“三创五育”背景下“双一流”高校本科人才培养的DIE模式初探及评价

针对新时代背景下“双一流”高校人才培养的发展需求,在“三创五育”理念指导下,解析基于产学研合作理论引入的DIE模式的内涵,系统阐述了DIE理念贯彻下的教学系统设计并付诸实践,旨在打破教学系、研究所、企业之间的壁垒,为学生学习、实践提供更多样化的渠道。问卷调查结果表明DIE模式在本科生团队协作、学术创造、自信心树立等方面有切实作用,为培养全面发展的高素质本科人才提供了参考。

余交换Hopf代数上Yang-Baxter方程的解

研究了Hopf brace的一些性质,并利用Rota-Baxter算子和Hopf brace探索了在余交换Hopf代数上Yang-Baxter方程的解,并给出了解在余交换Hopf代数k[G]上的具体形式.

Thin-walled and large-sized magnesium alloy die castings for passenger car cockpit:Application,materials,and manufacture

In order to effectively reduce energy consumption and increase range mile,new energy vehicles represented by Tesla have greatly aroused the application of integrated magnesium(Mg)alloy die casting technology in automobiles.Previously,the application of Mg alloys in automobiles,especially in automotive cockpit components,is quite extensive,while it has almost disappeared for a period of time due to its relatively high cost,causing a certain degree of information loss in the application technology of Mg alloy parts in automobiles.The rapid development of automotive technology has led to a higher requirement for the automotive components compared with those traditional one.Therefore,whatever the components themselves,or the Mg alloy materials and die casting process have to face an increasing challenge,needing to be upgraded.In addition,owing to its high integration characteristics,the application of Mg alloy die casting technology in large-sized and thin-walled automotive parts has inherent advantages and needs to be expanded urgently.Indeed,it necessitates exploring advance Mg alloys and new product structures and optimizing die casting processes.This article summarizes and analyzes the development status of thin-walled and large-sized die casting Mg alloy parts in passenger car cockpit and corresponding material selection methods,die casting processes as well as mold design techniques.Furthermore,this work will aid researchers in establishing a comprehensive understanding of the manufacture of thin-walled and large-sized die casting Mg alloy parts in automobile cockpit.It will also assist them in developing new Mg alloys with improved comprehensive performance and new processes to meet the high requirements for die casting automotive components.

Compression properties of cost-efficient porous expanded clay reinforced AA7075 syntactic foams fabricated by industrial-oriented die casting technology

In today’s manufacturing industries,hard competition between rival firms makes it compulsory for researchers to design lighter and cheaper machine components due to the megatrends of cost-effectiveness and anti-pollution.At this point,aluminum syntactic foams(ASFs)are new-generation engineering composites and come into the upfront as a problem-solver.Owing to their features like low density,sufficient elongation,and perfect energy absorption ability,these advanced foams have been considerably seductive for many industrial sectors nowadays.In this study,an industrial-oriented automatic die casting technology was used for the first time to manufacture the combination of AA7075/porous expanded clay(PEC).Micro evaluations(optical and FESEM)reveal that there is a homogenous particle distribution in the foam samples,and inspections are compatible with the other ASF studies.Additionally,T6 aging heat treatment was operated on one half of the produced foams to explore the probable impact of aging on the compressive responses.Attained results show that PEC particles can be an alternative to expensive hollow spheres used in the previous works.Besides,a favorable relationship is ascertained between the aging treatment and mechanical properties such as compression strength and plateau strength.

Effect of slow shot speed on externally solidified crystal,porosity and tensile property in a newly developed high-pressure die-cast Al-Si alloy

The effect of slow shot speed on externally solidified crystal(ESC),porosity and tensile property in a newly developed high-pressure die-cast Al-Si alloy was investigated by optical microscopy(OM),scanning electron microscopy(SEM)and laboratory computed tomography(CT).Results showed that the newly developed AlSi9MnMoV alloy exhibited improved mechanical properties when compared to the AlSi10MnMg alloy.The AlSi9MnMoV alloy,which was designed with trace multicomponent additions,displays a notable grain refining effect in comparison to the AlSi10MnMg alloy.Refining elements Ti,Zr,V,Nb,B promote heterogeneous nucleation and reduce the grain size of primaryα-Al.At a lower slow shot speed,the large ESCs are easier to form and gather,developing into the dendrite net and net-shrinkage.With an increase in slow shot speed,the size and number of ESCs and porosities significantly reduce.In addition,the distribution of ESCs is more dispersed and the net-shrinkage disappears.The tensile property is greatly improved by adopting a higher slow shot speed.The ultimate tensile strength is enhanced from 260.31 MPa to 290.31 MPa(increased by 11.52%),and the elongation is enhanced from 3.72%to 6.34%(increased by 70.52%).

