq as an example,this paper proposes a balanced waterflooding development technology for thick and complex carbonate reservoirs.This technology includes the fine division of development units by concealed baffles and barriers,the combination of multi well type and multi well pattern,and the construction of balanced water injection and recovery system.Thick carbonate reservoirs in Iran-Iraq are characterized by extremely vertical heterogeneity,development of multi-genesis ultra-high permeability zones,and highly concealed baffles and barriers.Based on the technologies of identification,characterization,and sealing evaluation for concealed baffles and barriers,the balanced waterflooding development technology is proposed,and three types of balanced waterflooding development modes/techniques are formed,namely,conventional stratigraphic framework,fine stratigraphic framework,and deepened stratigraphic framework.Numerical simulations show that this technology is able to realize a fine and efficient waterflooding development to recover,in a balanced manner,the reserves of thick and complex carbonate reservoirs in Iran and Iraq.The proposed technology provides a reference for the development optimization of similar reservoirs.

基于Photo Sphere Viewer的轻量化可量测街景系统研究

随着新型基础测绘体系发展,测绘技术和装备不断升级,大量街景数据随着车载激光扫描工作一并被采集。针对该数据路线随机性大、密集程度高等特点,以及传统街景地图系统插件受限、扩展性不强、无法量测等局限,本文设计了基于Photo Sphere Viewer的轻量化可量测街景系统,在开源插件的基础上实现了对其组件的扩充、实现了行进方向、地图交互等系统功能的设计优化,进一步实现了基于深度图的街景地图量测功能。生产作业队伍对系统的使用结果表明,该系统可以辅助生产作业队伍进行属性采集、纹理更新、数据检查等多项工作,操作灵活便捷,且具有较强的可扩展性,便于基于生产需求进行改进调整,提高了生产效率,为新型基础测绘成果进一步深化应用提供了良好的借鉴作用。

Low-temperatures synthesis of CuS nanospheres as cathode material for magnesium second batteries

Rechargeable magnesium batteries(RMBs),as one of the most promising candidates for efficient energy storage devices with high energy,power density and high safety,have attracted increasing attention.However,searching for suitable cathode materials with fast diffusion kinetics and exploring their magnesium storage mechanisms remains a great challenge.Cu S submicron spheres,made by a facile low-temperature synthesis strategy,were applied as the high-performance cathode for RMBs in this work,which can deliver a high specific capacity of 396mAh g^(-1)at 20 mA g^(-1) and a remarkable rate capacity of 250 m Ah g^(-1)at 1000 mA g^(-1).The excellent rate performance can be assigned to the nano needle-like particles on the surface of Cu S submicron spheres,which can facilitate the diffusion kinetics of Mg^(2+).Further storage mechanism investigations illustrate that the Cu S cathodes experience a two-step conversion reaction controlled by diffusion during the electrochemical reaction process.This work could make a contribution to the study of the enhancement of diffusion kinetics of Mg2+and the reaction mechanism of RMBs.

Development and prospect of downhole monitoring and data transmission technology for separated zone water injection

This article outlines the development of downhole monitoring and data transmission technology for separated zone water injection in China.According to the development stages,the principles,operation processes,adaptability and application status of traditional downhole data acquisition method,cable communications and testing technology,cable-controlled downhole parameter real-time monitoring communication method and downhole wireless communication technology are introduced in detail.Problems and challenges of existing technologies in downhole monitoring and data transmission technology are pointed out.According to the production requirement,the future development direction of the downhole monitoring and data transmission technology for separated zone water injection is proposed.For the large number of wells adopting cable measuring and adjustment technology,the key is to realize the digitalization of downhole plug.For the key monitoring wells,cable-controlled communication technology needs to be improved,and downhole monitoring and data transmission technology based on composite coiled tubing needs to be developed to make the operation more convenient and reliable.For large-scale application in oil fields,downhole wireless communication technology should be developed to realize automation of measurement and adjustment.In line with ground mobile communication network,a digital communication network covering the control center,water distribution station and oil reservoir should be built quickly to provide technical support for the digitization of reservoir development.

Deep learning enabled single-shot absolute phase recovery in high-speed composite fringe pattern profilometry of separated objects

A recent article in the Opto-Electronic Advances(OEA)journal from Prof.Qian Chen and Prof.Chao Zuo’s group introduced a new and efficient 3D imaging system that captures high-speed images using deep learning-enabled fringe projection profilometry(FPP).In this News&Views article,we explore potential avenues for future advancements,including expanding the measurement range through an extended number-theoretical approach,enhancing quality through the incorporation of horizontal fringes,and integrating data from other modalities to broaden the system's applications.

An Improved Approach for Interaction of Wave with Floating Spheres and Its Applications

To develop and utilize marine resources in the deep sea, the higher requirements for floating structures, which are operated in marine environment for a long term, have been put forward. Reasonable structure type and accurate force analysis are favorable guarantees to improve the survival performance and working performance of the floating structures. Floating spheres fastened by mooring cable were widely used in floating structures. In this paper, the wave forces of the floating sphere are efficiently and accurately calculated by solving the geometric relationship between the non-submerged floating sphere and wave surface. Combined with the hydrodynamic calculation of mooring cables based on the lumped mass method, the coupled motion model of multi-floating spheres fastened by multi-mooring cable was established under wave action. Furthermore, according to the floating structures fastened by mooring cable in the actual ocean engineering, the topological method of multi-mooring cables fastening the multifloating spheres was expounded from simple to complex. Finally, the modeling method and preliminarily hydrodynamic characteristics of the fastened floating structures, including the mooring system of renewable energy devices, ocean buoy, and coral nursery, were presented and analyzed in detail. The obtained results showed that the method for calculating the wave force on the floating sphere developed in this paper can accurately describe the motion process of the floating mooring sphere and the force on the mooring cable. Also, the topological method of multiple buoys and multiple mooring cables could efficiently establish various numerical hydrodynamic models of fastened buoys in ocean engineering.

Strength and failure characteristics of marble spheres subjected to paired point loads

Failure of irregular rock samples may provide implications in the rapid estimation of rock strength,which is imperative in rock engineering practice.In this work,analytical,experimental and numerical investigations were carried out to study the mechanical properties and failure characteristics of rock spheres under paired point loads.Analytical solutions indicted that with the increase in sample size(contact angle)and decrease in Poisson’s ratio,the uneven tensile stress in theta direction decreased.Then laboratory experiments were carried out to investigate the load characteristics and failure mode of spherical marble samples with different sizes subjected to a pair of diametral point loads.The discrete element method(DEM)was adopted to study the failure process of rock spheres.The effect of the sphere diameter on the point load contact angle was examined in terms of peak load,crushed zone distribution and energy dissipation.Experimental and numerical results showed that the samples primarily fail in tension,with crushed zones formed at both loading points.With increase in the sample size,the contact angle,crushed area and total work increase.As the specimen diameter increases from 30 mm to 50 mm,the peak load on the specimen increases from 3.6 kN to 8.8 kN,and the percentage of crushed zone(ratio of crushing zone to sample radius,d/r)increased from 0.191 to 0.262.The results of the study have implications for understanding the failure of irregular rock specimens under point loading conditions and their size effects.

ON THE FIGIEL TYPE PROBLEM AND EXTENSION OFε-ISOMETRY BETWEEN UNIT SPHERES

This paper studies two isometric problems between unit spheres of Banach spaces.In the first part,we introduce and study the Figiel type problem of isometric embeddings between unit spheres.However,the classical Figiel theorem on the whole space cannot be trivially generalized to this case,and this is pointed out by a counterexample.After establishing this,we find a natural necessary condition required by the existence of the Figiel operator.Furthermore,we prove that when X is a space with the T-property,this condition is also sufficient for an isometric embedding T:S_(X)→S_(Y) to admit the Figiel operator.This answers the Figiel type problem on unit spheres for a large class of spaces.In the second part,we consider the extension of bijectiveε-isometries between unit spheres of two Banach spaces.It is shown that every bijectiveε-isometry between unit spheres of a local GL-space and another Banach space can be extended to be a bijective 5ε-isometry between the corresponding unit balls.In particular,whenε=0,this recovers the MUP for local GL-spaces obtained in[40].