Characteristics and distribution of microstructures in high pressure die cast alloys with X-ray microtomography:A review

Al and Mg alloy high pressure die castings(HPDC)are increasingly used in automotive industries.The microstructures in the castings have decisive effect on the casting mechanical properties,in which the microstructure characteristics are fundamental for the investigation of the microstructure-property relation.During the past decade,the microstructure characteristics of HPDC Al and Mg alloys,especially micro-pores andα-Fe,have been investigated from two-dimensional(2D)to threedimensional with X-ray micro-computed tomography(μ-CT).This paper provides an overview of the current understanding regarding the 3D characteristics and formation mechanisms of microstructures in HPDC alloys,their spatial distributions,and the impact on mechanical properties.Additionally,it outlines future research directions for the formation and control of heterogeneous microstructures in HPDC alloys.

三维单左对称代数上的Nijenhuis算子和经典Yang-Baxter方程解

为了研究三维复单左对称代数上的Nijenhuis算子,通过求解结构常数构成的二次方程组,对三维复单左对称代数上的Nijenhuis算子进行了刻画.此外,利用所得结果,给出了半直积邻接李代数上的经典Yang-Baxter方程的解.

Beyond Gender Perspectives:A More Comprehensive Examination of Yang Yi’s Translation of Wuthering Heights

The renowned translator Yang Yi passed away in 2023.Many scholars argue that,influenced by their biological gender,female translators often employ translation methods in adherence to feminist translation or reflect characteristics typical of female translators.This study examines the translation of Wuthering Heights by Yang Yi,focusing on whether there is a definite influence of gender on translator behavior.While existing literature primarily analyzes Yang Yi’s work through a feminist lens,this research takes a broader approach.By considering the translator’s social background and translation practice,this paper challenges the assumption that her work strictly aligns with feminist translation theories.Instead,this study emphasizes the importance of considering diverse factors when interpreting translated works,moving beyond a singular gender-based standpoint.

A study on the treatment of chloasma with moxibustion based on the theory of“Yang transforming Qi,and Yin shaping”

Background:“Yang Transforming Qi and Yin shaping”comes from“Plain Question Yin and Yang should be like the theory”.Chinese medicine believes that the imbalance of yin and yang is the cause of human diseases.One of the strengths of TCM in treating diseases is holistic regulation.The theory of“Yang transforming Qi,and Yin shaping”implies a strong holistic view.Chloasma,one of the common skin diseases,seriously affects the physical and mental health of patients due to its unclear etiology,difficult treatment and easy recurrence.The occurrence and development of chloasma are closely related to internal organs.This paper is based on the theory of internal meridian,“Yang transforming Qi,and Yin shaping”which attaches importance to the concept of“Yang Qi”,from a new understanding of the pathogenesis etiology of chloasma.Methods:The author believes that the incidence of the disease is the deficiency of Yang Qi,which can’t promote the movement of Qi and blood to nourish the face,resulting in tangible material condensation,so proposes that this disease needs to be promoted by Yang transforming Qi and warm to dissipate.Moxibustion belongs to the fire,and its warming effect can dissipate the tangible evil.Results:Combined with clinical practice and the theory of internal meridian,the author elaborated that moxibustion is one of the effective methods for treating chloasma,which provides a new way of thinking for the treatment of chloasma.Conclusion:“Yang Transforming Qi and Yin shaping”can be used to guide the treatment of chloasma.