Electrochemical hydrogen evolution efficiently boosted by interfacial charge redistribution in Ru/MoSe_(2) embedded mesoporous hollow carbon spheres

The strong metal-support interaction inducing combined effect plays a crucial role in the catalysis reaction. Herein, we revealed that the combined advantages of MoSe_(2), Ru, and hollow carbon spheres in the form of Ru nanoparticles(NPs) anchored on a two-dimensionally ordered MoSe_(2) nanosheet-embedded mesoporous hollow carbon spheres surface(Ru/MoSe_(2)@MHCS) for the largely boosted hydrogen evolution reaction(HER) performance. The combined advantages from the conductive support, oxyphilic MoSe_(2), and Ru active sites imparted a strong synergistic effect and charge redistribution in the Ru periphery which induced high catalytic activity, stability, and kinetics for HER. Specifically, the obtained Ru/MoSe_(2)@MHCS required a small overpotential of 25.5 and 38.4 mV to drive the kinetic current density of 10 mA cm^(-2)both in acid and alkaline media, respectively, which was comparable to that of the Pt/C catalyst. Experimental and theoretical results demonstrated that the charge transfer from MoSe_(2) to Ru NPs enriched the electronic density of Ru sites and thus facilitated hydrogen adsorption and water dissociation. The current work showed the significant interfacial engineering in Ru-based catalysts development and catalysis promotion effect understanding via the metal-support interaction.

Preparation of Silica Nanosphere with Vertical Pore and Its Application in Oil-water Separation

Uniform monodispersed mesoporous silica nanospheres with vertical pores were successfully synthesized using chiral amphiphilic small molecule L-16Ala5PyClO4and solvents as dual templates via solgel transcription.The morphologies and pore sizes of silicas are adjustable by changing the type and amount of solvents in the reaction systems.With the increase of the organic solvent content,the morphologies of the obtained silica changed from nanospheres with vertical pore structures to nanosheets structures.When 1 mL of benzene,cyclohexane or toluene were used as solvents,only silica nanospheres were obtained,the BET surface areas of silica nanospheres reached 600.7,669.5,and 560.8 m^(2)/g,respectively.The pore sizes were 3.51,3.54,and 3.46 nm,respectively.Significantly,these ordered silica nanospheres/poly(vinyl alcohol-co-ethylene)(PVAco-PE)nanofiber membranes have high separation efficiencies(>99%)for n-hexane/water mixtures.

Investigation of the interaction between NS-DBD plasma-induced vortexes and separated flow over a swept wing

The effect of nanosecond pulsed dielectric barrier discharge(NS-DBD) plasma flow separation control is closely related to the actuation frequency,because it involves the interaction between plasma-induced vortexes and separated flow.In order to study the mechanism of NS-DBD plasma flow separation control over a swept wing,especially the influence of the actuation frequency,at first,experimental studies of the actuation frequencies at 100 Hz are conducted to validate the numerical simulation method.Then,numerical studies of different actuation frequencies which are 50 Hz,100 Hz,160 Hz,200 Hz,500 Hz,and 1000 Hz,respectively are conducted.The interaction between the plasma-induced vortexes and the separated flow is analyzed.Results show that there is a range of the actuation frequency which includes the frequency(160 Hz) calculated by the average aerodynamic chord length to make the control effect good,but when the actuation frequencies are too low(50 Hz) or too high(1000 Hz),the control effect will get worse.The former is because plasmainduced vortexes disappear in a period within an actuation cycle;the latter is because plasma-induced vortexes cannot develop completely,resulting in a weak vortex intensity.