Observation on the Nursing Effect of Ginger Moxibustion on Gastrointestinal Symptoms in Patients with Heart Failure Due to Yang Qi Deficiency

Objective:To evaluate the nursing measures and effects of ginger moxibustion in the treatment of heart failure(yang qi deficiency type)with gastrointestinal symptoms.Methods:86 patients with heart failure(yang qi deficiency type)accompanied by gastrointestinal symptoms who were admitted to the hospital between January 2023 and January 2024 were selected and divided into 43 cases in each group by random number table grouping;Group I implemented integrated care,while Group II adopted conventional care.The indicators of care were compared between the two groups.Results:After the nursing care,the digestive symptom scores of Group I were lower than those of Group I,and the psychological scores were lower than those of Group II(P<0.05).Conclusion:Ginger moxibustion can improve gastrointestinal symptoms and enhance the psychological health of patients with heart failure(yang qi deficiency type)with gastrointestinal symptoms.

Clinical Nursing Intervention of Moxibustion on Abdominal Distension Symptoms in Heart Failure (Heart and Kidney Yang Deficiency and Blood Stasis Blocking Collaterals Syndrome)

Objective:To investigate the clinical nursing intervention effect of moxibustion on abdominal distension symptoms in heart failure(heart and kidney yang deficiency and blood stasis blocking collaterals syndrome).Methods:62 patients with heart failure(heart and kidney yang deficiency and blood stasis blocking collaterals syndrome)admitted to our hospital from February 2023 to February 2024 were selected and divided into the observation group(n=31)and the control group(n=31)by using the random numerical table method.The control group adopted conventional nursing interventions,and the observation group received the nursing program of the control group with the addition of moxibustion nursing interventions.The nursing effectiveness,quality of life scores,and nursing satisfaction were compared between the two groups.Results:The nursing effectiveness of the observation group was significantly higher than the control group(P<0.05);the quality of life score of the observation group was significantly higher than the control group(P<0.05);the nursing satisfaction of the observation group was significantly higher than that of the control group(P<0.05).Conclusion:The use of moxibustion nursing intervention in patients with heart failure(heart and kidney yang deficiency and blood stasis blocking collaterals syndrome)can effectively relieve the symptoms of abdominal distension,improve patients'quality of life,and increase nursing satisfaction,which has promotion and application values.

Determination of wax pattern die profile for investment casting of turbine blades

In order to conform to dimensional tolerances, an efficient numerical method, displacement iterative compensation method, based on finite element methodology （FEM） was presented for the wax pattern die profile design of turbine blades. Casting shrinkages at different positions of the blade which was considered nonlinear thermo-mechanical casting deformations were calculated. Based on the displacement iterative compensation method proposed, the optimized wax pattern die profile can be established. For a A356 alloy blade, substantial reduction in dimensional and shape tolerances was achieved with the developed die shape optimization system. Numerical simulation result obtained by the proposed method shows a good agreement with the result measured experimentally. After four times iterations, compared with the CAD model of turbine blade, the total form error decreases to 0.001 978 mm from the orevious 0.515 815 mm.

Low cycle fatigue behavior of T4-treated Al-Zn-Mg-Cu alloys prepared by squeeze casting and gravity die casting

Gravity die casting(GC) and squeeze casting(SC) T4-treated Al-7.0Zn-2.5Mg-2.1Cu alloys were employed to investigate the microstructures,mechanical properties and low cycle fatigue(LCF) behavior.The results show that mechanical properties of SC specimens are significantly better than those of GC specimens due to less cast defects and smaller secondary dendrite arm spacing(SDAS).Excellent fatigue properties are obtained for the SC alloy compared with the GC alloy.GC and SC alloys both exhibit cyclic stabilization at low total strain amplitudes(less than 0.4%) and cyclic hardening at higher total strain amplitudes.The degree of cyclic hardening of SC samples is greater than that of GC samples.Fatigue cracks of GC samples dominantly initiate from shrinkage porosities and are easy to propagate along them,while the crack initiation sites for SC samples are slip bands,eutectic phases and inclusions at or near the free surface.

Oxide distribution and microstructure in welding zones from porthole die extrusion

The oxide distribution and microstructure in longitudinal and transverse welding zones during the billet-to-billet extrusion process through porthole die were adequately investigated by means of finite element method,scanning electron microscopy and optical microscopy.The results indicate that the oxides exist at the interface between the matrix and transverse welding zone rather than longitudinal welding seam.The longitudinal welding zone reveals a darker band including the largest grain with irregular shape due to the abnormal grain growth under the heavy shear deformation and high temperature.The transverse welding zone consists of equiaxed recrystallized grains which are a little finer than those in the longitudinal welding seam.