A Novel Scheme for Separate Training of Deep Learning-Based CSI Feedback Autoencoders

In this paper, we introduce a novel scheme for the separate training of deep learning-based autoencoders used for Channel State Information (CSI) feedback. Our distinct training approach caters to multiple users and base stations, enabling independent and individualized local training. This ensures the more secure processing of data and algorithms, different from the commonly adopted joint training method. To maintain comparable performance with joint training, we present two distinct training methods: separate training decoder and separate training encoder. It’s noteworthy that conducting separate training for the encoder can pose additional challenges, due to its responsibility in acquiring a compressed representation of underlying data features. This complexity makes accommodating multiple pre-trained decoders for just one encoder a demanding task. To overcome this, we design an adaptation layer architecture that effectively minimizes performance losses. Moreover, the flexible training strategy empowers users and base stations to seamlessly incorporate distinct encoder and decoder structures into the system, significantly amplifying the system’s scalability. .

Measurement and simulation of the leakage neutron spectra from Fe spheres bombarded with 14 MeV neutrons

Iron is commonly used as a structural and shielding material in nuclear devices. The accuracy of its nuclear data is critical for the design of nuclear devices. The evaluation data of ^(56)Fe isotopes in the latest version of the CENDL-3.2 library from China was significantly updated. This new data must be tested before it can be used. To test the reliability of this data and assess the shielding effect, a shielding benchmark experiment was conducted with natural Fe spherical samples using a pulsed deuterium–tritium neutron source at the China Institute of Atomic Energy(CIAE). The leakage neutron spectra from the natural spherical iron samples with different thicknesses(4.5, 7.5, and 12 cm) were measured between 0.8 and 16 MeV after interacting with 14 MeV neutrons using the time-of-flight method. The simulation results were obtained by Monte Carlo simulations by employing the Fe data from the CENDL-3.2, ENDF/B-VIII.0, and JEDNL-5.0 libraries. The measured and simulated leakage neutron spectra and penetration rates were compared, demonstrating that the CENDL-3.2 library performs sufficiently overall. The simulation results of the other two libraries were underestimated for scattering at the continuum energy level.

Decoupled thermal–hydraulic analysis of an air-cooled separated heat pipe for spent fuel pools under natural convection

An investigation of the decoupled thermal–hydraulic analysis of a separated heat pipe spent fuel pool passive cooling system(SFS)is essential for practical engineering applications.Based on the principles of thermal and mass balance,this study decoupled the heat transfer processes in the SFS.In accordance with the decoupling conditions,we modeled the spent fuel pool of the CAP1400 pressurized water reactor in Weihai and used computational fluid dynamics to explore the heat dissipation capacity of the SFS under different air temperatures and wind speeds.The results show that the air-cooled separated heat pipe radiator achieved optimal performance at an air temperature of 10℃ or wind speed of 8 m/s.Fitted equations for the equivalent thermal conductivity of the separated heat pipes with the wind speed and air temperature we obtained according to the thermal resistance network model.This study is instructive for the actual operation of an SFS.

Robust,fluorine-free and superhydrophobic composite melamine sponge modified with dual silanized SiO_(2) microspheres for oil-water separation

Massive oily wastewater discharged from industrial production and human daily life have been an urgent environmental and ecological challenge.Superhydrophobic materials have attracted tremendous attention due to their unique properties and potential applications in the treatment of wastewater.In this study,a novel superhydrophobic/superoleophilic composite melamine sponge modified with dual silanized SiO_(2) microspheres was fabricated simply by a two-step sol-gel method using vinyltriethoxysilane and hexadecyltrimethoxysilane as functional agent,which exhibited a water contact angle of 153.2°and a water sliding contact angle of 4.8°.Furthermore,the composite sponge showed the excellent oil adsorption performance and the compressive elasticity reaching up to 130 g·g^(-1) of dichloromethane and 33.1 kPa of compressive stress.It was worth noting that the composite sponge presented the excellent separation efficiency(up to 99.5%)in the processes of continuous oil/water separation.The robust superhydrophobic composite melamine sponge provided the possibility with the practical application for oil-water separation.