Primary Study on the Protection and Development Planning of Antiquity Gardens——A Case Study of "Temple of YANG Shengan and Guihu Lake"

Through exploring and studying the rebuilding and protection planning of the Temple of YANG Shengan and Guihu Lake,the design principles and experience of rebuilding and protecting gardens of antiquity were summarized,the effective approaches to integrate the rebuilding design and the protection of relics were explored and the suggestions for the protection and development of antiquity gardens were put forward.

Simulation of extrusion process of complicated aluminium profile and die trial

The arbitrary Lagrangian-Eulerian（ALE） adaptive remeshing technology and the HyperXtrude software of transient finite element simulations were used on analogue simulation of aluminium extrusion processing.The field distributions of strain rate,stress,temperature and velocity of metal flow were obtained.The results are basically consistent with the experiment,which indicates that this method may successfully predict the defects in the actual extrusion process.

异构YANG模型驱动的网络领域知识图谱构建

随着网络规模持续扩大,复杂且异构的网络环境给网络的自动化配置管理带来了严峻的挑战,现有的网络智能化运维方案缺少知识层面的统一数据模型,难以有效进行网络大数据处理.YANG作为一种数据建模语言,用于对网络配置管理协议NETCONF传输的配置与状态数据进行建模.提出一种YANG模型驱动的网络领域知识图谱构建方案,该方案基于YANG语言规范,提出网络知识本体构建的基本原则,形成包含51个类、70余种属性的本体结构;随后对来自不同标准化组织和厂商的异构YANG模型,进行数据抽取和实例化生成单源知识图谱,进而利用YANG模型之间存在的异构共指特性,采用实体对齐方法建立模型间的语义映射关系,形成网络领域知识图谱.该知识图谱可为网络运维大数据的生成与维护提供统一的语义框架,无须再进行手工的运维本体构建,从而极大地简化网络的配置管理与运行维护,为网络性能优化和异常检测等运维难题提供新的解决思路.

Vacuum assisted high-pressure die casting of AZ91D magnesium alloy at different slow shot speeds

The effects of vacuum assistance on the microstructure and mechanical properties of high-pressure die cast AZ91 D alloy at different slow shot speeds were evaluated. Plate-shaped castings of AZ91 D alloy were carried out on a TOYO BD-350V5 cold chamber die casting machine incorporated with a self-improved TOYO vacuum system. It was found that the vacuum pressure in the die cavity at the beginning of mold filling increases with the increase of slow shot speed, following a cubic polynomial curve, resulting in a decline in the porosity-reduction ability of vacuum assistance with the increase of slow shot speed. The externally solidified crystal（ESC） contents in conventional and vacuum die castings behave similar against the slow shot speed. The tensile properties of vacuum die castings were strongly influenced by the ESC content at relative low slow shot speeds. With the increase of slow shot speed, the influence of the gas porosity level in vacuum die castings would get prominent.

Extrusion force analysis of aluminum pipe fabricated by CASTEX using expansion combination die

To determine the extrusion force of pipe fabricated by continuous casting and extrusion (CASTEX) using an expansion combination die, the metallic expansion combination die was divided into diversion zone, expansion zone, flow dividing zone, welding chamber, and sizing zone, and the corresponding stress formulae in various zones were established using the slab method. The deformation zones of CASTEX groove were divided into liquid and semisolid zone, solid primary gripping zone, and solid gripping zone, and the formulae of pipe extrusion forces were established. Experiments were carried out on the self-designed CASTEX machine to obtain the aluminum pipe and measure its extrusion force using the expansion combination die. The experimental results of radial extrusion force for aluminum pipe are in good agreement with the calculated ones.

Effects of shot speed and biscuit thickness on externaly solidified crystals of high-pressure diet cast AM60B magnesium alloy

Standard mechanical test bars with a diameter of 6.4 mm and a gauge length of 50 mm were processed, and the microstructures of die cast AM60B alloy under different die casting process parameters were observed. The influences of the slow shot speed, the fast shot speed and the biscuit thickness on the externally solidified crystals （ESCs） were investigated. With the increase of the biscuit thickness, the number of the ESCs in the cast samples decreases. Under a low slow shot speed, larg ESCs are found in the cast structure and a high fast shot speed results in more spherical ESCs. The relationships between ESCs and process parameters were also discussed.