Short- and long-term results of open vs laparoscopic multisegmental resection and anastomosis for synchronous colorectal cancer located in separate segments

BACKGROUND It remains unclear whether laparoscopic multisegmental resection and ana-stomosis(LMRA)is safe and advantageous over traditional open multisegmental resection and anastomosis(OMRA)for treating synchronous colorectal cancer(SCRC)located in separate segments.AIM To compare the short-term efficacy and long-term prognosis of OMRA as well as LMRA for SCRC located in separate segments.METHODS Patients with SCRC who underwent surgery between January 2010 and December 2021 at the Cancer Hospital,Chinese Academy of Medical Sciences and the Peking University First Hospital were retrospectively recruited.In accordance with the RESULTS LMRA patients showed markedly less intraoperative blood loss than OMRA patients(100 vs 200 mL,P=0.006).Compared to OMRA patients,LMRA patients exhibited markedly shorter postoperative first exhaust time(2 vs 3 d,P=0.001),postoperative first fluid intake time(3 vs 4 d,P=0.012),and postoperative hospital stay(9 vs 12 d,P=0.002).The incidence of total postoperative complications(Clavien-Dindo grade:≥II)was 2.9%and 17.1%(P=0.025)in the LMRA and OMRA groups,respectively,while the incidence of anastomotic leakage was 2.9%and 7.3%(P=0.558)in the LMRA and OMRA groups,respectively.Furthermore,the LMRA group had a higher mean number of lymph nodes dissected than the OMRA group(45.2 vs 37.3,P=0.020).The 5-year overall survival(OS)and disease-free survival(DFS)rates in OMRA patients were 82.9%and 78.3%,respectively,while these rates in LMRA patients were 78.2%and 72.8%,respectively.Multivariate prognostic analysis revealed that N stage[OS:HR hazard ratio(HR)=10.161,P=0.026;DFS:HR=13.017,P=0.013],but not the surgical method(LMRA/OMRA)(OS:HR=0.834,P=0.749;DFS:HR=0.812,P=0.712),was the independent influencing factor in the OS and DFS of patients with SCRC.CONCLUSION LMRA is safe and feasible for patients with SCRC located in separate segments.Compared to OMRA,the LMRA approach has more advantages related to short-term efficacy.

CLASSIFICATIONS OF DUPIN HYPERSURFACES IN LIE SPHERE GEOMETRY

This is a survey of local and global classification results concerning Dupin hypersurfaces in S^(n)(or R^(n))that have been obtained in the context of Lie sphere geometry.The emphasis is on results that relate Dupin hypersurfaces to isoparametric hypersurfaces in spheres.Along with these classification results,many important concepts from Lie sphere geometry,such as curvature spheres,Lie curvatures,and Legendre lifts of submanifolds of S^(n)(or R^(n)),are described in detail.The paper also contains several important constructions of Dupin hypersurfaces with certain special properties.

Direct capture and separation of CO_(2) from air

Direct air capture(DAC)has attracted increasing interest and investment over the past few years.There are a fast-growing number of companies that entered the field and demonstrated DAC carbon removal setups and potential.However,current DAC methods are still based on solid absorbents or alkali solutions approaches which have low capture efficiency and low energy efficiency.This highlight proposed a promising CO_(2) capture technology,an electric energy driven closed-loop system for the direct removal of CO_(2) from ambient air which are based on two individual technologies:Polyam-N-Cu hybrid system promoted CO_(2) capture with ocean as anthropogenic CO_(2) sink and a chloride-mediated electrochemical pH swing system to remove CO_(2) from oceanwater.